Re: [BUG] object: is not initialized, yet kobject_put() is beingcalled

[Markus Trippelsdorf]

On Thu, Aug 12, 2010 at 01:45:13PM +0200, Markus Trippelsdorf wrote:
> On Thu, Aug 12, 2010 at 01:36:24PM +0200, Markus Trippelsdorf wrote:
> > On Thu, Aug 12, 2010 at 01:18:15PM +0200, Jiri Kosina wrote:
> > > On Thu, 12 Aug 2010, Markus Trippelsdorf wrote:
> > > 
> > > > On Thu, Aug 12, 2010 at 11:11:50AM +0200, Jiri Kosina wrote:
> > > > > 
> > > > > Guys, could you please send me your .config with which you are 
> > > > > experiencing the problem, so that I can try to reproduce it with it?
> > > > 
> > > > Attached.
> > > 
> > > So I had to add support for HW of mine (SATA_VIA, PATA_VIA, disabled the 
> > > radeon firmware stuff, and, most importantly, enabled UHCI, which is what 
> > > is on machine I am using now for testing), and disconnect-connect cycle 
> > > works nicely:
> > > 
> > > usb 3-2: USB disconnect, address 3
> > > usb 3-2: new low speed USB device using uhci_hcd and address 4
> > > input: mouse USB mouse with wheel as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input6
> > > generic-usb 0003:05B8:3091.0004: input,hidraw0: USB HID v1.10 Mouse [mouse USB mouse with wheel] on usb-0000:00:10.1-2/input0
> > > input: mouse USB mouse with wheel as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input7
> > > generic-usb 0003:05B8:3091.0005: input,hidraw1: USB HID v1.10 Keyboard [mouse USB mouse with wheel] on usb-0000:00:10.1-2/input1
> > > 
> > > so still no BUG from kobject refcounting, and the hidraw numbers are the 
> > > same. The major difference seems to be that I am using UHCI and you have 
> > > your HID devices connected through OHCI, is that correct?
> > 
> > Correct. And I should add that it very easy to reproduce here; just
> > disconnecting the usb receiver triggers the WARNING.
> 
> Disabling USB_HIDDEV in my .config solves the problem (there is no
> WARNING anymore when disconnecting the receiver).

Reverting bd25f4dd6972755579d0ea50d1a5ace2e9b00d1a with USB_HIDDEV
enabled also solves the problem. So there must be a bug in that patch:

commit bd25f4dd6972755579d0ea50d1a5ace2e9b00d1a
Author: Arnd Bergmann <arnd@xxxxxxxx>
Date:   Sun Jul 11 15:34:05 2010 +0200

    HID: hiddev: use usb_find_interface, get rid of BKL
    
    This removes the private hiddev_table in the usbhid
    driver and changes it to use usb_find_interface
    instead.
    
    The advantage is that we can avoid the race between
    usb_register_dev and usb_open and no longer need the
    big kernel lock.
    
    This doesn't introduce race condition -- the intf pointer could be
    invalidated only in hiddev_disconnect() through usb_deregister_dev(),
    but that will block on minor_rwsem and not actually remove the device
    until usb_open().
    
    Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
    Cc: Jiri Kosina <jkosina@xxxxxxx>
    Cc: "Greg Kroah-Hartman" <gregkh@xxxxxxx>
    Signed-off-by: Jiri Kosina <jkosina@xxxxxxx>


-- 
»A man who doesn't know he is in prison can never escape.«
William S. Burroughs
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/