[PATCH v2] b44: fix resume, request_irq after hw reset

[James Hogan]

On resume, call request_irq() after resetting the hardware rather than
before. It's a shared interrupt so the handler could be called
immediately if another device on the same irq interrupts (and will be
called immediately if CONFIG_DEBUG_SHIRQ=y), but unless the hardware is
reinitialised with b44_init_hw() the read of the interrupt status
register will hang the system.

Signed-off-by: James Hogan <james@xxxxxxxxxxxxx>
---
 drivers/net/b44.c |   19 ++++++++++++++-----
 1 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index efeffdf..f950505 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -2296,18 +2296,27 @@ static int b44_resume(struct ssb_device *sdev)
 	if (!netif_running(dev))
 		return 0;
 
+	spin_lock_irq(&bp->lock);
+	b44_init_rings(bp);
+	b44_init_hw(bp, B44_FULL_RESET);
+	spin_unlock_irq(&bp->lock);
+
+	/*
+	 * As a shared interrupt, the handler can be called immediately. To be
+	 * able to check the interrupt status the hardware must already be
+	 * powered back on (b44_init_hw).
+	 */
 	rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
 	if (rc) {
 		netdev_err(dev, "request_irq failed\n");
+		spin_lock_irq(&bp->lock);
+		b44_halt(bp);
+		b44_free_rings(bp);
+		spin_unlock_irq(&bp->lock);
 		return rc;
 	}
 
-	spin_lock_irq(&bp->lock);
-
-	b44_init_rings(bp);
-	b44_init_hw(bp, B44_FULL_RESET);
 	netif_device_attach(bp->dev);
-	spin_unlock_irq(&bp->lock);
 
 	b44_enable_ints(bp);
 	netif_wake_queue(dev);
-- 
1.7.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/