Re: [PATCH 1/4] initial support for LogicPD's OMAP3 SOM and TORPEDO development kits

[Kevin Hilman]

Jacob Tanenbaum <Jacob.Tanenbaum@xxxxxxxxxxx> writes:

> 	Adding LogicPD OMAP3 board support
>
>          Adding support for LogicPD's OMAP 3530 LV SOM and
>          OMAP 35x Torpedo board.
> 	 
> 	 Tested against: linux-next 81e09f50c93edff607259cbe374a3006c9c5fa74
>          Signed-off-by: Jacob Tanenbaum <Jacob.Tanenbaum@xxxxxxxxxxx>

[...]

> +/* Micron MT46H32M32LF-6 */
> +/* FIXME: borrowed from sdram-micron-mt46h32m32lf-6.h because on LogicPD
> + * boards we can't use the default values -- why? I suspect the reason
> + * lies in the boot strap code. We correct this part if we have ported
> + * U-Boot and X-Load. */

Another option here instead of re-defining the struct is to includ the
original header and just change the values you need to.  That way
you can describe the reasons behind the values that are changing.

[...]

> +static struct omap_board_config_kernel omap3logic_config[] __initdata = {
> +};
> +
> +static void __init omap3logic_init_irq(void)
> +{
> +	omap_board_config = omap3logic_config;
> +	omap_board_config_size = ARRAY_SIZE(omap3logic_config);
> +	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
> +				mt46h32m32lf6_sdrc_params);
> +	omap_init_irq();
> +#ifdef CONFIG_OMAP_32K_TIMER
> +	omap2_gp_clockevent_set_gptimer(12);
> +#endif

Why do you need GPT12?

Was this a copy-paste from Beagle?  Certain revs of beagle had this
limitation due to a board design problem, so unless you've inherited the
same board-design problem, you should be find with the default.


Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/