[RFCv3 10/21] tcm: Add SPC-4 compliant Persistent Reservations (PR)

[Nicholas A. Bellinger]

From: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>

This patch adds exhaustive support for SPC-4 compliant persistent reservations for
target_core_mod/ConfigFS storage objects.  This includes all supported PROUT/PRIN Service
Actions and feature bits including SPEC_I_PORT=1 and APTPL=1

Please see the following for more information:

http://www.linux-iscsi.org/index.php/Persistent_Reservations

Signed-off-by: Nicholas A. Bellinger <nab@xxxxxxxxxxxxxxx>
---
 drivers/target/target_core_pr.c | 4243 +++++++++++++++++++++++++++++++++++++++
 drivers/target/target_core_pr.h |   67 +
 2 files changed, 4310 insertions(+), 0 deletions(-)
 create mode 100644 drivers/target/target_core_pr.c
 create mode 100644 drivers/target/target_core_pr.h

diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
new file mode 100644
index 0000000..141ce48
--- /dev/null
+++ b/drivers/target/target_core_pr.c
@@ -0,0 +1,4243 @@
+/*******************************************************************************
+ * Filename:  target_core_pr.c
+ *
+ * This file contains SPC-3 compliant persistent reservations and
+ * legacy SPC-2 reservations with compatible reservation handling (CRH=1)
+ *
+ * Copyright (c) 2009, 2010 Rising Tide Systems
+ * Copyright (c) 2009, 2010 Linux-iSCSI.org
+ *
+ * Nicholas A. Bellinger <nab@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ ******************************************************************************/
+
+#include <linux/version.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <asm/unaligned.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tmr.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_configfs.h>
+
+#include "target_core_hba.h"
+#include "target_core_pr.h"
+#include "target_core_ua.h"
+
+/*
+ * Used for Specify Initiator Ports Capable Bit (SPEC_I_PT)
+ */
+struct pr_transport_id_holder {
+	int dest_local_nexus;
+	struct t10_pr_registration *dest_pr_reg;
+	struct se_portal_group *dest_tpg;
+	struct se_node_acl *dest_node_acl;
+	struct se_dev_entry *dest_se_deve;
+	struct list_head dest_list;
+};
+
+int core_pr_dump_initiator_port(
+	struct t10_pr_registration *pr_reg,
+	char *buf,
+	u32 size)
+{
+	if (!(pr_reg->isid_present_at_reg))
+		return 0;
+
+	snprintf(buf, size, ",i,0x%s", &pr_reg->pr_reg_isid[0]);
+	return 1;
+}
+
+static void __core_scsi3_complete_pro_release(struct se_device *, struct se_node_acl *,
+			struct t10_pr_registration *, int);
+
+int core_scsi2_reservation_seq_non_holder(
+	struct se_cmd *cmd,
+	unsigned char *cdb,
+	u32 pr_reg_type)
+{
+	switch (cdb[0]) {
+	case INQUIRY:
+	case RELEASE:
+	case RELEASE_10:
+		return 0;
+	default:
+		return 1;
+	}
+
+	return 1;
+}
+
+int core_scsi2_reservation_check(struct se_cmd *cmd, u32 *pr_reg_type)
+{
+	struct se_device *dev = cmd->se_dev;
+	struct se_session *sess = cmd->se_sess;
+	int ret;
+
+	if (!(sess))
+		return 0;
+
+	spin_lock(&dev->dev_reservation_lock);
+	if (!dev->dev_reserved_node_acl || !sess) {
+		spin_unlock(&dev->dev_reservation_lock);
+		return 0;
+	}
+	if (dev->dev_reserved_node_acl != sess->se_node_acl) {
+		spin_unlock(&dev->dev_reservation_lock);
+		return -1;
+	}
+	if (!(dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID)) {
+		spin_unlock(&dev->dev_reservation_lock);
+		return 0;
+	}
+	ret = (dev->dev_res_bin_isid == sess->sess_bin_isid) ? 0 : -1;
+	spin_unlock(&dev->dev_reservation_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(core_scsi2_reservation_check);
+
+int core_scsi2_reservation_release(struct se_cmd *cmd)
+{
+	struct se_device *dev = cmd->se_dev;
+	struct se_session *sess = cmd->se_sess;
+	struct se_portal_group *tpg = sess->se_tpg;
+
+	if (!(sess) || !(tpg))
+		return 0;
+
+	spin_lock(&dev->dev_reservation_lock);
+	if (!dev->dev_reserved_node_acl || !sess) {
+		spin_unlock(&dev->dev_reservation_lock);
+		return 0;
+	}
+
+	if (dev->dev_reserved_node_acl != sess->se_node_acl) {
+		spin_unlock(&dev->dev_reservation_lock);
+		return 0;
+	}
+	dev->dev_reserved_node_acl = NULL;
+	dev->dev_flags &= ~DF_SPC2_RESERVATIONS;
+	if (dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID) {
+		dev->dev_res_bin_isid = 0;
+		dev->dev_flags &= ~DF_SPC2_RESERVATIONS_WITH_ISID;
+	}
+	printk(KERN_INFO "SCSI-2 Released reservation for %s LUN: %u ->"
+		" MAPPED LUN: %u for %s\n", TPG_TFO(tpg)->get_fabric_name(),
+		SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun,
+		sess->se_node_acl->initiatorname);
+	spin_unlock(&dev->dev_reservation_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(core_scsi2_reservation_release);
+
+int core_scsi2_reservation_reserve(struct se_cmd *cmd)
+{
+	struct se_device *dev = cmd->se_dev;
+	struct se_session *sess = cmd->se_sess;
+	struct se_portal_group *tpg = sess->se_tpg;
+
+	if ((T_TASK(cmd)->t_task_cdb[1] & 0x01) &&
+	    (T_TASK(cmd)->t_task_cdb[1] & 0x02)) {
+		printk(KERN_ERR "LongIO and Obselete Bits set, returning"
+				" ILLEGAL_REQUEST\n");
+		return PYX_TRANSPORT_ILLEGAL_REQUEST;
+	}
+	/*
+	 * This is currently the case for target_core_mod passthrough struct se_cmd
+	 * ops
+	 */
+	if (!(sess) || !(tpg))
+		return 0;
+
+	spin_lock(&dev->dev_reservation_lock);
+	if (dev->dev_reserved_node_acl &&
+	   (dev->dev_reserved_node_acl != sess->se_node_acl)) {
+		printk(KERN_ERR "SCSI-2 RESERVATION CONFLIFT for %s fabric\n",
+			TPG_TFO(tpg)->get_fabric_name());
+		printk(KERN_ERR "Original reserver LUN: %u %s\n",
+			SE_LUN(cmd)->unpacked_lun,
+			dev->dev_reserved_node_acl->initiatorname);
+		printk(KERN_ERR "Current attempt - LUN: %u -> MAPPED LUN: %u"
+			" from %s \n", SE_LUN(cmd)->unpacked_lun,
+			cmd->se_deve->mapped_lun,
+			sess->se_node_acl->initiatorname);
+		spin_unlock(&dev->dev_reservation_lock);
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+
+	dev->dev_reserved_node_acl = sess->se_node_acl;
+	dev->dev_flags |= DF_SPC2_RESERVATIONS;
+	if (sess->sess_bin_isid != 0) {
+		dev->dev_res_bin_isid = sess->sess_bin_isid;
+		dev->dev_flags |= DF_SPC2_RESERVATIONS_WITH_ISID;
+	}
+	printk(KERN_INFO "SCSI-2 Reserved %s LUN: %u -> MAPPED LUN: %u"
+		" for %s\n", TPG_TFO(tpg)->get_fabric_name(),
+		SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun,
+		sess->se_node_acl->initiatorname);
+	spin_unlock(&dev->dev_reservation_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(core_scsi2_reservation_reserve);
+
+static struct t10_pr_registration *core_scsi3_locate_pr_reg(struct se_device *,
+					struct se_node_acl *, struct se_session *);
+static void core_scsi3_put_pr_reg(struct t10_pr_registration *);
+
+/*
+ * Setup in target_core_transport.c:transport_generic_cmd_sequencer()
+ * and called via struct se_cmd->transport_emulate_cdb() in TCM processing
+ * thread context.
+ */
+int core_scsi2_emulate_crh(struct se_cmd *cmd)
+{
+	struct se_session *se_sess = cmd->se_sess;
+	struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
+	struct t10_pr_registration *pr_reg;
+	struct t10_reservation_template *pr_tmpl = &su_dev->t10_reservation;
+	unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0];
+	int crh = (T10_RES(su_dev)->res_type == SPC3_PERSISTENT_RESERVATIONS);
+	int conflict = 0;
+
+	if (!(se_sess))
+		return 0;
+
+	if (!(crh))
+		goto after_crh;
+
+	pr_reg = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl,
+			se_sess);
+	if (pr_reg) {
+		/*
+		 * From spc4r17 5.7.3 Exceptions to SPC-2 RESERVE and RELEASE
+		 * behavior
+		 *
+		 * A RESERVE(6) or RESERVE(10) command shall complete with GOOD
+		 * status, but no reservation shall be established and the
+		 * persistent reservation shall not be changed, if the command
+		 * is received from a) and b) below.
+		 *
+		 * A RELEASE(6) or RELEASE(10) command shall complete with GOOD
+		 * status, but the persistent reservation shall not be released,
+		 * if the command is received from a) and b)
+		 * 
+		 * a) An I_T nexus that is a persistent reservation holder; or
+		 * b) An I_T nexus that is registered if a registrants only or
+		 *    all registrants type persistent reservation is present.
+		 *
+		 * In all other cases, a RESERVE(6) command, RESERVE(10) command,
+		 * RELEASE(6) command, or RELEASE(10) command shall be processed
+		 * as defined in SPC-2.
+		 */
+		if (pr_reg->pr_res_holder) {
+			core_scsi3_put_pr_reg(pr_reg);
+			return 0;
+		}
+		if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) ||
+		    (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) ||
+		    (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+		    (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
+			core_scsi3_put_pr_reg(pr_reg);
+			return 0;
+		}
+		core_scsi3_put_pr_reg(pr_reg);
+		conflict = 1;
+	} else {
+		/*
+		 * Following spc2r20 5.5.1 Reservations overview:
+		 *
+		 * If a logical unit has executed a PERSISTENT RESERVE OUT
+		 * command with the REGISTER or the REGISTER AND IGNORE
+		 * EXISTING KEY service action and is still registered by any
+		 * initiator, all RESERVE commands and all RELEASE commands
+		 * regardless of initiator shall conflict and shall terminate
+		 * with a RESERVATION CONFLICT status.
+		 */
+		spin_lock(&pr_tmpl->registration_lock);	
+		conflict = (list_empty(&pr_tmpl->registration_list)) ? 0 : 1;
+		spin_unlock(&pr_tmpl->registration_lock);
+	}
+
+	if (conflict) {
+		printk(KERN_ERR "Received legacy SPC-2 RESERVE/RELEASE"
+			" while active SPC-3 registrations exist,"
+			" returning RESERVATION_CONFLICT\n");
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+
+after_crh:
+	if ((cdb[0] == RESERVE) || (cdb[0] == RESERVE_10))
+		return core_scsi2_reservation_reserve(cmd);
+	else if ((cdb[0] == RELEASE) || (cdb[0] == RELEASE_10))
+		return core_scsi2_reservation_release(cmd);
+	else
+		return PYX_TRANSPORT_INVALID_CDB_FIELD;		
+}
+
+/*
+ * Begin SPC-3/SPC-4 Persistent Reservations emulation support
+ *
+ * This function is called by those initiator ports who are *NOT*
+ * the active PR reservation holder when a reservation is present.
+ */
+static int core_scsi3_pr_seq_non_holder(
+	struct se_cmd *cmd,
+	unsigned char *cdb,
+	u32 pr_reg_type)
+{
+	struct se_dev_entry *se_deve;
+	struct se_session *se_sess = SE_SESS(cmd);
+	int other_cdb = 0, ignore_reg;
+	int registered_nexus = 0, ret = 1; /* Conflict by default */
+	int all_reg = 0, reg_only = 0; /* ALL_REG, REG_ONLY */
+	int we = 0; /* Write Exclusive */
+	int legacy = 0; /* Act like a legacy device and return
+			 * RESERVATION CONFLICT on some CDBs */
+	/*
+	 * A legacy SPC-2 reservation is being held.
