Re: [PATCH v2 1/1] pxa168: added initial support for TPO TD043MTEA1LCD display on Aspenite
From: Mark F. Brown
Date: Wed Aug 25 2010 - 23:45:17 EST
On Wed, Aug 25, 2010 at 10:26 PM, Marek Vasut <marek.vasut@xxxxxxxxx> wrote:
> Dne Čt 26. srpna 2010 04:04:52 Mark F. Brown napsal(a):
>> Signed-off-by: Mark F. Brown <mark.brown314@xxxxxxxxx>
>> ---
>> arch/arm/mach-mmp/aspenite.c | 60
>> +++++++++++++++++++++++++++++++ arch/arm/mach-mmp/include/mach/pxa168.h |
>> 8 ++++
>> arch/arm/mach-mmp/pxa168.c | 4 ++
>> drivers/video/pxa168fb.c | 4 +-
>> 4 files changed, 74 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
>> index 0629394..9e1bd6b 100644
>> --- a/arch/arm/mach-mmp/aspenite.c
>> +++ b/arch/arm/mach-mmp/aspenite.c
>> @@ -23,6 +23,7 @@
>> #include <mach/mfp-pxa168.h>
>> #include <mach/pxa168.h>
>> #include <mach/gpio.h>
>> +#include <video/pxa168fb.h>
>>
>> #include "common.h"
>>
>> @@ -66,6 +67,36 @@ static unsigned long common_pin_config[] __initdata = {
>> GPIO115_I2S_BCLK,
>> GPIO116_I2S_RXD,
>> GPIO117_I2S_TXD,
>> +
>> + /* LCD */
>> + GPIO56_LCD_FCLK_RD,
>> + GPIO57_LCD_LCLK_A0,
>> + GPIO58_LCD_PCLK_WR,
>> + GPIO59_LCD_DENA_BIAS,
>> + GPIO60_LCD_DD0,
>> + GPIO61_LCD_DD1,
>> + GPIO62_LCD_DD2,
>> + GPIO63_LCD_DD3,
>> + GPIO64_LCD_DD4,
>> + GPIO65_LCD_DD5,
>> + GPIO66_LCD_DD6,
>> + GPIO67_LCD_DD7,
>> + GPIO68_LCD_DD8,
>> + GPIO69_LCD_DD9,
>> + GPIO70_LCD_DD10,
>> + GPIO71_LCD_DD11,
>> + GPIO72_LCD_DD12,
>> + GPIO73_LCD_DD13,
>> + GPIO74_LCD_DD14,
>> + GPIO75_LCD_DD15,
>> + GPIO76_LCD_DD16,
>> + GPIO77_LCD_DD17,
>> + GPIO78_LCD_DD18,
>> + GPIO79_LCD_DD19,
>> + GPIO80_LCD_DD20,
>> + GPIO81_LCD_DD21,
>> + GPIO82_LCD_DD22,
>> + GPIO83_LCD_DD23,
>> };
>>
>> static struct smc91x_platdata smc91x_info = {
>> @@ -134,6 +165,34 @@ static struct i2c_board_info aspenite_i2c_info[]
>> __initdata = { { I2C_BOARD_INFO("wm8753", 0x1b), },
>> };
>>
>> +static struct fb_videomode video_modes[] = {
>> + [0] = {
>> + .pixclock = 30120,
>> + .refresh = 60,
>> + .xres = 800,
>> + .yres = 480,
>> + .hsync_len = 1,
>> + .left_margin = 215,
>> + .right_margin = 40,
>> + .vsync_len = 1,
>> + .upper_margin = 34,
>> + .lower_margin = 10,
>> + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
>> + },
>> +};
>> +
>> +struct pxa168fb_mach_info aspenite_lcd_info = {
>> + .id = "Graphic Frame",
>> + .modes = video_modes,
>> + .num_modes = ARRAY_SIZE(video_modes),
>> + .pix_fmt = PIX_FMT_RGB565,
>> + .io_pin_allocation_mode = PIN_MODE_DUMB_24,
>> + .dumb_mode = DUMB_MODE_RGB888,
>> + .active = 1,
>> + .panel_rbswap = 0,
>> + .invert_pixclock = 0,
>> +};
>> +
>> static void __init common_init(void)
>> {
>> mfp_config(ARRAY_AND_SIZE(common_pin_config));
>> @@ -143,6 +202,7 @@ static void __init common_init(void)
>> pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
>> pxa168_add_ssp(1);
>> pxa168_add_nand(&aspenite_nand_info);
>> + pxa168_add_fb(&aspenite_lcd_info);
>>
>> /* off-chip devices */
>> platform_device_register(&smc91x_device);
>
>
>
> ----------------------------------------------
> ^--- one patch above
> SNIP, please split into two patches
> v--- another patch below
> ----------------------------------------------
>
>
>
>
>> diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h
>> b/arch/arm/mach-mmp/include/mach/pxa168.h index 27e1bc7..220738f 100644
>> --- a/arch/arm/mach-mmp/include/mach/pxa168.h
>> +++ b/arch/arm/mach-mmp/include/mach/pxa168.h
>> @@ -10,6 +10,7 @@ extern void __init pxa168_init_irq(void);
>> #include <mach/devices.h>
>> #include <plat/i2c.h>
>> #include <plat/pxa3xx_nand.h>
>> +#include <video/pxa168fb.h>
>>
>> extern struct pxa_device_desc pxa168_device_uart1;
>> extern struct pxa_device_desc pxa168_device_uart2;
>> @@ -25,6 +26,7 @@ extern struct pxa_device_desc pxa168_device_ssp3;
