Re: [RFC PATCH] drivers/net/tg3.c: Raise Jumbo Frame MTU to 9216?

[Joe Perches]

On Wed, 2010-09-15 at 10:57 -0700, Michael Chan wrote:
> On Wed, 2010-09-15 at 10:41 -0700, Joe Perches wrote:
> > The TG3 apparently supports 9K frame sizes.
> > http://www.broadcom.com/collateral/pb/5704C-PB05-R.pdf
> > Is exactly 9000 a hardware limit?
> > Should the jumbo frame MTU be raised to 9216 or 9216
> > less the size of MAC, VLAN, IP and TCP headers?
> 9000 has been the de facto standard, has it been changed recently?

I know of a performance lab that's trying to use 9216 as a "standard"
jumbo frame length.

Unrelated to the performance lab:
http://www.uoregon.edu/~joe/jumbo-clean-gear.html
9216 seems popular, especially with Cisco gear.
Contrary to that link, the Cisco 3750 does work with 9216 length
jumbo frames.

> Anyway, we've never done any testing on 9216.  As it uses up to 2 more
> internal mbufs per packet, there may not be sufficient buffers inside
> the chip for optimal operations.  At best, some water marks will need to
> be tweaked.  The hardware statistics counters (ethtool -S) also may not
> work for packets bigger than 9022 bytes.

Thanks, do you have pointers to where the tweaking needs to be done?

Is this define a hardware upper bound?
#define TG3_RX_JMB_DMA_SZ		9046

cheers, Joe

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/