+	 */
+	if (cmd->se_dev->dev_flags & DF_SPC2_RESERVATIONS)
+		return core_scsi2_reservation_seq_non_holder(cmd,
+					cdb, pr_reg_type);
+
+	se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+	/*
+	 * Determine if the registration should be ignored due to
+	 * non-matching ISIDs in core_scsi3_pr_reservation_check().
+	 */
+	ignore_reg = (pr_reg_type & 0x80000000);	
+	if (ignore_reg)
+		pr_reg_type &= ~0x80000000;
+
+	switch (pr_reg_type) {
+	case PR_TYPE_WRITE_EXCLUSIVE:
+		we = 1;
+	case PR_TYPE_EXCLUSIVE_ACCESS:
+		/*
+		 * Some commands are only allowed for the persistent reservation
+		 * holder.
+		 */
+		if ((se_deve->def_pr_registered) && !(ignore_reg))
+			registered_nexus = 1;
+		break;
+	case PR_TYPE_WRITE_EXCLUSIVE_REGONLY:
+		we = 1;
+	case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY:
+		/*
+		 * Some commands are only allowed for registered I_T Nexuses.
+		 */
+		reg_only = 1;
+		if ((se_deve->def_pr_registered) && !(ignore_reg))
+			registered_nexus = 1;
+		break;
+	case PR_TYPE_WRITE_EXCLUSIVE_ALLREG:
+		we = 1;
+	case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG:
+		/*
+		 * Each registered I_T Nexus is a reservation holder.
+		 */
+		all_reg = 1;
+		if ((se_deve->def_pr_registered) && !(ignore_reg))
+			registered_nexus = 1;
+		break;
+	default:
+		return -1;
+	}
+	/*
+	 * Referenced from spc4r17 table 45 for *NON* PR holder access
+	 */
+	switch (cdb[0]) {
+	case SECURITY_PROTOCOL_IN:
+		if (registered_nexus)
+			return 0;
+		ret = (we) ? 0 : 1;
+		break;
+	case MODE_SENSE:
+	case MODE_SENSE_10:
+	case READ_ATTRIBUTE:
+	case READ_BUFFER:
+	case RECEIVE_DIAGNOSTIC:
+		if (legacy) {
+			ret = 1;
+			break;
+		}
+		if (registered_nexus) {
+			ret = 0;
+			break;
+		}
+		ret = (we) ? 0 : 1; /* Allowed Write Exclusive */
+		break;
+	case PERSISTENT_RESERVE_OUT:
+		/*
+		 * This follows PERSISTENT_RESERVE_OUT service actions that
+		 * are allowed in the presence of various reservations.
+		 * See spc4r17, table 46
+		 */
+		switch (cdb[1] & 0x1f) {
+		case PRO_CLEAR:
+		case PRO_PREEMPT:
+		case PRO_PREEMPT_AND_ABORT:
+			ret = (registered_nexus) ? 0 : 1;
+			break;
+		case PRO_REGISTER:
+		case PRO_REGISTER_AND_IGNORE_EXISTING_KEY:
+			ret = 0;
+			break;
+		case PRO_REGISTER_AND_MOVE:
+		case PRO_RESERVE:
+			ret = 1;
+			break;
+		case PRO_RELEASE:
+			ret = (registered_nexus) ? 0 : 1;
+			break;
+		default:
+			printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service"
+				" action: 0x%02x\n", cdb[1] & 0x1f);
+			return -1;
+		}
+		break;
+	case RELEASE:
+	case RELEASE_10:
+		/* Handled by CRH=1 in core_scsi2_emulate_crh() */
+		ret = 0;
+		break;
+	case RESERVE:
+	case RESERVE_10:
+		/* Handled by CRH=1 in core_scsi2_emulate_crh() */
+		ret = 0;
+		break;
+	case TEST_UNIT_READY:
+		ret = (legacy) ? 1 : 0; /* Conflict for legacy */
+		break;
+	case MAINTENANCE_IN:
+		switch (cdb[1] & 0x1f) {
+		case MI_MANAGEMENT_PROTOCOL_IN:
+			if (registered_nexus) {
+				ret = 0;
+				break;
+			}
+			ret = (we) ? 0 : 1; /* Allowed Write Exclusive */
+			break;
+		case MI_REPORT_SUPPORTED_OPERATION_CODES:
+		case MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS:
+			if (legacy) {
+				ret = 1;
+				break;
+			}
+			if (registered_nexus) {
+				ret = 0;
+				break;
+			}
+			ret = (we) ? 0 : 1; /* Allowed Write Exclusive */
+			break;
+		case MI_REPORT_ALIASES:
+		case MI_REPORT_IDENTIFYING_INFORMATION:
+		case MI_REPORT_PRIORITY:
+		case MI_REPORT_TARGET_PGS:
+		case MI_REPORT_TIMESTAMP:
+			ret = 0; /* Allowed */
+			break;
+		default:
+			printk(KERN_ERR "Unknown MI Service Action: 0x%02x\n",
+				(cdb[1] & 0x1f));
+			return -1;
+		}
+		break;
+	case ACCESS_CONTROL_IN:
+	case ACCESS_CONTROL_OUT:
+	case INQUIRY:
+	case LOG_SENSE:
+	case READ_MEDIA_SERIAL_NUMBER:
+	case REPORT_LUNS:
+	case REQUEST_SENSE:
+		ret = 0; /*/ Allowed CDBs */
+		break;
+	default:
+		other_cdb = 1;
+		break;
+	}
+	/*
+	 * Case where the CDB is explictly allowed in the above switch
+	 * statement.
+	 */
+	if (!(ret) && !(other_cdb)) {
+#if 0
+		printk(KERN_INFO "Allowing explict CDB: 0x%02x for %s"
+			" reservation holder\n", cdb[0],
+			core_scsi3_pr_dump_type(pr_reg_type));
+#endif
+		return ret;
+	}
+	/*
+	 * Check if write exclusive initiator ports *NOT* holding the
+	 * WRITE_EXCLUSIVE_* reservation.
+	 */
+	if ((we) && !(registered_nexus)) {
+		if (cmd->data_direction == DMA_TO_DEVICE) {
+			/*
+			 * Conflict for write exclusive
+			 */
+			printk(KERN_INFO "%s Conflict for unregistered nexus"
+				" %s CDB: 0x%02x to %s reservation\n",
+				transport_dump_cmd_direction(cmd),
+				se_sess->se_node_acl->initiatorname, cdb[0],
+				core_scsi3_pr_dump_type(pr_reg_type));
+			return 1;
+		} else {
+			/*
+			 * Allow non WRITE CDBs for all Write Exclusive
+			 * PR TYPEs to pass for registered and
+			 * non-registered_nexuxes NOT holding the reservation.
+			 *
+			 * We only make noise for the unregisterd nexuses,
+			 * as we expect registered non-reservation holding
+			 * nexuses to issue CDBs.
+			 */
+#if 0
+			if (!(registered_nexus)) {
+				printk(KERN_INFO "Allowing implict CDB: 0x%02x"
+					" for %s reservation on unregistered"
+					" nexus\n", cdb[0],
+					core_scsi3_pr_dump_type(pr_reg_type));
+			}
+#endif
+			return 0;
+		}
+	} else if ((reg_only) || (all_reg)) {
+		if (registered_nexus) {
+			/*
+			 * For PR_*_REG_ONLY and PR_*_ALL_REG reservations,
+			 * allow commands from registered nexuses.
+			 */
+#if 0
+			printk(KERN_INFO "Allowing implict CDB: 0x%02x for %s"
+				" reservation\n", cdb[0],
+				core_scsi3_pr_dump_type(pr_reg_type));
+#endif
+			return 0;
+		}
+	}
+	printk(KERN_INFO "%s Conflict for %sregistered nexus %s CDB: 0x%2x"
+		" for %s reservation\n", transport_dump_cmd_direction(cmd),
+		(registered_nexus) ? "" : "un",
+		se_sess->se_node_acl->initiatorname, cdb[0],
+		core_scsi3_pr_dump_type(pr_reg_type));
+
+	return 1; /* Conflict by default */
+}
+
+static u32 core_scsi3_pr_generation(struct se_device *dev)
+{
+	struct se_subsystem_dev *su_dev = SU_DEV(dev);
+	u32 prg;
+	/*
+	 * PRGeneration field shall contain the value of a 32-bit wrapping
+	 * counter mainted by the device server.
+	 *
+	 * Note that this is done regardless of Active Persist across
+	 * Target PowerLoss (APTPL)
+	 *
+	 * See spc4r17 section 6.3.12 READ_KEYS service action
+	 */
+	spin_lock(&dev->dev_reservation_lock);
+	prg = T10_RES(su_dev)->pr_generation++;
+	spin_unlock(&dev->dev_reservation_lock);
+
+	return prg;
+}
+
+static int core_scsi3_pr_reservation_check(
+	struct se_cmd *cmd,
+	u32 *pr_reg_type)
+{
+	struct se_device *dev = cmd->se_dev;
+	struct se_session *sess = cmd->se_sess;
+	int ret;
+
+	if (!(sess))
+		return 0;
+	/*
+	 * A legacy SPC-2 reservation is being held.
+	 */
+	if (dev->dev_flags & DF_SPC2_RESERVATIONS)
+		return core_scsi2_reservation_check(cmd, pr_reg_type);
+
+	spin_lock(&dev->dev_reservation_lock);
+	if (!(dev->dev_pr_res_holder)) {
+		spin_unlock(&dev->dev_reservation_lock);
+		return 0;
+	}
+	*pr_reg_type = dev->dev_pr_res_holder->pr_res_type;
+	cmd->pr_res_key = dev->dev_pr_res_holder->pr_res_key;
+	if (dev->dev_pr_res_holder->pr_reg_nacl != sess->se_node_acl) {
+		spin_unlock(&dev->dev_reservation_lock);
+		return -1;
+	}
+	if (!(dev->dev_pr_res_holder->isid_present_at_reg)) {
+		spin_unlock(&dev->dev_reservation_lock);
+		return 0;
+	}
+	ret = (dev->dev_pr_res_holder->pr_reg_bin_isid ==
+	       sess->sess_bin_isid) ? 0 : -1;
+	/*
+	 * Use bit in *pr_reg_type to notify ISID mismatch in
+	 * core_scsi3_pr_seq_non_holder().
+	 */
+	if (ret != 0)
+		*pr_reg_type |= 0x80000000;
+	spin_unlock(&dev->dev_reservation_lock);
+
+	return ret;
+}
+
+static struct t10_pr_registration *__core_scsi3_do_alloc_registration(
+	struct se_device *dev,
+	struct se_node_acl *nacl,
+	struct se_dev_entry *deve,
+	unsigned char *isid,
+	u64 sa_res_key,
+	int all_tg_pt,
+	int aptpl)
+{
+	struct se_subsystem_dev *su_dev = SU_DEV(dev);
+	struct t10_pr_registration *pr_reg;
+
+	pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_ATOMIC);
+	if (!(pr_reg)) {
+		printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n");
+		return NULL;
+	}
+
+	pr_reg->pr_aptpl_buf = kzalloc(T10_RES(su_dev)->pr_aptpl_buf_len,
+					GFP_ATOMIC);
+	if (!(pr_reg->pr_aptpl_buf)) {
+		printk(KERN_ERR "Unable to allocate pr_reg->pr_aptpl_buf\n");
+		kmem_cache_free(t10_pr_reg_cache, pr_reg);
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&pr_reg->pr_reg_list);
+	INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list);
+	INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list);
+	INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list);
+	INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list);
+	atomic_set(&pr_reg->pr_res_holders, 0);
+	pr_reg->pr_reg_nacl = nacl;
+	pr_reg->pr_reg_deve = deve;
+	pr_reg->pr_res_mapped_lun = deve->mapped_lun;
+	pr_reg->pr_aptpl_target_lun = deve->se_lun->unpacked_lun;
+	pr_reg->pr_res_key = sa_res_key;
+	pr_reg->pr_reg_all_tg_pt = all_tg_pt;
+	pr_reg->pr_reg_aptpl = aptpl;
+	pr_reg->pr_reg_tg_pt_lun = deve->se_lun;
+	/*
+	 * If an ISID value for this SCSI Initiator Port exists,
+	 * save it to the registration now.
