Re: Packet time delays on multi-core systems

[Eric Dumazet]

Le jeudi 30 septembre 2010 Ã 16:23 +0400, Alexey Vlasov a Ãcrit :
> On Thu, Sep 30, 2010 at 08:33:52AM +0200, Eric Dumazet wrote:
> > Le jeudi 30 septembre 2010 ?? 10:24 +0400, Alexey Vlasov a ??crit :
> > > Here I found some dude with the same problem:
> > > http://lkml.org/lkml/2010/7/9/340
> > > 
> > 
> > In your opinion its the same problem.
> > 
> > But the description you gave is completely different.
> > 
> > You have time skew only when activating a particular iptables rule.
>  
> Well I put interrups from NIC, namely tx/rx query, to different
> processors and got normal pings by adding LOG rule.
> 
> I also found that overruns is constantly growing, I don't know if these are connected.
> RX packets:2831439546 errors:0 dropped:134726 overruns:947671733 frame:0
> TX packets:2880849825 errors:0 dropped:0 overruns:0 carrier:0
> 
> Rather strange that only one processor was involved, even in top was
> clear that ksoftirqd eats the first processor up to 100%. 
> 

OK, because only CPU0 gets interrupts of all queues.

> Here goes the typical distribution of interrups on new servers:
>            CPU0    CPU1    CPU2    CPU3 ... CPU23
> 752:         11       0       0       0 ...     0 PCI-MSI-edge eth0
> 753: 2799366721       0       0       0 ...     0 PCI-MSI-edge eth0-rx3
> 754: 2821840553       0       0       0 ...     0 PCI-MSI-edge eth0-rx2
> 755: 2786117044       0       0       0 ...     0 PCI-MSI-edge eth0-rx1
> 756: 2896099336       0       0       0 ...     0 PCI-MSI-edge eth0-rx0
> 757: 1808404680       0       0       0 ...     0 PCI-MSI-edge eth0-tx3
> 758: 1797855130       0       0       0 ...     0 PCI-MSI-edge eth0-tx2
> 759: 1807222032       0       0       0 ...     0 PCI-MSI-edge eth0-tx1
> 760: 1820309360       0       0       0 ...     0 PCI-MSI-edge eth0-tx0
> 

echo 01 >/proc/irq/*/eth0-rx0/../smp_affinity
echo 02 >/proc/irq/*/eth0-rx1/../smp_affinity
echo 04 >/proc/irq/*/eth0-rx2/../smp_affinity
echo 08 >/proc/irq/*/eth0-rx3/../smp_affinity


cat /proc/irq/*/eth0-rx0/../smp_affinity
cat /proc/irq/*/eth0-rx1/../smp_affinity
cat /proc/irq/*/eth0-rx2/../smp_affinity
cat /proc/irq/*/eth0-rx3/../smp_affinity



> On the old ones:
>            CPU0       CPU1       CPU2  ...      CPU8
> 502:  522320256  522384039  522327386  ... 522380267 PCI-MSI-edge eth0
> 

What network driver is it (newbox), was it (old box) ?

If you switch to 2.6.35, you can use RPS to dispatch packets to several
cpu, in the case interrupt affinity could not be changed (all interrupts
still handled by CPU0)



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/