Intel DP43BF MB - No PCI Devices detected

[Brian C. Huffman]

 I have searched and found no previous posts on this topic.  Using the 
2.6.36-rc2-git3 (and many before that rev), the kernel doesn't see my 
PCI devices.  They can be seen with dmidecode but do not show up with 
lspci (and are not mentioned on boot up).

For example, here's one of the slots (shown as In Use):
Handle 0x0038, DMI type 9, 17 bytes
System Slot Information
    Designation: PCI Slot
    Type: 32-bit PCI
    Current Usage: In Use
    Length: Short
    ID: 5
    Characteristics:
        3.3 V is provided
        Opening is shared
        PME signal is supported
    Bus Address: 0000:00:1e.0


But here's the lspci:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller 
(rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root 
Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio 
Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Root Port 1
00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Port 2
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Root Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Root Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Root Port 6
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface 
Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port 
SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port 
SATA IDE Controller #2
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 
GS] (rev a1)
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 
single-port PATA133 interface (rev b2)
06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403
07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57788 
Gigabit Ethernet PCIe (rev 01)

What can I do to further troubleshoot this?

Thanks,
Brian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/