+	 */
+	if (isid != NULL) {
+		pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid);
+		snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid);
+		pr_reg->isid_present_at_reg = 1;
+	}
+
+	return pr_reg;
+}
+
+static int core_scsi3_lunacl_depend_item(struct se_dev_entry *);
+static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *);
+
+/*
+ * Function used for handling PR registrations for ALL_TG_PT=1 and ALL_TG_PT=0
+ * modes.
+ */
+static struct t10_pr_registration *__core_scsi3_alloc_registration(
+	struct se_device *dev,
+	struct se_node_acl *nacl,
+	struct se_dev_entry *deve,
+	unsigned char *isid,
+	u64 sa_res_key,
+	int all_tg_pt,
+	int aptpl)
+{
+	struct se_dev_entry *deve_tmp;
+	struct se_node_acl *nacl_tmp;
+	struct se_port *port, *port_tmp;
+	struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo;
+	struct t10_pr_registration *pr_reg, *pr_reg_atp, *pr_reg_tmp, *pr_reg_tmp_safe;
+	int ret;
+	/*
+	 * Create a registration for the I_T Nexus upon which the
+	 * PROUT REGISTER was received.
+	 */
+	pr_reg = __core_scsi3_do_alloc_registration(dev, nacl, deve, isid,
+			sa_res_key, all_tg_pt, aptpl);
+	if (!(pr_reg))
+		return NULL;
+	/*
+	 * Return pointer to pr_reg for ALL_TG_PT=0
+	 */
+	if (!(all_tg_pt))
+		return pr_reg;
+	/*
+	 * Create list of matching SCSI Initiator Port registrations
+	 * for ALL_TG_PT=1
+	 */
+	spin_lock(&dev->se_port_lock);
+	list_for_each_entry_safe(port, port_tmp, &dev->dev_sep_list, sep_list) {
+		atomic_inc(&port->sep_tg_pt_ref_cnt);
+		smp_mb__after_atomic_inc();
+		spin_unlock(&dev->se_port_lock);
+
+		spin_lock_bh(&port->sep_alua_lock);
+		list_for_each_entry(deve_tmp, &port->sep_alua_list,
+					alua_port_list) {
+			/*
+			 * This pointer will be NULL for demo mode MappedLUNs
+			 * that have not been make explict via a ConfigFS
+			 * MappedLUN group for the SCSI Initiator Node ACL.
+			 */
+			if (!(deve_tmp->se_lun_acl))
+				continue;
+
+			nacl_tmp = deve_tmp->se_lun_acl->se_lun_nacl;
+			/*
+			 * Skip the matching struct se_node_acl that is allocated
+			 * above..
+			 */
+			if (nacl == nacl_tmp)
+				continue;
+			/*
+			 * Only perform PR registrations for target ports on
+			 * the same fabric module as the REGISTER w/ ALL_TG_PT=1			
+			 * arrived.
+			 */
+			if (tfo != nacl_tmp->se_tpg->se_tpg_tfo)
+				continue;
+			/*
+			 * Look for a matching Initiator Node ACL in ASCII format
+			 */
+			if (strcmp(nacl->initiatorname, nacl_tmp->initiatorname))
+				continue;
+
+			atomic_inc(&deve_tmp->pr_ref_count);
+			smp_mb__after_atomic_inc();
+			spin_unlock_bh(&port->sep_alua_lock);
+			/*
+			 * Grab a configfs group dependency that is released
+			 * for the exception path at label out: below, or upon
+			 * completion of adding ALL_TG_PT=1 registrations in
+			 * __core_scsi3_add_registration()
+			 */
+			ret = core_scsi3_lunacl_depend_item(deve_tmp);
+			if (ret < 0) {
+				printk(KERN_ERR "core_scsi3_lunacl_depend"
+						"_item() failed\n");
+				atomic_dec(&port->sep_tg_pt_ref_cnt);
+				smp_mb__after_atomic_dec();
+				atomic_dec(&deve_tmp->pr_ref_count);
+				smp_mb__after_atomic_dec();
+				goto out;
+			}
+			/*
+			 * Located a matching SCSI Initiator Port on a different
+			 * port, allocate the pr_reg_atp and attach it to the
+			 * pr_reg->pr_reg_atp_list that will be processed once
+			 * the original *pr_reg is processed in
+			 * __core_scsi3_add_registration()
+			 */
+			pr_reg_atp = __core_scsi3_do_alloc_registration(dev,
+						nacl_tmp, deve_tmp, NULL,
+						sa_res_key, all_tg_pt, aptpl);
+			if (!(pr_reg_atp)) {
+				atomic_dec(&port->sep_tg_pt_ref_cnt);
+				smp_mb__after_atomic_dec();
+				atomic_dec(&deve_tmp->pr_ref_count);
+				smp_mb__after_atomic_dec();
+				core_scsi3_lunacl_undepend_item(deve_tmp);
+				goto out;
+			}
+
+			list_add_tail(&pr_reg_atp->pr_reg_atp_mem_list,
+				      &pr_reg->pr_reg_atp_list);
+			spin_lock_bh(&port->sep_alua_lock);
+		}
+		spin_unlock_bh(&port->sep_alua_lock);
+
+		spin_lock(&dev->se_port_lock);
+		atomic_dec(&port->sep_tg_pt_ref_cnt);
+		smp_mb__after_atomic_dec();
+	}
+	spin_unlock(&dev->se_port_lock);
+
+	return pr_reg;
+out:
+	list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe,
+			&pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) {
+		list_del(&pr_reg_tmp->pr_reg_atp_mem_list);
+		core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve);
+		kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp);
+	}
+	kmem_cache_free(t10_pr_reg_cache, pr_reg);
+	return NULL;
+}
+
+int core_scsi3_alloc_aptpl_registration(
+	struct t10_reservation_template *pr_tmpl,
+	u64 sa_res_key,
+	unsigned char *i_port,
+	unsigned char *isid,
+	u32 mapped_lun,
+	unsigned char *t_port,
+	u16 tpgt,
+	u32 target_lun,
+	int res_holder,
+	int all_tg_pt,
+	u8 type)
+{
+	struct t10_pr_registration *pr_reg;
+
+	if (!(i_port) || !(t_port) || !(sa_res_key)) {
+		printk(KERN_ERR "Illegal parameters for APTPL registration\n");
+		return -1;
+	}
+
+	pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_KERNEL);
+	if (!(pr_reg)) {
+		printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n");
+		return -1;
+	}
+	pr_reg->pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len, GFP_KERNEL);
+
+	INIT_LIST_HEAD(&pr_reg->pr_reg_list);
+	INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list);
+	INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list);
+	INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list);
+	INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list);
+	atomic_set(&pr_reg->pr_res_holders, 0);
+	pr_reg->pr_reg_nacl = NULL;
+	pr_reg->pr_reg_deve = NULL;
+	pr_reg->pr_res_mapped_lun = mapped_lun;
+	pr_reg->pr_aptpl_target_lun = target_lun;
+	pr_reg->pr_res_key = sa_res_key;
+	pr_reg->pr_reg_all_tg_pt = all_tg_pt;
+	pr_reg->pr_reg_aptpl = 1;
+	pr_reg->pr_reg_tg_pt_lun = NULL;
+	pr_reg->pr_res_scope = 0; /* Always LUN_SCOPE */
+	pr_reg->pr_res_type = type;
+	/*
+	 * If an ISID value had been saved in APTPL metadata for this
+	 * SCSI Initiator Port, restore it now.
+	 */
+	if (isid != NULL) {
+		pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid);
+		snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid);
+		pr_reg->isid_present_at_reg = 1;
+        }
+	/*
+	 * Copy the i_port and t_port information from caller.
+	 */
+	snprintf(pr_reg->pr_iport, PR_APTPL_MAX_IPORT_LEN, "%s", i_port);
+	snprintf(pr_reg->pr_tport, PR_APTPL_MAX_TPORT_LEN, "%s", t_port);
+	pr_reg->pr_reg_tpgt = tpgt;
+	/*
+	 * Set pr_res_holder from caller, the pr_reg who is the reservation
+	 * holder will get it's pointer set in core_scsi3_aptpl_reserve() once
+	 * the Initiator Node LUN ACL from the fabric module is created for
+	 * this registration.
+	 */
+	pr_reg->pr_res_holder = res_holder;
+
+	list_add_tail(&pr_reg->pr_reg_aptpl_list, &pr_tmpl->aptpl_reg_list);
+	printk(KERN_INFO "SPC-3 PR APTPL Successfully added registration%s from"
+			" metadata\n", (res_holder) ? "+reservation" : "");
+	return 0;
+}
+
+static void core_scsi3_aptpl_reserve(
+	struct se_device *dev,
+	struct se_portal_group *tpg,
+	struct se_node_acl *node_acl,
+	struct t10_pr_registration *pr_reg)
+{
+	char i_buf[PR_REG_ISID_ID_LEN];
+	int prf_isid;
+
+	memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+	prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+				PR_REG_ISID_ID_LEN);
+
+	spin_lock(&dev->dev_reservation_lock);
+	dev->dev_pr_res_holder = pr_reg;
+	spin_unlock(&dev->dev_reservation_lock);
+
+	printk(KERN_INFO "SPC-3 PR [%s] Service Action: APTPL RESERVE created"
+		" new reservation holder TYPE: %s ALL_TG_PT: %d\n",
+		TPG_TFO(tpg)->get_fabric_name(),
+		core_scsi3_pr_dump_type(pr_reg->pr_res_type),
+		(pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+	printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n",
+		TPG_TFO(tpg)->get_fabric_name(), node_acl->initiatorname,
+		(prf_isid) ? &i_buf[0] : "");
+}
+
+static void __core_scsi3_add_registration(struct se_device *, struct se_node_acl *,
+				struct t10_pr_registration *, int, int);
+
+static int __core_scsi3_check_aptpl_registration(
+	struct se_device *dev,
+	struct se_portal_group *tpg,
+	struct se_lun *lun,
+	u32 target_lun,
+	struct se_node_acl *nacl,
+	struct se_dev_entry *deve)
+{
+	struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	unsigned char i_port[PR_APTPL_MAX_IPORT_LEN];
+	unsigned char t_port[PR_APTPL_MAX_TPORT_LEN];
+	u16 tpgt;
+
+	memset(i_port, 0, PR_APTPL_MAX_IPORT_LEN);
+	memset(t_port, 0, PR_APTPL_MAX_TPORT_LEN);
+	/*
+	 * Copy Initiator Port information from struct se_node_acl
+	 */
+	snprintf(i_port, PR_APTPL_MAX_IPORT_LEN, "%s", nacl->initiatorname);
+	snprintf(t_port, PR_APTPL_MAX_TPORT_LEN, "%s",
+			TPG_TFO(tpg)->tpg_get_wwn(tpg));
+	tpgt = TPG_TFO(tpg)->tpg_get_tag(tpg);
+	/*
+	 * Look for the matching registrations+reservation from those
+	 * created from APTPL metadata.  Note that multiple registrations
+	 * may exist for fabrics that use ISIDs in their SCSI Initiator Port
+	 * TransportIDs.
