Re: [PATCH -v3] x86, tsc: Remove CPU frequency calibration on AMD

[Borislav Petkov]

From: Alok Kataria <akataria@xxxxxxxxxx>
Date: Wed, Aug 25, 2010 at 06:33:08PM -0400

> 
> On Wed, 2010-08-25 at 09:28 -0700, Borislav Petkov wrote:
> > 6b37f5a20c0e5c334c010a587058354215433e92 introduced the CPU frequency
> > calibration code for AMD CPUs whose TSCs didn't increment with the
> > core's P0 frequency. From F10h, revB onward, however, the TSC increment
> > rate is denoted by MSRC001_0015[24] and when this bit is set (which
> > should be done by the BIOS) the TSC increments with the P0 frequency
> > so the calibration is not needed and booting can be a couple of mcecs
> > faster on those machines.
> > 
> > Besides, there should be virtually no machines out there which don't
> > have this bit set, therefore this calibration can be safely removed. It
> > is a shaky hack anyway since it assumes implicitly that the core is in
> > P0 when BIOS hands off to the OS, which might not always be the case.
> 
> Nice... this works for us too, we don't muck with that MSR bit either,
> its directly passed as is from the h/w to the guest. So no additional
> changes would be needed for us with this.

That's nice, KVM appears to not hit it either due to unsynchronized
TSCs.

> Hope that the 3rd time is a charm for you too :)

Yeah, I think it is :). Sorry for taking so long but removing code which
is actively executed from the kernel is not such a light decision. But
the hw guys made sure that this bit is always set so we don't need the
calibration. It wouldn't work in all cases anyway (hint: boosted cores).

Thanks.

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/