Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_CAN driver to 2.6.35

[Wolfgang Grandegger]

Hello,

On 09/01/2010 09:45 AM, Masayuki Ohtake wrote:
> Sorry, for late response.
> ----- Original Message ----- 
> From: "Wang, Qi" <qi.wang@xxxxxxxxx>
> To: "Masayuki Ohtak" <masa-korg@xxxxxxxxxxxxxxx>
> Cc: "Khor, Andrew Chih Howe" <andrew.chih.howe.khor@xxxxxxxxx>; <gregkh@xxxxxxx>; <arjan@xxxxxxxxxxxxxxx>; "Wang, Yong
> Y" <yong.y.wang@xxxxxxxxx>; "Wolfgang Grandegger" <wg@xxxxxxxxxxxxxx>
> Sent: Thursday, August 12, 2010 6:00 PM
> Subject: RE: [MeeGo-Dev][PATCH] Topcliff: Update PCH_CAN driver to 2.6.35
...
>>>>> - The values for the hw-specific bit-timing registers should be derived
>>>>>   from the calculated values in "priv->can.bittiming":
>>>>>
>>>>>   http://lxr.linux.no/#linux+v2.6.35/include/linux/can/netlink.h#L17
>>>>>
> 
> I show current pch_can code below.
> 
> +static int pch_set_bittiming(struct net_device *ndev)
> +{
> + struct pch_can_priv *priv = netdev_priv(ndev);
> + struct pch_can_os *dev_can_os = priv->pch_can_os_p;
> + const struct can_bittiming *bt = &priv->can.bittiming;
> 
> Is the above TRUE, isn't it ?

The code fragment looks good. In that function you should then *derive*
the values of the bit-timing registers from the data fields of "bt". For
the SJA1000, you find the code here:

http://lxr.linux.no/#linux+v2.6.35/drivers/net/can/sja1000/sja1000.c#L202

>>>>> - The driver should handle state changes and communicate them to the
>>>>>   user space via error messages, if possible.
>>>>>
> What's "state chage" mean ?

Googling for "can bis states" returned:

http://www.softing.com/home/en/industrial-automation/products/can-bus/more-can-bus/error-handling/error-states.php?navanchor=3010510

The CAN controller usually triggers an interrupt when the state changes,
which allows the driver to track the CAN state and deliver that
information to the user space.

>>>>> - The driver should report errors to the user space via error messages.
>>>>>
> Is the above mean using alloc_can_err_skb and set error info and notify to kernel with netif_rx ?

Yes. Please search "Documentation/networking/can.txt" for "error frames"
for further information.

>>>>> - Bus errors seem not to be handled properly.I'm missing can_bus_off().
>>>>>   Does the controller recover from bus-off automatically?
> No.
> CAN driver recovers from Bus-off state.

You mean: "It does *not" recover automatically"! Right?

> 
>>>>>
>>>>> - I see that the driver uses many TX and RX objects. How do you avoid
>>>>>   out-of-order transmission and reception?
>>>> What do you mean out-of-order RX and TX?
>>>> Atom processor only supports in-order execution, and PCIe-based peripherals
>>> can solve it with consumer-producer model. Actually IC designer will take care
>>> of out-of-order PCIe CPLD transaction.
>>>
>>> I mean out-of-order transmission to or from the CAN bus. This is handled
>>> by the CAN controller hardware. It has nothing to to with the processor.
> Cannot avoid occurring rx or tx our-of-order.

It is a *requirement* as Oliver already pointed out. It's easy to
achieve if just one TX object is used but it might be tricky with more
than one.

Wolfgang.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/