+	 */
+	spin_lock(&pr_tmpl->aptpl_reg_lock);
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list,
+				pr_reg_aptpl_list) {
+		if (!(strcmp(pr_reg->pr_iport, i_port)) &&
+		     (pr_reg->pr_res_mapped_lun == deve->mapped_lun) &&
+		    !(strcmp(pr_reg->pr_tport, t_port)) &&
+		     (pr_reg->pr_reg_tpgt == tpgt) &&
+		     (pr_reg->pr_aptpl_target_lun == target_lun)) {
+
+			pr_reg->pr_reg_nacl = nacl;
+			pr_reg->pr_reg_deve = deve;
+			pr_reg->pr_reg_tg_pt_lun = lun;
+
+			list_del(&pr_reg->pr_reg_aptpl_list);
+			spin_unlock(&pr_tmpl->aptpl_reg_lock);
+			/*
+			 * At this point all of the pointers in *pr_reg will
+			 * be setup, so go ahead and add the registration.
+			 */
+
+			__core_scsi3_add_registration(dev, nacl, pr_reg, 0, 0);
+			/*
+			 * If this registration is the reservation holder,
+			 * make that happen now..
+			 */
+			if (pr_reg->pr_res_holder)
+				core_scsi3_aptpl_reserve(dev, tpg,
+						nacl, pr_reg);
+			/*
+			 * Reenable pr_aptpl_active to accept new metadata
+			 * updates once the SCSI device is active again..
+			 */
+			spin_lock(&pr_tmpl->aptpl_reg_lock);
+			pr_tmpl->pr_aptpl_active = 1;
+		}
+	}
+	spin_unlock(&pr_tmpl->aptpl_reg_lock);
+
+	return 0;
+}
+
+int core_scsi3_check_aptpl_registration(
+	struct se_device *dev,
+	struct se_portal_group *tpg,
+	struct se_lun *lun,
+	struct se_lun_acl *lun_acl)
+{
+	struct se_subsystem_dev *su_dev = SU_DEV(dev);
+	struct se_node_acl *nacl = lun_acl->se_lun_nacl;
+	struct se_dev_entry *deve = &nacl->device_list[lun_acl->mapped_lun];
+
+	if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS)
+		return 0;
+
+	return __core_scsi3_check_aptpl_registration(dev, tpg, lun,
+				lun->unpacked_lun, nacl, deve);
+}
+
+static void __core_scsi3_dump_registration(
+	struct target_core_fabric_ops *tfo,
+	struct se_device *dev,
+	struct se_node_acl *nacl,
+	struct t10_pr_registration *pr_reg,
+	int register_type)
+{
+	struct se_portal_group *se_tpg = nacl->se_tpg;
+	char i_buf[PR_REG_ISID_ID_LEN];
+	int prf_isid;
+
+	memset(&i_buf[0], 0, PR_REG_ISID_ID_LEN);
+	prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+				PR_REG_ISID_ID_LEN);
+
+	printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER%s Initiator"
+		" Node: %s%s\n", tfo->get_fabric_name(), (register_type == 2) ?
+		"_AND_MOVE" : (register_type == 1) ?
+		"_AND_IGNORE_EXISTING_KEY" : "", nacl->initiatorname,
+		(prf_isid) ? i_buf : "");
+	printk(KERN_INFO "SPC-3 PR [%s] registration on Target Port: %s,0x%04x\n",
+		 tfo->get_fabric_name(), tfo->tpg_get_wwn(se_tpg),
+		tfo->tpg_get_tag(se_tpg));
+	printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target"
+		" Port(s)\n",  tfo->get_fabric_name(),
+		(pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE",
+		TRANSPORT(dev)->name);
+	printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:"
+		" 0x%08x  APTPL: %d\n", tfo->get_fabric_name(),
+		pr_reg->pr_res_key, pr_reg->pr_res_generation,
+		pr_reg->pr_reg_aptpl);
+}
+
+/*
+ * this function can be called with struct se_device->dev_reservation_lock
+ * when register_move = 1
+ */
+static void __core_scsi3_add_registration(
+	struct se_device *dev,
+	struct se_node_acl *nacl,
+	struct t10_pr_registration *pr_reg,
+	int register_type,
+	int register_move)
+{
+	struct se_subsystem_dev *su_dev = SU_DEV(dev);
+	struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo;
+	struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe;
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+
+	/*
+	 * Increment PRgeneration counter for struct se_device upon a successful
+	 * REGISTER, see spc4r17 section 6.3.2 READ_KEYS service action
+	 *
+	 * Also, when register_move = 1 for PROUT REGISTER_AND_MOVE service
+	 * action, the struct se_device->dev_reservation_lock will already be held,
+	 * so we do not call core_scsi3_pr_generation() which grabs the lock
+	 * for the REGISTER.
+	 */
+	pr_reg->pr_res_generation = (register_move) ?
+			T10_RES(su_dev)->pr_generation++ :
+			core_scsi3_pr_generation(dev);
+
+	spin_lock(&pr_tmpl->registration_lock);
+	list_add_tail(&pr_reg->pr_reg_list, &pr_tmpl->registration_list);
+	pr_reg->pr_reg_deve->def_pr_registered = 1;
+
+	__core_scsi3_dump_registration(tfo, dev, nacl, pr_reg, register_type);
+	spin_unlock(&pr_tmpl->registration_lock);
+	/*
+	 * Skip extra processing for ALL_TG_PT=0 or REGISTER_AND_MOVE.
+	 */
+	if (!(pr_reg->pr_reg_all_tg_pt) || (register_move))
+		return;
+	/*
+	 * Walk pr_reg->pr_reg_atp_list and add registrations for ALL_TG_PT=1
+	 * allocated in __core_scsi3_alloc_registration()
+	 */
+	list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe,
+			&pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) {
+		list_del(&pr_reg_tmp->pr_reg_atp_mem_list);
+
+		pr_reg_tmp->pr_res_generation = core_scsi3_pr_generation(dev);
+
+		spin_lock(&pr_tmpl->registration_lock);
+		list_add_tail(&pr_reg_tmp->pr_reg_list,
+			      &pr_tmpl->registration_list);
+		pr_reg_tmp->pr_reg_deve->def_pr_registered = 1;
+
+		__core_scsi3_dump_registration(tfo, dev,
+				pr_reg_tmp->pr_reg_nacl, pr_reg_tmp,
+				register_type);
+		spin_unlock(&pr_tmpl->registration_lock);
+		/*
+		 * Drop configfs group dependency reference from
+		 * __core_scsi3_alloc_registration()
+		 */
+		core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve);
+	}
+}
+
+static int core_scsi3_alloc_registration(
+	struct se_device *dev,
+	struct se_node_acl *nacl,
+	struct se_dev_entry *deve,
+	unsigned char *isid,
+	u64 sa_res_key,
+	int all_tg_pt,
+	int aptpl,
+	int register_type,
+	int register_move)
+{
+	struct t10_pr_registration *pr_reg;
+
+	pr_reg = __core_scsi3_alloc_registration(dev, nacl, deve, isid,
+			sa_res_key, all_tg_pt, aptpl);
+	if (!(pr_reg))
+		return -1;
+
+	__core_scsi3_add_registration(dev, nacl, pr_reg,
+			register_type, register_move);
+	return 0;
+}
+
+static struct t10_pr_registration *__core_scsi3_locate_pr_reg(
+	struct se_device *dev,
+	struct se_node_acl *nacl,
+	unsigned char *isid)
+{
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+	struct se_portal_group *tpg;
+
+	spin_lock(&pr_tmpl->registration_lock);
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+			&pr_tmpl->registration_list, pr_reg_list) {
+		/*
+		 * First look for a matching struct se_node_acl
+		 */
+		if (pr_reg->pr_reg_nacl != nacl)
+			continue;
+
+		tpg = pr_reg->pr_reg_nacl->se_tpg;
+		/*
+		 * If this registration does NOT contain a fabric provided
+		 * ISID, then we have found a match.
+		 */
+		if (!(pr_reg->isid_present_at_reg)) {
+			/*
+			 * Determine if this SCSI device server requires that
+			 * SCSI Intiatior TransportID w/ ISIDs is enforced
+			 * for fabric modules (iSCSI) requiring them.
+			 */
+			if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) {
+				if (DEV_ATTRIB(dev)->enforce_pr_isids)
+					continue;
+			}
+			atomic_inc(&pr_reg->pr_res_holders);
+			smp_mb__after_atomic_inc();
+			spin_unlock(&pr_tmpl->registration_lock);
+			return pr_reg;
+		}
+		/*
+		 * If the *pr_reg contains a fabric defined ISID for multi-value
+		 * SCSI Initiator Port TransportIDs, then we expect a valid
+		 * matching ISID to be provided by the local SCSI Initiator Port.
+		 */
+		if (!(isid))
+			continue;
+		if (strcmp(isid, pr_reg->pr_reg_isid))
+			continue;
+			
+		atomic_inc(&pr_reg->pr_res_holders);
+		smp_mb__after_atomic_inc();
+		spin_unlock(&pr_tmpl->registration_lock);
+		return pr_reg;
+	}
+	spin_unlock(&pr_tmpl->registration_lock);
+
+	return NULL;
+}
+
+static struct t10_pr_registration *core_scsi3_locate_pr_reg(
+	struct se_device *dev,
+	struct se_node_acl *nacl,
+	struct se_session *sess)
+{
+	struct se_portal_group *tpg = nacl->se_tpg;
+	unsigned char buf[PR_REG_ISID_LEN], *isid_ptr = NULL;
+
+	if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) {
+		memset(&buf[0], 0, PR_REG_ISID_LEN);
+		TPG_TFO(tpg)->sess_get_initiator_sid(sess, &buf[0],
+					PR_REG_ISID_LEN);
+		isid_ptr = &buf[0];
+	}
+
+	return __core_scsi3_locate_pr_reg(dev, nacl, isid_ptr);
+}
+
+static void core_scsi3_put_pr_reg(struct t10_pr_registration *pr_reg)
+{
+	atomic_dec(&pr_reg->pr_res_holders);
+	smp_mb__after_atomic_dec();
+}
+
+static int core_scsi3_check_implict_release(
+	struct se_device *dev,
+	struct t10_pr_registration *pr_reg)
+{
+	struct se_node_acl *nacl = pr_reg->pr_reg_nacl;
+	struct t10_pr_registration *pr_res_holder;
+	int ret = 0;
+
+	spin_lock(&dev->dev_reservation_lock);
+	pr_res_holder = dev->dev_pr_res_holder;
+	if (!(pr_res_holder)) {
+		spin_unlock(&dev->dev_reservation_lock);
+		return ret;
+	}
+	if (pr_res_holder == pr_reg) {
+		/*
+		 * Perform an implict RELEASE if the registration that
+		 * is being released is holding the reservation.
+		 *
+		 * From spc4r17, section 5.7.11.1:
+		 *
+		 * e) If the I_T nexus is the persistent reservation holder
+		 *    and the persistent reservation is not an all registrants
+		 *    type, then a PERSISTENT RESERVE OUT command with REGISTER
+		 *    service action or REGISTER AND  IGNORE EXISTING KEY
+		 *    service action with the SERVICE ACTION RESERVATION KEY
+		 *    field set to zero (see 5.7.11.3).
+		 */
+		__core_scsi3_complete_pro_release(dev, nacl, pr_reg, 0);
+		ret = 1;
+		/*
+		 * For 'All Registrants' reservation types, all existing
+		 * registrations are still processed as reservation holders
+		 * in core_scsi3_pr_seq_non_holder() after the initial
+		 * reservation holder is implictly released here.
+		 */
+	} else if (pr_reg->pr_reg_all_tg_pt &&
+		  (!strcmp(pr_res_holder->pr_reg_nacl->initiatorname,
+			  pr_reg->pr_reg_nacl->initiatorname)) &&
+		  (pr_res_holder->pr_res_key == pr_reg->pr_res_key)) {
+		printk(KERN_ERR "SPC-3 PR: Unable to perform ALL_TG_PT=1"
+			" UNREGISTER while existing reservation with matching"
+			" key 0x%016Lx is present from another SCSI Initiator"
+			" Port\n", pr_reg->pr_res_key);
+		ret = -1;
+	}
+	spin_unlock(&dev->dev_reservation_lock);
+
+	return ret;
+}
+
+/*
+ * Called with struct t10_reservation_template->registration_lock held.