>> extern struct pxa_device_desc pxa168_device_ssp4;
>> extern struct pxa_device_desc pxa168_device_ssp5;
>> extern struct pxa_device_desc pxa168_device_nand;
>> +extern struct pxa_device_desc pxa168_device_fb;
>>
>> static inline int pxa168_add_uart(int id)
>> {
>> @@ -97,4 +99,10 @@ static inline int pxa168_add_nand(struct
>> pxa3xx_nand_platform_data *info) {
>> return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
>> }
>> +
>> +static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
>> +{
>> + return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
>> +}
>> +
>> #endif /* __ASM_MACH_PXA168_H */
>> diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
>> index 652ae66..886eadb 100644
>> --- a/arch/arm/mach-mmp/pxa168.c
>> +++ b/arch/arm/mach-mmp/pxa168.c
>> @@ -25,6 +25,7 @@
>> #include <mach/dma.h>
>> #include <mach/devices.h>
>> #include <mach/mfp.h>
>> +#include <video/pxa168fb.h>
>>
>> #include "common.h"
>> #include "clock.h"
>> @@ -79,6 +80,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
>> static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
>>
>> static APMU_CLK(nand, NAND, 0x01db, 208000000);
>> +static APMU_CLK(lcd, LCD, 0x7f, 312000000);
>>
>> /* device and clock bindings */
>> static struct clk_lookup pxa168_clkregs[] = {
>> @@ -96,6 +98,7 @@ static struct clk_lookup pxa168_clkregs[] = {
>> INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
>> INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
>> INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
>> + INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
>> };
>>
>> static int __init pxa168_init(void)
>> @@ -147,3 +150,4 @@ PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000,
>> 0x40, 54, 55); PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000,
>> 0x40, 56, 57); PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000,
>> 0x40, 58, 59); PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000,
>> 0x40, 60, 61); +PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000,
>> 0x1c8);
>> diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
>> index c91a7f7..d3e597e 100644
>> --- a/drivers/video/pxa168fb.c
>> +++ b/drivers/video/pxa168fb.c
>> @@ -559,7 +559,7 @@ static struct fb_ops pxa168fb_ops = {
>> .fb_imageblit = cfb_imageblit,
>> };
>>
>> -static int __init pxa168fb_init_mode(struct fb_info *info,
>> +static int pxa168fb_init_mode(struct fb_info *info,
>> struct pxa168fb_mach_info *mi)
>
> Why do you remove __init from it ?
>> {
>> struct pxa168fb_info *fbi = info->par;
>> @@ -599,7 +599,7 @@ static int __init pxa168fb_init_mode(struct fb_info
>> *info, return ret;
>> }
>>
>> -static int __init pxa168fb_probe(struct platform_device *pdev)
>> +static int pxa168fb_probe(struct platform_device *pdev)
>
> Why do you remove __init from it ? (DTTO)
>> {
>> struct pxa168fb_mach_info *mi;
>> struct fb_info *info = 0;
>
> Cheers
>
Hi Marek,
1) I removed the __init because it was causing a section mismatch
warning wth this kernel. Since pxa168fb_probe() is calling
pxa168fb_init_mode(), I cannot declare pxa168fb_init_mode() as an
__init function. If pxa168fb_probe gets called after the __init
section is wiped then it will attempt to run the deleted
pxa168fb_init_mode() code.
WARNING: vmlinux.o(.data+0x17984): Section mismatch in reference from
the variable pxa168fb_driver to the function
.init.text:pxa168fb_probe()
The variable pxa168fb_driver references
the function __init pxa168fb_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
2) What is the logic behind the delineation between patch files? I
cannot build patch #1 without patch #2 based on how you defined the
split. I need all of it in order to function.
-- Mark
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/