RE: [PATCH 2/4] Low-level initialization for hsmmc controller on LogicPD's OMAP3 SOM and TORPEDO dev kits

[Jacob Tanenbaum]

-----Original Message-----
From: Felipe Balbi [mailto:felipe.balbi@xxxxxxxxx] 
Sent: Wednesday, August 11, 2010 1:26 PM
To: Jacob Tanenbaum
Cc: linux@xxxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx;
linux-kernel@xxxxxxxxxxxxxxx; rmk@xxxxxxxxxxxxxxxx; tony@xxxxxxxxxxx
Subject: Re: [PATCH 2/4] Low-level initialization for hsmmc controller
on LogicPD's OMAP3 SOM and TORPEDO dev kits

Hi,

On Wed, Aug 11, 2010 at 06:31:35PM +0200, ext Jacob Tanenbaum wrote:
>+#define OMAP3_TORPEDO_MMC_GPIO_WP               (-EINVAL)

this one isn't used anywhere, why adding it ?

will fix

>+static struct regulator_init_data omap3logic_vmmc1 = {
>+	.constraints = {
>+		.name			= "VMMC1",
>+		.min_uV			= 1850000,
>+		.max_uV			= 3150000,
>+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
>+					| REGULATOR_MODE_STANDBY,
>+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
>+					| REGULATOR_CHANGE_MODE
>+					| REGULATOR_CHANGE_STATUS,
>+	},
>+	.num_consumer_supplies  = 1,
>+	.consumer_supplies      = &omap3logic_vmmc1_supply,
>+};
>+
>+
>+

one blank line only.

Will fix 

>+	} else {
>+		printk(KERN_ERR "%s(): unknown machine type\n",
__func__);
>+	return;

indentation is wrong.

Will fix

>+	omap2_hsmmc_init(board_mmc_info);
>+	/* link regulators to MMC adapters */
>+	omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
>+}
>+
>+
>+

one blank line only.

Will fix

> 	/* Ensure SDRC pins are mux'd for self-refresh */
>-/*	omap_cfg_reg(H16_34XX_SDRC_CKE0);
>-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
>-	omap_cfg_reg(SDRC_CKE0);
>-	omap_cfg_reg(SDRC_CKE1); */

this shouldn't even be here in the first place. :-)

I removed this code and made a mistake in the rebase, it is removed in
patch 4 will fix

-- 
balbi

DefectiveByDesign.org
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/