+ */
+static void __core_scsi3_free_registration(
+	struct se_device *dev,
+	struct t10_pr_registration *pr_reg,
+	struct list_head *preempt_and_abort_list,
+	int dec_holders)
+{
+	struct target_core_fabric_ops *tfo =
+			pr_reg->pr_reg_nacl->se_tpg->se_tpg_tfo;
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	char i_buf[PR_REG_ISID_ID_LEN];
+	int prf_isid;
+
+	memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+	prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+				PR_REG_ISID_ID_LEN);
+
+	pr_reg->pr_reg_deve->def_pr_registered = 0;
+	pr_reg->pr_reg_deve->pr_res_key = 0;
+	list_del(&pr_reg->pr_reg_list);
+	/*
+	 * Caller accessing *pr_reg using core_scsi3_locate_pr_reg(),
+	 * so call core_scsi3_put_pr_reg() to decrement our reference.
+	 */
+	if (dec_holders)
+		core_scsi3_put_pr_reg(pr_reg);
+	/*
+	 * Wait until all reference from any other I_T nexuses for this
+	 * *pr_reg have been released.  Because list_del() is called above,
+	 * the last core_scsi3_put_pr_reg(pr_reg) will release this reference
+	 * count back to zero, and we release *pr_reg.
+	 */
+	while (atomic_read(&pr_reg->pr_res_holders) != 0) {
+		spin_unlock(&pr_tmpl->registration_lock);
+		printk("SPC-3 PR [%s] waiting for pr_res_holders\n",
+				tfo->get_fabric_name());
+		cpu_relax();
+		spin_lock(&pr_tmpl->registration_lock);
+	}
+
+	printk(KERN_INFO "SPC-3 PR [%s] Service Action: UNREGISTER Initiator"
+		" Node: %s%s\n", tfo->get_fabric_name(),
+		pr_reg->pr_reg_nacl->initiatorname,
+		(prf_isid) ? &i_buf[0] : "");
+	printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target"
+		" Port(s)\n", tfo->get_fabric_name(),
+		(pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE",
+		TRANSPORT(dev)->name);
+	printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:"
+		" 0x%08x\n", tfo->get_fabric_name(), pr_reg->pr_res_key,
+		pr_reg->pr_res_generation);
+
+	if (!(preempt_and_abort_list)) {
+		pr_reg->pr_reg_deve = NULL;
+		pr_reg->pr_reg_nacl = NULL;
+		kfree(pr_reg->pr_aptpl_buf);
+		kmem_cache_free(t10_pr_reg_cache, pr_reg);
+		return;
+	}
+	/*
+	 * For PREEMPT_AND_ABORT, the list of *pr_reg in preempt_and_abort_list
+	 * are released once the ABORT_TASK_SET has completed..
+	 */
+	list_add_tail(&pr_reg->pr_reg_abort_list, preempt_and_abort_list);
+}
+
+void core_scsi3_free_pr_reg_from_nacl(
+	struct se_device *dev,
+	struct se_node_acl *nacl)
+{
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder;
+	/*
+	 * If the passed se_node_acl matches the reservation holder,
+	 * release the reservation.
+	 */
+	spin_lock(&dev->dev_reservation_lock);
+	pr_res_holder = dev->dev_pr_res_holder;
+	if ((pr_res_holder != NULL) &&
+	    (pr_res_holder->pr_reg_nacl == nacl))
+		__core_scsi3_complete_pro_release(dev, nacl, pr_res_holder, 0);
+	spin_unlock(&dev->dev_reservation_lock);
+	/*
+	 * Release any registration associated with the struct se_node_acl.
+	 */
+	spin_lock(&pr_tmpl->registration_lock);
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+			&pr_tmpl->registration_list, pr_reg_list) {
+
+		if (pr_reg->pr_reg_nacl != nacl)
+			continue;
+
+		__core_scsi3_free_registration(dev, pr_reg, NULL, 0);
+	}
+	spin_unlock(&pr_tmpl->registration_lock);
+}
+
+void core_scsi3_free_all_registrations(
+	struct se_device *dev)
+{
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder;
+
+	spin_lock(&dev->dev_reservation_lock);
+	pr_res_holder = dev->dev_pr_res_holder;
+	if (pr_res_holder != NULL) {
+		struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+		__core_scsi3_complete_pro_release(dev, pr_res_nacl,
+				pr_res_holder, 0);
+	}
+	spin_unlock(&dev->dev_reservation_lock);
+
+	spin_lock(&pr_tmpl->registration_lock);
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+			&pr_tmpl->registration_list, pr_reg_list) {
+
+		__core_scsi3_free_registration(dev, pr_reg, NULL, 0);
+	}
+	spin_unlock(&pr_tmpl->registration_lock);
+
+	spin_lock(&pr_tmpl->aptpl_reg_lock);
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list,
+				pr_reg_aptpl_list) {
+		list_del(&pr_reg->pr_reg_aptpl_list);
+		kfree(pr_reg->pr_aptpl_buf);
+		kmem_cache_free(t10_pr_reg_cache, pr_reg);
+	}
+	spin_unlock(&pr_tmpl->aptpl_reg_lock);
+}
+
+static int core_scsi3_tpg_depend_item(struct se_portal_group *tpg)
+{
+	return configfs_depend_item(TPG_TFO(tpg)->tf_subsys,
+			&tpg->tpg_group.cg_item);
+}
+
+static void core_scsi3_tpg_undepend_item(struct se_portal_group *tpg)
+{
+	configfs_undepend_item(TPG_TFO(tpg)->tf_subsys,
+			&tpg->tpg_group.cg_item);
+
+	atomic_dec(&tpg->tpg_pr_ref_count);
+	smp_mb__after_atomic_dec();
+}
+
+static int core_scsi3_nodeacl_depend_item(struct se_node_acl *nacl)
+{
+	struct se_portal_group *tpg = nacl->se_tpg;
+
+	if (nacl->dynamic_node_acl)
+		return 0;
+
+	return configfs_depend_item(TPG_TFO(tpg)->tf_subsys,
+			&nacl->acl_group.cg_item);
+}
+
+static void core_scsi3_nodeacl_undepend_item(struct se_node_acl *nacl)
+{
+	struct se_portal_group *tpg = nacl->se_tpg;
+
+	if (nacl->dynamic_node_acl) {
+		atomic_dec(&nacl->acl_pr_ref_count);
+		smp_mb__after_atomic_dec();
+		return;
+	}
+
+	configfs_undepend_item(TPG_TFO(tpg)->tf_subsys,
+			&nacl->acl_group.cg_item);	
+
+	atomic_dec(&nacl->acl_pr_ref_count);
+	smp_mb__after_atomic_dec();
+}
+
+static int core_scsi3_lunacl_depend_item(struct se_dev_entry *se_deve)
+{
+	struct se_lun_acl *lun_acl = se_deve->se_lun_acl;
+	struct se_node_acl *nacl;
+	struct se_portal_group *tpg;
+	/*
+	 * For nacl->dynamic_node_acl=1
+	 */
+	if (!(lun_acl))
+		return 0;
+
+	nacl = lun_acl->se_lun_nacl;
+	tpg = nacl->se_tpg;
+
+	return configfs_depend_item(TPG_TFO(tpg)->tf_subsys,
+			&lun_acl->se_lun_group.cg_item);
+}
+
+static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *se_deve)
+{
+	struct se_lun_acl *lun_acl = se_deve->se_lun_acl;
+	struct se_node_acl *nacl;
+	struct se_portal_group *tpg;
+	/*
+	 * For nacl->dynamic_node_acl=1
+	 */
+	if (!(lun_acl)) {
+		atomic_dec(&se_deve->pr_ref_count);
+		smp_mb__after_atomic_dec();
+		return;	
+	}
+	nacl = lun_acl->se_lun_nacl;
+	tpg = nacl->se_tpg;
+
+	configfs_undepend_item(TPG_TFO(tpg)->tf_subsys,
+			&lun_acl->se_lun_group.cg_item);
+
+	atomic_dec(&se_deve->pr_ref_count);
+	smp_mb__after_atomic_dec();
+}
+
+static int core_scsi3_decode_spec_i_port(
+	struct se_cmd *cmd,
+	struct se_portal_group *tpg,
+	unsigned char *l_isid,
+	u64 sa_res_key,
+	int all_tg_pt,
+	int aptpl)
+{
+	struct se_device *dev = SE_DEV(cmd);
+	struct se_port *tmp_port;
+	struct se_portal_group *dest_tpg = NULL, *tmp_tpg;
+	struct se_session *se_sess = SE_SESS(cmd);
+	struct se_node_acl *dest_node_acl = NULL;
+	struct se_dev_entry *dest_se_deve = NULL, *local_se_deve;
+	struct t10_pr_registration *dest_pr_reg, *local_pr_reg, *pr_reg_e;
+	struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe;
+	struct list_head tid_dest_list;
+	struct pr_transport_id_holder *tidh_new, *tidh, *tidh_tmp;
+	struct target_core_fabric_ops *tmp_tf_ops;
+	unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+	unsigned char *ptr, *i_str = NULL, proto_ident, tmp_proto_ident;
+	char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN];
+	u32 tpdl, tid_len = 0;
+	int ret, dest_local_nexus, prf_isid;
+	u32 dest_rtpi = 0;
+
+	memset(dest_iport, 0, 64);
+	INIT_LIST_HEAD(&tid_dest_list);
+
+	local_se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+	/*
+	 * Allocate a struct pr_transport_id_holder and setup the
+	 * local_node_acl and local_se_deve pointers and add to
+	 * struct list_head tid_dest_list for add registration
+	 * processing in the loop of tid_dest_list below.
+	 */
+	tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), GFP_KERNEL);
+	if (!(tidh_new)) {
+		printk(KERN_ERR "Unable to allocate tidh_new\n");
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	INIT_LIST_HEAD(&tidh_new->dest_list);
+	tidh_new->dest_tpg = tpg;
+	tidh_new->dest_node_acl = se_sess->se_node_acl;
+	tidh_new->dest_se_deve = local_se_deve;
+
+	local_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd),
+				se_sess->se_node_acl, local_se_deve, l_isid,
+				sa_res_key, all_tg_pt, aptpl);
+	if (!(local_pr_reg)) {
+		kfree(tidh_new);
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	tidh_new->dest_pr_reg = local_pr_reg;
+	/*
+	 * The local I_T nexus does not hold any configfs dependances,
+	 * so we set tid_h->dest_local_nexus=1 to prevent the
+	 * configfs_undepend_item() calls in the tid_dest_list loops below.
+	 */
+	tidh_new->dest_local_nexus = 1;
+	list_add_tail(&tidh_new->dest_list, &tid_dest_list);
+	/*
+	 * For a PERSISTENT RESERVE OUT specify initiator ports payload,
+	 * first extract TransportID Parameter Data Length, and make sure
+	 * the value matches up to the SCSI expected data transfer length.
+	 */
+	tpdl = (buf[24] & 0xff) << 24;
+	tpdl |= (buf[25] & 0xff) << 16;
+	tpdl |= (buf[26] & 0xff) << 8;
+	tpdl |= buf[27] & 0xff;
+
+	if ((tpdl + 28) != cmd->data_length) {
+		printk(KERN_ERR "SPC-3 PR: Illegal tpdl: %u + 28 byte header"
+			" does not equal CDB data_length: %u\n", tpdl,
+			cmd->data_length);
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
+	}
+	/*
+	 * Start processing the received transport IDs using the
+	 * receiving I_T Nexus portal's fabric dependent methods to
+	 * obtain the SCSI Initiator Port/Device Identifiers.
