RE: [PATCH 3/9] ARM: S3C64XX: add touchscreen support for mach-real6410

[Kukjin Kim]

Darius Augulis wrote:
> 
> On Mon, Oct 18, 2010 at 4:29 PM, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote:
> > Darius Augulis wrote:
> >>
> >> Add touchscreen device support for mach-real6410
> >>
> >> Signed-off-by: Darius Augulis <augulis.darius@xxxxxxxxx>
> >> ---
> >>  arch/arm/mach-s3c64xx/Kconfig         |    2 ++
> >>  arch/arm/mach-s3c64xx/mach-real6410.c |   11 +++++++++++
> >>  2 files changed, 13 insertions(+), 0 deletions(-)
> >>
> >> diff --git a/arch/arm/mach-s3c64xx/Kconfig
b/arch/arm/mach-s3c64xx/Kconfig
> >> index e4aede1..b706b80 100644
> >> --- a/arch/arm/mach-s3c64xx/Kconfig
> >> +++ b/arch/arm/mach-s3c64xx/Kconfig
> >> @@ -107,6 +107,8 @@ config MACH_REAL6410
> >>       select S3C_DEV_FB
> >>       select S3C64XX_SETUP_FB_24BPP
> >>       select S3C_DEV_NAND
> >> +     select SAMSUNG_DEV_ADC
> >> +     select SAMSUNG_DEV_TS
> >>       help
> >>         Machine support for the CoreWind REAL6410
> >>
> >> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-
> >> s3c64xx/mach-real6410.c
> >> index 9fd943d..bad6990 100644
> >> --- a/arch/arm/mach-s3c64xx/mach-real6410.c
> >> +++ b/arch/arm/mach-s3c64xx/mach-real6410.c
> >> @@ -36,11 +36,13 @@
> >>  #include <mach/regs-srom.h>
> >>  #include <mach/s3c6410.h>
> >>
> >> +#include <plat/adc.h>
> >>  #include <plat/cpu.h>
> >>  #include <plat/devs.h>
> >>  #include <plat/fb.h>
> >>  #include <plat/nand.h>
> >>  #include <plat/regs-serial.h>
> >> +#include <plat/ts.h>
> >>
> >>  #include <video/platform_lcd.h>
> >>
> >> @@ -191,6 +193,14 @@ static struct platform_device *real6410_devices[]
> >> __initdata = {
> >>       &s3c_device_hsmmc1,
> >>       &s3c_device_fb,
> >>       &s3c_device_nand,
> >> +     &s3c_device_adc,
> >> +     &s3c_device_ts,
> >> +};
> >> +
> >> +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
> >> +     .delay                  = 10000,
> >> +     .presc                  = 49,
> >> +     .oversampling_shift     = 2,
> >>  };
> >>
> >>  static void __init real6410_map_io(void)
> >> @@ -289,6 +299,7 @@ static void __init real6410_machine_init(void)
> >>
> >>       s3c_fb_set_platdata(&real6410_lcd_pdata);
> >>       s3c_nand_set_platdata(&real6410_nand_info);
> >> +     s3c24xx_ts_set_platdata(&s3c_ts_platform);
> >>
> >>       /* configure nCS1 width to 16 bits */
> >>
> >
> > No need to add 's3c_adc_setname("s3c64xx-adc")' in mach-s3c64xx?
> 
> IMO no, because it's called from s3c6410_map_io() which is generic for
> all s3c64xx boards.
> This patch selects  SAMSUNG_DEV_ADC and this is enough.
> btw, all patches are tested and all devices work ok.
> 
Oh, yes...I mis-typed to find it...
Maybe I need sleeping, hehe ;-)

Will check to continue...your patches tomorrow morning.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/