[Discussion] USB: musb-gadget: how to fix ZLP issue in musb_g_tx

[Ming Lei]

Hi All,

In another thread, Sergei pointed out there is a ZLP issue in musb_g_tx:

Sergei Shtylyov <sshtylyov@xxxxxxxxxx> wrote:
> Hello.
>
> On 15-09-2010 14:05, Felipe Balbi wrote:
>
> >> I didn't say it was duplicate for DMA, just too late.
>
> > how come ? we need to send ZLP before giving back the request.
>
>     Well, look at the code ionce again. We need to send ZLP *after*
> request->actual == request->length, but as the check is inserted
> after the ZLP send, ZLP *may* be sent once the first DMA completes,
> not the last.
>
> WBR, Sergei

balbi also confirmed that is is really a problem.

I also have two related questions below for the problem:

1),  why is the check for "is_dma" needed here?

      if (is_dma || request->actual == request->length) {
           ....
      }

2), why is a zlp needed in the case below?

      #ifdef CONFIG_USB_INVENTRA_DMA
                  || (is_dma && (!dma->desired_mode ||
                     (request->actual & (musb_ep->packet_sz - 1))))
     #endif

Seems no request->zero is set to ask for zlp explicitly in
the case above.

IMO, it is not difficult to give a good fix for the ZLP problem
if the two questions are clear.

-- 
Lei Ming
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/