+	 */
+	ptr = &buf[28];
+
+	while (tpdl > 0) {
+		proto_ident = (ptr[0] & 0x0f);
+		dest_tpg = NULL;
+
+		spin_lock(&dev->se_port_lock);
+		list_for_each_entry(tmp_port, &dev->dev_sep_list, sep_list) {
+			tmp_tpg = tmp_port->sep_tpg;
+			if (!(tmp_tpg))
+				continue;
+			tmp_tf_ops = TPG_TFO(tmp_tpg);
+			if (!(tmp_tf_ops))
+				continue;
+			if (!(tmp_tf_ops->get_fabric_proto_ident) ||
+			    !(tmp_tf_ops->tpg_parse_pr_out_transport_id))
+				continue;
+			/*
+			 * Look for the matching proto_ident provided by
+			 * the received TransportID
+			 */
+			tmp_proto_ident = tmp_tf_ops->get_fabric_proto_ident(tmp_tpg);
+			if (tmp_proto_ident != proto_ident) 
+				continue;
+			dest_rtpi = tmp_port->sep_rtpi;
+
+			i_str = tmp_tf_ops->tpg_parse_pr_out_transport_id(
+					tmp_tpg, (const char *)ptr, &tid_len,
+					&iport_ptr);
+			if (!(i_str))
+				continue;
+
+			atomic_inc(&tmp_tpg->tpg_pr_ref_count);
+			smp_mb__after_atomic_inc();
+			spin_unlock(&dev->se_port_lock);
+
+			ret = core_scsi3_tpg_depend_item(tmp_tpg);
+			if (ret != 0) {
+				printk(KERN_ERR " core_scsi3_tpg_depend_item()"
+					" for tmp_tpg\n");
+				atomic_dec(&tmp_tpg->tpg_pr_ref_count);
+				smp_mb__after_atomic_dec();
+				ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+				goto out;
+			}
+			/*
+			 * Locate the desination initiator ACL to be registered
+			 * from the decoded fabric module specific TransportID
+			 * at *i_str.
+			 */
+			spin_lock_bh(&tmp_tpg->acl_node_lock);
+			dest_node_acl = __core_tpg_get_initiator_node_acl(
+						tmp_tpg, i_str);
+			if (dest_node_acl) {
+				atomic_inc(&dest_node_acl->acl_pr_ref_count);
+				smp_mb__after_atomic_inc();
+			}
+			spin_unlock_bh(&tmp_tpg->acl_node_lock);
+
+			if (!(dest_node_acl)) {
+				core_scsi3_tpg_undepend_item(tmp_tpg);
+				spin_lock(&dev->se_port_lock);
+				continue;
+			}
+
+			ret = core_scsi3_nodeacl_depend_item(dest_node_acl);
+			if (ret != 0) {
+				printk(KERN_ERR "configfs_depend_item() failed"
+					" for dest_node_acl->acl_group\n");
+				atomic_dec(&dest_node_acl->acl_pr_ref_count);
+				smp_mb__after_atomic_dec();
+				core_scsi3_tpg_undepend_item(tmp_tpg);
+				ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+				goto out;
+			}
+
+			dest_tpg = tmp_tpg;
+			printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node:"
+				" %s Port RTPI: %hu\n",
+				TPG_TFO(dest_tpg)->get_fabric_name(),
+				dest_node_acl->initiatorname, dest_rtpi);
+
+			spin_lock(&dev->se_port_lock);
+			break;
+		}
+		spin_unlock(&dev->se_port_lock);
+		
+		if (!(dest_tpg)) {
+			printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Unable to locate"
+					" dest_tpg\n");
+			ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+			goto out;
+		}
+#if 0
+		printk("SPC-3 PR SPEC_I_PT: Got %s data_length: %u tpdl: %u"
+			" tid_len: %d for %s + %s\n",
+			TPG_TFO(dest_tpg)->get_fabric_name(), cmd->data_length,
+			tpdl, tid_len, i_str, iport_ptr);
+#endif
+		if (tid_len > tpdl) {
+			printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Illegal tid_len:"
+				" %u for Transport ID: %s\n", tid_len, ptr);
+			core_scsi3_nodeacl_undepend_item(dest_node_acl);
+			core_scsi3_tpg_undepend_item(dest_tpg);
+			ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+			goto out;
+		}
+		/*
+		 * Locate the desintation struct se_dev_entry pointer for matching
+		 * RELATIVE TARGET PORT IDENTIFIER on the receiving I_T Nexus
+		 * Target Port.
+		 */
+		dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl,
+					dest_rtpi);
+		if (!(dest_se_deve)) {
+			printk(KERN_ERR "Unable to locate %s dest_se_deve"
+				" from destination RTPI: %hu\n",
+				TPG_TFO(dest_tpg)->get_fabric_name(),
+				dest_rtpi);
+
+			core_scsi3_nodeacl_undepend_item(dest_node_acl);
+			core_scsi3_tpg_undepend_item(dest_tpg);
+			ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+			goto out;
+		}
+		
+		ret = core_scsi3_lunacl_depend_item(dest_se_deve);
+		if (ret < 0) {
+			printk(KERN_ERR "core_scsi3_lunacl_depend_item()"
+					" failed\n");
+			atomic_dec(&dest_se_deve->pr_ref_count);
+			smp_mb__after_atomic_dec();	
+			core_scsi3_nodeacl_undepend_item(dest_node_acl);
+			core_scsi3_tpg_undepend_item(dest_tpg);
+			ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+			goto out;
+		}
+#if 0
+		printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node: %s"
+			" dest_se_deve mapped_lun: %u\n",
+			TPG_TFO(dest_tpg)->get_fabric_name(),
+			dest_node_acl->initiatorname, dest_se_deve->mapped_lun);
+#endif
+		/*
+		 * Skip any TransportIDs that already have a registration for
+		 * this target port.
+		 */
+		pr_reg_e = __core_scsi3_locate_pr_reg(dev, dest_node_acl,
+					iport_ptr);
+		if (pr_reg_e) { 
+			core_scsi3_put_pr_reg(pr_reg_e);	
+			core_scsi3_lunacl_undepend_item(dest_se_deve);
+			core_scsi3_nodeacl_undepend_item(dest_node_acl);
+			core_scsi3_tpg_undepend_item(dest_tpg);
+			ptr += tid_len;
+			tpdl -= tid_len;
+			tid_len = 0;
+			continue;
+		}
+		/*
+		 * Allocate a struct pr_transport_id_holder and setup
+		 * the dest_node_acl and dest_se_deve pointers for the
+		 * loop below.
+		 */
+		tidh_new = kzalloc(sizeof(struct pr_transport_id_holder),
+				GFP_KERNEL);
+		if (!(tidh_new)) {
+			printk(KERN_ERR "Unable to allocate tidh_new\n");
+			core_scsi3_lunacl_undepend_item(dest_se_deve);
+			core_scsi3_nodeacl_undepend_item(dest_node_acl);
+			core_scsi3_tpg_undepend_item(dest_tpg);
+			ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+			goto out;
+		}
+		INIT_LIST_HEAD(&tidh_new->dest_list);
+		tidh_new->dest_tpg = dest_tpg;
+		tidh_new->dest_node_acl = dest_node_acl;
+		tidh_new->dest_se_deve = dest_se_deve;
+
+		/*
+		 * Allocate, but do NOT add the registration for the
+		 * TransportID referenced SCSI Initiator port.  This
+		 * done because of the following from spc4r17 in section
+		 * 6.14.3 wrt SPEC_I_PT:
+		 *
+		 * "If a registration fails for any initiator port (e.g., if th
+		 * logical unit does not have enough resources available to
+		 * hold the registration information), no registrations shall be
+		 * made, and the command shall be terminated with
+		 * CHECK CONDITION status."
+		 *
+		 * That means we call __core_scsi3_alloc_registration() here,
+		 * and then call __core_scsi3_add_registration() in the
+		 * 2nd loop which will never fail.
+		 */
+		dest_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd),
+				dest_node_acl, dest_se_deve, iport_ptr,
+				sa_res_key, all_tg_pt, aptpl);
+		if (!(dest_pr_reg)) {
+			core_scsi3_lunacl_undepend_item(dest_se_deve);
+			core_scsi3_nodeacl_undepend_item(dest_node_acl);
+			core_scsi3_tpg_undepend_item(dest_tpg);
+			kfree(tidh_new);
+			ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+			goto out;
+		}
+		tidh_new->dest_pr_reg = dest_pr_reg;
+		list_add_tail(&tidh_new->dest_list, &tid_dest_list);
+
+		ptr += tid_len;
+		tpdl -= tid_len;
+		tid_len = 0;
+
+	}
+	/*
+	 * Go ahead and create a registrations from tid_dest_list for the
+	 * SPEC_I_PT provided TransportID for the *tidh referenced dest_node_acl
+	 * and dest_se_deve.
+	 *
+	 * The SA Reservation Key from the PROUT is set for the
+	 * registration, and ALL_TG_PT is also passed.  ALL_TG_PT=1
+	 * means that the TransportID Initiator port will be
+	 * registered on all of the target ports in the SCSI target device
+	 * ALL_TG_PT=0 means the registration will only be for the
+	 * SCSI target port the PROUT REGISTER with SPEC_I_PT=1
+	 * was received.
+	 */
+	list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) {
+		dest_tpg = tidh->dest_tpg;
+		dest_node_acl = tidh->dest_node_acl;
+		dest_se_deve = tidh->dest_se_deve;
+		dest_pr_reg = tidh->dest_pr_reg;
+		dest_local_nexus = tidh->dest_local_nexus;
+		
+		list_del(&tidh->dest_list);
+		kfree(tidh);
+
+		memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+		prf_isid = core_pr_dump_initiator_port(dest_pr_reg, &i_buf[0],
+						PR_REG_ISID_ID_LEN);
+
+		__core_scsi3_add_registration(SE_DEV(cmd), dest_node_acl,
+					dest_pr_reg, 0, 0);
+
+		printk(KERN_INFO "SPC-3 PR [%s] SPEC_I_PT: Successfully"
+			" registered Transport ID for Node: %s%s Mapped LUN:"
+			" %u\n", TPG_TFO(dest_tpg)->get_fabric_name(),
+			dest_node_acl->initiatorname, (prf_isid) ?
+			&i_buf[0] : "", dest_se_deve->mapped_lun);
+
+		if (dest_local_nexus)
+			continue;
+
+		core_scsi3_lunacl_undepend_item(dest_se_deve);
+		core_scsi3_nodeacl_undepend_item(dest_node_acl);
+		core_scsi3_tpg_undepend_item(dest_tpg);
+	}
+
+	return 0;
+out:
+	/*
+	 * For the failure case, release everything from tid_dest_list
+	 * including *dest_pr_reg and the configfs dependances..
+	 */
+	list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) {
+		dest_tpg = tidh->dest_tpg;
+		dest_node_acl = tidh->dest_node_acl;
+		dest_se_deve = tidh->dest_se_deve;
+		dest_pr_reg = tidh->dest_pr_reg;
+		dest_local_nexus = tidh->dest_local_nexus;
+
+		list_del(&tidh->dest_list);
+		kfree(tidh);
+		/*
+		 * Release any extra ALL_TG_PT=1 registrations for
+		 * the SPEC_I_PT=1 case.
+		 */
+		list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe,
+				&dest_pr_reg->pr_reg_atp_list,
+				pr_reg_atp_mem_list) {
+			list_del(&pr_reg_tmp->pr_reg_atp_mem_list);
+			core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve);
+			kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp);
+		}
+
+		kfree(dest_pr_reg->pr_aptpl_buf);
+		kmem_cache_free(t10_pr_reg_cache, dest_pr_reg);
+
+		if (dest_local_nexus)
+			continue;
+
+		core_scsi3_lunacl_undepend_item(dest_se_deve);
+		core_scsi3_nodeacl_undepend_item(dest_node_acl);
+		core_scsi3_tpg_undepend_item(dest_tpg);
+	}
+	return ret;
+}
+
+/*
+ * Called with struct se_device->dev_reservation_lock held
+ */
+static int __core_scsi3_update_aptpl_buf(
+	struct se_device *dev,
+	unsigned char *buf,
+	u32 pr_aptpl_buf_len,
+	int clear_aptpl_metadata)
+{
+	struct se_lun *lun;
+	struct se_portal_group *tpg;
+	struct se_subsystem_dev *su_dev = SU_DEV(dev);
+	struct t10_pr_registration *pr_reg;
+	unsigned char tmp[1024], isid_buf[32];
+	ssize_t len = 0;
+	int reg_count = 0;
+
+	memset(buf, 0, pr_aptpl_buf_len);
+	/*
+	 * Called to clear metadata once APTPL has been deactivated.
