Re: 3w-9xxx: scsi0: WARNING: (0x06:0x0037): Character ioctl (0x108)timed out, resetting card.

[Justin Piszcz]

On Fri, 27 Aug 2010, adam radford wrote:

> Justin,
>
> This just means the firmware didn't complete an ioctl in 60 seconds.
>
> Can try changing this define in 3w-9xxx.h:
>
> #define TW_IOCTL_CHRDEV_TIMEOUT               60 /* 60 seconds */
>
> to 90 or 120 seconds to see if that fixes your issue?
>
> Thanks,
>
> -Adam

Hi Adam,

Thanks for responding!

LSI just got back to me on a second case, their latest beta firmware:
http://www.lsi.com/DistributionSystem/AssetDocument/readme.txt

SCR 2196:  Unexpected controller soft resets
Fixed an issue with regards to  deferral of write and read commands to 
help eliminate unexpected soft resets.

Well well!

Plan of action:

1. See if the error recurs without 'nobarrier' - only because there are 
some threads about problems when this is enabled on 3ware controllers.

2. LSI recommended I disconnect/replace my BBU module, I already did once 
before, ~$120, so the next step I will apply their latest Beta firmware.

3. If it STILL does it, I can increase the timeout, HOWEVER, when I see 
this, I/O on the system, everything locks up for 60-120-180-360 seconds 
and then it comes back after it resets the controller.  The weird thing is 
this controller is only for a /data volume and not the root filesystem. 
The root filesystem is on a separate RAID-1 4 port card (also w/BBU).

If you google that exact error, there is very little information, if I 
find something that works, I'll update the list so others have something 
to point to when they see this problem.

Justin.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/