Re: 2.6.35-stable/ppc64/p7: suspicious rcu_dereference_check()usage detected during 2.6.35-stable boot

[Subrata Modak]

On Thu, 2010-09-16 at 09:12 -0700, Paul E. McKenney wrote:
> On Thu, Sep 16, 2010 at 05:50:31PM +0200, Peter Zijlstra wrote:
> > On Mon, 2010-08-09 at 09:12 -0700, Paul E. McKenney wrote:
> > 
> > > > [    0.051203] CPU0: AMD QEMU Virtual CPU version 0.12.4 stepping 03
> > > > [    0.052999] lockdep: fixing up alternatives.
> > > > [    0.054105]
> > > > [    0.054106] ===================================================
> > > > [    0.054999] [ INFO: suspicious rcu_dereference_check() usage. ]
> > > > [    0.054999] ---------------------------------------------------
> > > > [    0.054999] kernel/sched.c:616 invoked rcu_dereference_check() without protection!
> > > > [    0.054999]
> > > > [    0.054999] other info that might help us debug this:
> > > > [    0.054999]
> > > > [    0.054999]
> > > > [    0.054999] rcu_scheduler_active = 1, debug_locks = 1
> > > > [    0.054999] 3 locks held by swapper/1:
> > > > [    0.054999]  #0:  (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff814be933>] cpu_up+0x42/0x6a
> > > > [    0.054999]  #1:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff810400d8>] cpu_hotplug_begin+0x2a/0x51
> > > > [    0.054999]  #2:  (&rq->lock){-.-...}, at: [<ffffffff814be2f7>] init_idle+0x2f/0x113
> > > > [    0.054999]
> > > > [    0.054999] stack backtrace:
> > > > [    0.054999] Pid: 1, comm: swapper Not tainted 2.6.35 #1
> > > > [    0.054999] Call Trace:
> > > > [    0.054999]  [<ffffffff81068054>] lockdep_rcu_dereference+0x9b/0xa3
> > > > [    0.054999]  [<ffffffff810325c3>] task_group+0x7b/0x8a
> > > > [    0.054999]  [<ffffffff810325e5>] set_task_rq+0x13/0x40
> > > > [    0.054999]  [<ffffffff814be39a>] init_idle+0xd2/0x113
> > > > [    0.054999]  [<ffffffff814be78a>] fork_idle+0xb8/0xc7
> > > > [    0.054999]  [<ffffffff81068717>] ? mark_held_locks+0x4d/0x6b
> > > > [    0.054999]  [<ffffffff814bcebd>] do_fork_idle+0x17/0x2b
> > > > [    0.054999]  [<ffffffff814bc89b>] native_cpu_up+0x1c1/0x724
> > > > [    0.054999]  [<ffffffff814bcea6>] ? do_fork_idle+0x0/0x2b
> > > > [    0.054999]  [<ffffffff814be876>] _cpu_up+0xac/0x127
> > > > [    0.054999]  [<ffffffff814be946>] cpu_up+0x55/0x6a
> > > > [    0.054999]  [<ffffffff81ab562a>] kernel_init+0xe1/0x1ff
> > > > [    0.054999]  [<ffffffff81003854>] kernel_thread_helper+0x4/0x10
> > > > [    0.054999]  [<ffffffff814c353c>] ? restore_args+0x0/0x30
> > > > [    0.054999]  [<ffffffff81ab5549>] ? kernel_init+0x0/0x1ff
> > > > [    0.054999]  [<ffffffff81003850>] ? kernel_thread_helper+0x0/0x10
> > > > [    0.056074] Booting Node   0, Processors  #1lockdep: fixing up alternatives.
> > > > [    0.130045]  #2lockdep: fixing up alternatives.
> > > > [    0.203089]  #3 Ok.
> > > > [    0.275286] Brought up 4 CPUs
> > > > [    0.276005] Total of 4 processors activated (16017.17 BogoMIPS).
> > > 
> > > This does look like a new one, thank you for reporting it!
> > > 
> > > Here is my analysis, which should at least provide some humor value to
> > > those who understand the code better than I do.  ;-)
> > > 
> > > So the corresponding rcu_dereference_check() is in
> > > task_subsys_state_check(), and is fetching the cpu_cgroup_subsys_id
> > > element of the newly created task's task->cgroups->subsys[] array.
> > > The "git grep" command finds only three uses of cpu_cgroup_subsys_id,
> > > but no definition.
> > > 
> > > Now, fork_idle() invokes copy_process(), which invokes cgroup_fork(),
> > > which sets the child process's ->cgroups pointer to that of the parent,
> > > also invoking get_css_set(), which increments the corresponding reference
> > > count, doing both operations under task_lock() protection (->alloc_lock).