+	 */
+	if (clear_aptpl_metadata) {
+		snprintf(buf, pr_aptpl_buf_len,
+				"No Registrations or Reservations\n");
+		return 0;
+	}
+	/*
+	 * Walk the registration list..
+	 */
+	spin_lock(&T10_RES(su_dev)->registration_lock);
+	list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list,
+			pr_reg_list) {
+
+		memset(tmp, 0, 1024);
+		memset(isid_buf, 0, 32);
+		tpg = pr_reg->pr_reg_nacl->se_tpg;
+		lun = pr_reg->pr_reg_tg_pt_lun;
+		/*
+		 * Write out any ISID value to APTPL metadata that was included
+		 * in the original registration.
+		 */	
+		if (pr_reg->isid_present_at_reg)
+			snprintf(isid_buf, 32, "initiator_sid=%s\n",
+					pr_reg->pr_reg_isid);
+		/*
+		 * Include special metadata if the pr_reg matches the
+		 * reservation holder.
+		 */
+		if (dev->dev_pr_res_holder == pr_reg) {
+			snprintf(tmp, 1024, "PR_REG_START: %d"
+				"\ninitiator_fabric=%s\n"
+				"initiator_node=%s\n%s"
+				"sa_res_key=%llu\n"
+				"res_holder=1\nres_type=%02x\n"
+				"res_scope=%02x\nres_all_tg_pt=%d\n"
+				"mapped_lun=%u\n", reg_count,
+				TPG_TFO(tpg)->get_fabric_name(),
+				pr_reg->pr_reg_nacl->initiatorname, isid_buf,
+				pr_reg->pr_res_key, pr_reg->pr_res_type,
+				pr_reg->pr_res_scope, pr_reg->pr_reg_all_tg_pt,
+				pr_reg->pr_res_mapped_lun);
+		} else {
+			snprintf(tmp, 1024, "PR_REG_START: %d\n"
+				"initiator_fabric=%s\ninitiator_node=%s\n%s"
+				"sa_res_key=%llu\nres_holder=0\n"
+				"res_all_tg_pt=%d\nmapped_lun=%u\n",
+				reg_count, TPG_TFO(tpg)->get_fabric_name(),
+				pr_reg->pr_reg_nacl->initiatorname, isid_buf,
+				pr_reg->pr_res_key, pr_reg->pr_reg_all_tg_pt,
+				pr_reg->pr_res_mapped_lun);
+		}
+
+		if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+			printk(KERN_ERR "Unable to update renaming"
+				" APTPL metadata\n");
+			spin_unlock(&T10_RES(su_dev)->registration_lock);
+			return -1;
+		}
+		len += sprintf(buf+len, "%s", tmp);
+
+		/*
+		 * Include information about the associated SCSI target port.
+		 */
+		snprintf(tmp, 1024, "target_fabric=%s\ntarget_node=%s\n"
+			"tpgt=%hu\nport_rtpi=%hu\ntarget_lun=%u\nPR_REG_END:"
+			" %d\n", TPG_TFO(tpg)->get_fabric_name(),
+			TPG_TFO(tpg)->tpg_get_wwn(tpg),
+			TPG_TFO(tpg)->tpg_get_tag(tpg),
+			lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count);
+
+		if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+			printk(KERN_ERR "Unable to update renaming"
+				" APTPL metadata\n");
+			spin_unlock(&T10_RES(su_dev)->registration_lock);
+			return -1;
+		}
+		len += sprintf(buf+len, "%s", tmp);
+		reg_count++;
+	}
+	spin_unlock(&T10_RES(su_dev)->registration_lock);
+
+	 if (!(reg_count))
+		len += sprintf(buf+len, "No Registrations or Reservations");
+
+	return 0;
+}
+
+static int core_scsi3_update_aptpl_buf(
+	struct se_device *dev,
+	unsigned char *buf,
+	u32 pr_aptpl_buf_len,
+	int clear_aptpl_metadata)
+{
+	int ret;
+
+	spin_lock(&dev->dev_reservation_lock);
+	ret = __core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len,
+				clear_aptpl_metadata);
+	spin_unlock(&dev->dev_reservation_lock);
+
+	return ret;
+}
+
+/*
+ * Called with struct se_device->aptpl_file_mutex held
+ */
+static int __core_scsi3_write_aptpl_to_file(
+	struct se_device *dev,
+	unsigned char *buf,
+	u32 pr_aptpl_buf_len)
+{
+	struct t10_wwn *wwn = &SU_DEV(dev)->t10_wwn;
+	struct file *file;
+	struct iovec iov[1];
+	mm_segment_t old_fs;
+	int flags = O_RDWR | O_CREAT | O_TRUNC;
+	char path[512];
+	int ret;
+
+	memset(iov, 0, sizeof(struct iovec));
+	memset(path, 0, 512);
+
+	if (strlen(&wwn->unit_serial[0]) > 512) {
+		printk(KERN_ERR "WWN value for struct se_device does not fit"
+			" into path buffer\n");
+		return -1;
+	}
+
+	snprintf(path, 512, "/var/target/pr/aptpl_%s", &wwn->unit_serial[0]);
+	file = filp_open(path, flags, 0600);
+	if (IS_ERR(file) || !file || !file->f_dentry) {
+		printk(KERN_ERR "filp_open(%s) for APTPL metadata"
+			" failed\n", path);
+		return -1;
+	}
+
+	iov[0].iov_base = &buf[0];
+	if (!(pr_aptpl_buf_len))
+		iov[0].iov_len = (strlen(&buf[0]) + 1); /* Add extra for NULL */
+	else
+		iov[0].iov_len = pr_aptpl_buf_len;
+
+	old_fs = get_fs();
+	set_fs(get_ds());
+	ret = vfs_writev(file, &iov[0], 1, &file->f_pos);
+	set_fs(old_fs);
+
+	if (ret < 0) {
+		printk("Error writing APTPL metadata file: %s\n", path);
+		filp_close(file, NULL);
+		return -1;
+	}
+	filp_close(file, NULL);
+
+	return 0;
+}
+
+static int core_scsi3_update_and_write_aptpl(
+	struct se_device *dev,
+	unsigned char *in_buf,
+	u32 in_pr_aptpl_buf_len)
+{
+	unsigned char null_buf[64], *buf;
+	u32 pr_aptpl_buf_len;
+	int ret, clear_aptpl_metadata = 0;
+	/*
+	 * Can be called with a NULL pointer from PROUT service action CLEAR
+	 */
+	if (!(in_buf)) {
+		memset(null_buf, 0, 64);
+		buf = &null_buf[0];
+		/*
+		 * This will clear the APTPL metadata to:
+		 * "No Registrations or Reservations" status
+		 */
+		pr_aptpl_buf_len = 64;
+		clear_aptpl_metadata = 1;
+	} else {
+		buf = in_buf;
+		pr_aptpl_buf_len = in_pr_aptpl_buf_len;
+	}
+
+	ret = core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len,
+				clear_aptpl_metadata);
+	if (ret != 0)
+		return -1;
+	/*
+	 * __core_scsi3_write_aptpl_to_file() will call strlen()
+	 * on the passed buf to determine pr_aptpl_buf_len.
+	 */
+	ret = __core_scsi3_write_aptpl_to_file(dev, buf, 0);
+	if (ret != 0)
+		return -1;
+
+	return ret;
+}
+
+static int core_scsi3_emulate_pro_register(
+	struct se_cmd *cmd,
+	u64 res_key,
+	u64 sa_res_key,
+	int aptpl,
+	int all_tg_pt,
+	int spec_i_pt,
+	int ignore_key)
+{
+	struct se_session *se_sess = SE_SESS(cmd);
+	struct se_device *dev = SE_DEV(cmd);
+	struct se_dev_entry *se_deve;
+	struct se_lun *se_lun = SE_LUN(cmd);
+	struct se_portal_group *se_tpg;
+	struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_reg_tmp, *pr_reg_e;
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	/* Used for APTPL metadata w/ UNREGISTER */
+	unsigned char *pr_aptpl_buf = NULL;
+	unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL;
+	int pr_holder = 0, ret = 0, type;
+
+	if (!(se_sess) || !(se_lun)) {
+		printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n");
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	se_tpg = se_sess->se_tpg;
+	se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+	
+	if (TPG_TFO(se_tpg)->sess_get_initiator_sid != NULL) {
+		memset(&isid_buf[0], 0, PR_REG_ISID_LEN);
+		TPG_TFO(se_tpg)->sess_get_initiator_sid(se_sess, &isid_buf[0],
+				PR_REG_ISID_LEN);
+		isid_ptr = &isid_buf[0];
+	}
+	/*
+	 * Follow logic from spc4r17 Section 5.7.7, Register Behaviors Table 47
+	 */
+	pr_reg_e = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess);
+	if (!(pr_reg_e)) {
+		if (res_key) {
+			printk(KERN_WARNING "SPC-3 PR: Reservation Key non-zero"
+				" for SA REGISTER, returning CONFLICT\n");
+			return PYX_TRANSPORT_RESERVATION_CONFLICT;
+		}
+		/*
+		 * Do nothing but return GOOD status.
+		 */
+		if (!(sa_res_key))
+			return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+
+		if (!(spec_i_pt)) {
+			/*
+			 * Perform the Service Action REGISTER on the Initiator
+			 * Port Endpoint that the PRO was received from on the
+			 * Logical Unit of the SCSI device server.
+			 */
+			ret = core_scsi3_alloc_registration(SE_DEV(cmd),
+					se_sess->se_node_acl, se_deve, isid_ptr,
+					sa_res_key, all_tg_pt, aptpl,
+					ignore_key, 0);
+			if (ret != 0) {
+				printk(KERN_ERR "Unable to allocate"
+					" struct t10_pr_registration\n");
+				return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+			}
+		} else {
+			/*
+			 * Register both the Initiator port that received
+			 * PROUT SA REGISTER + SPEC_I_PT=1 and extract SCSI
+			 * TransportID from Parameter list and loop through
+			 * fabric dependent parameter list while calling
+			 * logic from of core_scsi3_alloc_registration() for
+			 * each TransportID provided SCSI Initiator Port/Device
+			 */
+			ret = core_scsi3_decode_spec_i_port(cmd, se_tpg,
+					isid_ptr, sa_res_key, all_tg_pt, aptpl);
+			if (ret != 0)
+				return ret;
+		}
+		/*
+		 * Nothing left to do for the APTPL=0 case.
+		 */
+		if (!(aptpl)) {
+			pr_tmpl->pr_aptpl_active = 0;
+			core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0);
+			printk("SPC-3 PR: Set APTPL Bit Deactivated for"
+					" REGISTER\n");
+			return 0;
+		}
+		/*
+		 * Locate the newly allocated local I_T Nexus *pr_reg, and
+		 * update the APTPL metadata information using its
+		 * preallocated *pr_reg->pr_aptpl_buf.
+		 */
+		pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd),
+				se_sess->se_node_acl, se_sess);
+
+		ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+				&pr_reg->pr_aptpl_buf[0],
+				pr_tmpl->pr_aptpl_buf_len);
+		if (!(ret)) {
+			pr_tmpl->pr_aptpl_active = 1;
+			printk("SPC-3 PR: Set APTPL Bit Activated for REGISTER\n");
+		}
+
+		core_scsi3_put_pr_reg(pr_reg);
+		return ret;
+	} else {
+		/*
+		 * Locate the existing *pr_reg via struct se_node_acl pointers
+		 */
+		pr_reg = pr_reg_e;
+		type = pr_reg->pr_res_type;
+
+		if (!(ignore_key)) {
+			if (res_key != pr_reg->pr_res_key) {
+				printk(KERN_ERR "SPC-3 PR REGISTER: Received"
+					" res_key: 0x%016Lx does not match"
+					" existing SA REGISTER res_key:"
+					" 0x%016Lx\n", res_key,
+					pr_reg->pr_res_key);
+				core_scsi3_put_pr_reg(pr_reg);
+				return PYX_TRANSPORT_RESERVATION_CONFLICT;
+			}
+		}
+		if (spec_i_pt) {
+			printk(KERN_ERR "SPC-3 PR UNREGISTER: SPEC_I_PT"
+				" set while sa_res_key=0\n");
+			core_scsi3_put_pr_reg(pr_reg);
+			return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		}
+		/*
+		 * An existing ALL_TG_PT=1 registration being released
+		 * must also set ALL_TG_PT=1 in the incoming PROUT.
