Re: [PATCH] AT91: Correct configuration define value

[Nicolas Ferre]

Le 01/07/2010 10:55, Nicolas Ferre :
> The MTD nand driver for Atmel chips is atmel_nand and not at91_nand anymore.
> Change wrong configuration variables that were remaining.
> 
> Reported-by: Christoph Egger <siccegge@xxxxxxxxx>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>

We can add:
Acked-by: Kirill A. Shutemov <kirill@xxxxxxxxxxxxx>

> ---
> Christoph,

Christoph,

Is this patch handled by you as part of your patch series or should I
include it in "Trivial" or "AT91" patch series?

Bye,

> Thank you for highlighting this. But please consider this
> patch instead of yours.
> 
>  arch/arm/mach-at91/board-at572d940hf_ek.c |    2 +-
>  arch/arm/mach-at91/board-sam9m10g45ek.c   |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
> index 5daff27..4665162 100644
> --- a/arch/arm/mach-at91/board-at572d940hf_ek.c
> +++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
> @@ -216,7 +216,7 @@ static struct atmel_nand_data __initdata eb_nand_data = {
>  /*	.rdy_pin	= AT91_PIN_PC16, */
>  	.enable_pin	= AT91_PIN_PA15,
>  	.partition_info	= nand_partitions,
> -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
> +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
>  	.bus_width_16	= 1,
>  #else
>  	.bus_width_16	= 0,
> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
> index ee80059..37af9b1 100644
> --- a/arch/arm/mach-at91/board-sam9m10g45ek.c
> +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
> @@ -135,7 +135,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
>  	.rdy_pin	= AT91_PIN_PC8,
>  	.enable_pin	= AT91_PIN_PC14,
>  	.partition_info	= nand_partitions,
> -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
> +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
>  	.bus_width_16	= 1,
>  #else
>  	.bus_width_16	= 0,


-- 
Nicolas Ferre

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/