> > > Because fork_idle() does not specify any of CLONE_NEWNS, CLONE_NEWUTS,
> > > CLONE_NEWIPC, CLONE_NEWPID, or CLONE_NEWNET, copy_namespaces() should
> > > not create a new namespace, and so there should be no ns_cgroup_clone().
> > > We should thus retain the parent's ->cgroups pointer.  And copy_process()
> > > installs the new task in the various lists, so that the task is externally
> > > accessible upon return.
> > > 
> > > After a non-error return from copy_process(), fork_init() invokes
> > > init_idle_pid(), which does not appear to affect the task's cgroup
> > > state.  Next fork_init() invokes init_idle(), which in turn invokes
> > > __set_task_cpu(), which invokes set_task_rq(), which calls task_group()
> > > several times, which calls task_subsys_state_check(), which calls the
> > > rcu_dereference_check() that complained above.
> > > 
> > > However, the result returns by rcu_dereference_check() is stored into
> > > the task structure:
> > > 
> > > 	p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
> > > 	p->se.parent = task_group(p)->se[cpu];
> > > 
> > > This means that the corresponding structure must have been tied down with
> > > a reference count or some such.  If such a reference has been taken, then
> > > this complaint is a false positive, and could be suppressed by putting
> > > rcu_read_lock() and rcu_read_unlock() around the call to init_idle()
> > > from fork_idle().  However, although, reference to the enclosing ->cgroups
> > > struct css_set is held, it is not clear to me that this reference applies
> > > to the structures pointed to by the ->subsys[] array, especially given
> > > that the cgroup_subsys_state structures referenced by this array have
> > > their own reference count, which does not appear to me to be acquired
> > > by this code path.
> > > 
> > > Or are the cgroup_subsys_state structures referenced by idle tasks
> > > never freed or some such?
> > 
> > I would hope so!, the idle tasks should be part of the root cgroup,
> > which is not removable.
> > 
> > The problem is that while we do in-fact hold rq->lock, the newly spawned
> > idle thread's cpu is not yet set to the correct cpu so the lockdep check
> > in task_group():
> > 
> >   lockdep_is_held(&task_rq(p)->lock)
> > 
> > will fail.
> > 
> > But of a chicken and egg problem. Setting the cpu needs to have the cpu
> > set ;-)
> 
> OK, makes sense to me.
> 
> > Ingo, why do we have rq->lock there at all? The CPU isn't up and running
> > yet, nothing should be touching it.
> 
> Acked-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
> 
> > Signed-off-by: Peter Zijlstra <a.p.zijlstra@xxxxxxxxx>

Thanks Peter for the fix.

Regards--
Subrata

> > ---
> >  kernel/sched.c |   12 ++++++++++++
> >  1 files changed, 12 insertions(+), 0 deletions(-)
> > 
> > diff --git a/kernel/sched.c b/kernel/sched.c
> > index bd8b487..6241049 100644
> > --- a/kernel/sched.c
> > +++ b/kernel/sched.c
> > @@ -5332,7 +5332,19 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu)
> >  	idle->se.exec_start = sched_clock();
> >  
> >  	cpumask_copy(&idle->cpus_allowed, cpumask_of(cpu));
> > +	/*
> > +	 * We're having a chicken and egg problem, even though we are
> > +	 * holding rq->lock, the cpu isn't yet set to this cpu so the
> > +	 * lockdep check in task_group() will fail.
> > +	 *
> > +	 * Similar case to sched_fork(). / Alternatively we could
> > +	 * use task_rq_lock() here and obtain the other rq->lock.
> > +	 *
> > +	 * Silence PROVE_RCU
> > +	 */
> > +	rcu_read_lock();
> >  	__set_task_cpu(idle, cpu);
> > +	rcu_read_unlock();
> >  
> >  	rq->curr = rq->idle = idle;
> >  #if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
> > 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/