+		 */
+		if (pr_reg->pr_reg_all_tg_pt && !(all_tg_pt)) {
+			printk(KERN_ERR "SPC-3 PR UNREGISTER: ALL_TG_PT=1"
+				" registration exists, but ALL_TG_PT=1 bit not"
+				" present in received PROUT\n");
+			core_scsi3_put_pr_reg(pr_reg);
+			return PYX_TRANSPORT_INVALID_CDB_FIELD;	
+		}
+		/*
+		 * Allocate APTPL metadata buffer used for UNREGISTER ops
+		 */
+		if (aptpl) {
+			pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len,
+						GFP_KERNEL);
+			if (!(pr_aptpl_buf)) {
+				printk(KERN_ERR "Unable to allocate"
+					" pr_aptpl_buf\n");
+				core_scsi3_put_pr_reg(pr_reg);
+				return PYX_TRANSPORT_LU_COMM_FAILURE;
+			}
+		}
+		/*
+		 * sa_res_key=0 Unregister Reservation Key for registered I_T
+		 * Nexus sa_res_key=1 Change Reservation Key for registered I_T
+		 * Nexus.
+		 */
+		if (!(sa_res_key)) {
+			pr_holder = core_scsi3_check_implict_release(
+					SE_DEV(cmd), pr_reg);
+			if (pr_holder < 0) {
+				kfree(pr_aptpl_buf);
+				core_scsi3_put_pr_reg(pr_reg);
+				return PYX_TRANSPORT_RESERVATION_CONFLICT;
+			}
+
+			spin_lock(&pr_tmpl->registration_lock);
+			/*
+			 * Release all ALL_TG_PT=1 for the matching SCSI Initiator Port
+			 * and matching pr_res_key.
+			 */
+			if (pr_reg->pr_reg_all_tg_pt) {
+				list_for_each_entry_safe(pr_reg_p, pr_reg_tmp,
+						&pr_tmpl->registration_list,
+						pr_reg_list) {
+
+					if (!(pr_reg_p->pr_reg_all_tg_pt))
+						continue;
+
+					if (pr_reg_p->pr_res_key != res_key)
+						continue;
+
+					if (pr_reg == pr_reg_p)
+						continue;
+
+					if (strcmp(pr_reg->pr_reg_nacl->initiatorname,
+						   pr_reg_p->pr_reg_nacl->initiatorname))
+						continue;
+
+					__core_scsi3_free_registration(dev,
+							pr_reg_p, NULL, 0);
+				}
+			}
+			/*
+			 * Release the calling I_T Nexus registration now..
+			 */
+			__core_scsi3_free_registration(SE_DEV(cmd), pr_reg,
+							NULL, 1);
+			/*
+			 * From spc4r17, section 5.7.11.3 Unregistering
+			 *
+			 * If the persistent reservation is a registrants only
+			 * type, the device server shall establish a unit
+			 * attention condition for the initiator port associated
+			 * with every registered I_T nexus except for the I_T
+			 * nexus on which the PERSISTENT RESERVE OUT command was
+			 * received, with the additional sense code set to
+			 * RESERVATIONS RELEASED.
+			 */
+			if (pr_holder &&
+			   ((type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) ||
+			    (type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY))) {
+				list_for_each_entry(pr_reg_p,
+						&pr_tmpl->registration_list,
+						pr_reg_list) {
+
+					core_scsi3_ua_allocate(
+						pr_reg_p->pr_reg_nacl,
+						pr_reg_p->pr_res_mapped_lun,
+						0x2A,
+						ASCQ_2AH_RESERVATIONS_RELEASED);
+				}
+			}
+			spin_unlock(&pr_tmpl->registration_lock);
+
+			if (!(aptpl)) {
+				pr_tmpl->pr_aptpl_active = 0;
+				core_scsi3_update_and_write_aptpl(dev, NULL, 0);
+				printk("SPC-3 PR: Set APTPL Bit Deactivated"
+						" for UNREGISTER\n");
+				return 0;
+			}
+
+			ret = core_scsi3_update_and_write_aptpl(dev,
+					&pr_aptpl_buf[0],
+					pr_tmpl->pr_aptpl_buf_len);
+			if (!(ret)) {
+				pr_tmpl->pr_aptpl_active = 1;
+				printk("SPC-3 PR: Set APTPL Bit Activated"
+						" for UNREGISTER\n");
+			}
+
+			kfree(pr_aptpl_buf);
+			return ret;
+		} else {
+			/*
+			 * Increment PRgeneration counter for struct se_device"
+			 * upon a successful REGISTER, see spc4r17 section 6.3.2
+			 * READ_KEYS service action.
+			 */
+			pr_reg->pr_res_generation = core_scsi3_pr_generation(
+							SE_DEV(cmd));
+			pr_reg->pr_res_key = sa_res_key;
+			printk("SPC-3 PR [%s] REGISTER%s: Changed Reservation"
+				" Key for %s to: 0x%016Lx PRgeneration:"
+				" 0x%08x\n", CMD_TFO(cmd)->get_fabric_name(),
+				(ignore_key) ? "_AND_IGNORE_EXISTING_KEY" : "",
+				pr_reg->pr_reg_nacl->initiatorname,
+				pr_reg->pr_res_key, pr_reg->pr_res_generation);
+
+			if (!(aptpl)) {
+				pr_tmpl->pr_aptpl_active = 0;
+				core_scsi3_update_and_write_aptpl(dev, NULL, 0);
+				printk("SPC-3 PR: Set APTPL Bit Deactivated"
+						" for REGISTER\n");
+				return 0;
+			}
+
+			ret = core_scsi3_update_and_write_aptpl(dev,
+					&pr_aptpl_buf[0],
+					pr_tmpl->pr_aptpl_buf_len);
+			if (!(ret)) {
+				pr_tmpl->pr_aptpl_active = 1;
+				printk("SPC-3 PR: Set APTPL Bit Activated"
+						" for REGISTER\n");
+			}
+
+			kfree(pr_aptpl_buf);
+			core_scsi3_put_pr_reg(pr_reg);
+		}
+	}
+	return 0;
+}
+
+unsigned char *core_scsi3_pr_dump_type(int type)
+{
+	switch (type) {
+	case PR_TYPE_WRITE_EXCLUSIVE:
+		return "Write Exclusive Access";
+	case PR_TYPE_EXCLUSIVE_ACCESS:
+		return "Exclusive Access";
+	case PR_TYPE_WRITE_EXCLUSIVE_REGONLY:
+		return "Write Exclusive Access, Registrants Only";
+	case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY:
+		return "Exclusive Access, Registrants Only";
+	case PR_TYPE_WRITE_EXCLUSIVE_ALLREG:
+		return "Write Exclusive Access, All Registrants";
+	case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG:
+		return "Exclusive Access, All Registrants";
+	default:
+		break;
+	}
+
+	return "Unknown SPC-3 PR Type";
+}
+
+static int core_scsi3_pro_reserve(
+	struct se_cmd *cmd,
+	struct se_device *dev,
+	int type,
+	int scope,
+	u64 res_key)
+{
+	struct se_session *se_sess = SE_SESS(cmd);
+	struct se_dev_entry *se_deve;
+	struct se_lun *se_lun = SE_LUN(cmd);
+	struct se_portal_group *se_tpg;
+	struct t10_pr_registration *pr_reg, *pr_res_holder;
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	char i_buf[PR_REG_ISID_ID_LEN];
+	int ret, prf_isid;
+
+	memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+
+	if (!(se_sess) || !(se_lun)) {
+		printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n");
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	se_tpg = se_sess->se_tpg;
+	se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+	/*
+	 * Locate the existing *pr_reg via struct se_node_acl pointers
+	 */
+	pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl,
+				se_sess);
+	if (!(pr_reg)) {
+		printk(KERN_ERR "SPC-3 PR: Unable to locate"
+			" PR_REGISTERED *pr_reg for RESERVE\n");
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	/*
+	 * From spc4r17 Section 5.7.9: Reserving:
+	 *
+	 * An application client creates a persistent reservation by issuing
+	 * a PERSISTENT RESERVE OUT command with RESERVE service action through
+	 * a registered I_T nexus with the following parameters:
+	 *    a) RESERVATION KEY set to the value of the reservation key that is
+	 * 	 registered with the logical unit for the I_T nexus; and
+	 */
+	if (res_key != pr_reg->pr_res_key) {
+		printk(KERN_ERR "SPC-3 PR RESERVE: Received res_key: 0x%016Lx"
+			" does not match existing SA REGISTER res_key:"
+			" 0x%016Lx\n", res_key, pr_reg->pr_res_key);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+	/*
+	 * From spc4r17 Section 5.7.9: Reserving:
+	 *
+	 * From above:
+	 *  b) TYPE field and SCOPE field set to the persistent reservation
+	 *     being created.
+	 *
+	 * Only one persistent reservation is allowed at a time per logical unit
+	 * and that persistent reservation has a scope of LU_SCOPE.
+	 */
+	if (scope != PR_SCOPE_LU_SCOPE) {
+		printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	}
+	/*
+	 * See if we have an existing PR reservation holder pointer at
+	 * struct se_device->dev_pr_res_holder in the form struct t10_pr_registration
+	 * *pr_res_holder.
+	 */
+	spin_lock(&dev->dev_reservation_lock);
+	pr_res_holder = dev->dev_pr_res_holder;
+	if ((pr_res_holder)) {
+		/*
+		 * From spc4r17 Section 5.7.9: Reserving:
+		 *
+		 * If the device server receives a PERSISTENT RESERVE OUT
+		 * command from an I_T nexus other than a persistent reservation
+		 * holder (see 5.7.10) that attempts to create a persistent
+		 * reservation when a persistent reservation already exists for
+		 * the logical unit, then the command shall be completed with
+		 * RESERVATION CONFLICT status.
+		 */
+		if (pr_res_holder != pr_reg) {
+			struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+			printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from"
+				" [%s]: %s while reservation already held by"
+				" [%s]: %s, returning RESERVATION_CONFLICT\n",
+				CMD_TFO(cmd)->get_fabric_name(),
+				se_sess->se_node_acl->initiatorname,
+				TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(),
+				pr_res_holder->pr_reg_nacl->initiatorname);
+
+			spin_unlock(&dev->dev_reservation_lock);
+			core_scsi3_put_pr_reg(pr_reg);
+			return PYX_TRANSPORT_RESERVATION_CONFLICT;
+		}
+		/*
+		 * From spc4r17 Section 5.7.9: Reserving:
+		 *
+		 * If a persistent reservation holder attempts to modify the
+		 * type or scope of an existing persistent reservation, the
+		 * command shall be completed with RESERVATION CONFLICT status.
+		 */
+		if ((pr_res_holder->pr_res_type != type) ||
+		    (pr_res_holder->pr_res_scope != scope)) {
+			struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+			printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from"
+				" [%s]: %s trying to change TYPE and/or SCOPE,"
+				" while reservation already held by [%s]: %s,"
+				" returning RESERVATION_CONFLICT\n",
+				CMD_TFO(cmd)->get_fabric_name(),
+				se_sess->se_node_acl->initiatorname,
+				TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(),
+				pr_res_holder->pr_reg_nacl->initiatorname);
+
+			spin_unlock(&dev->dev_reservation_lock);
+			core_scsi3_put_pr_reg(pr_reg);
+			return PYX_TRANSPORT_RESERVATION_CONFLICT;
+		}
+		/*
+		 * From spc4r17 Section 5.7.9: Reserving:
+		 *
+		 * If the device server receives a PERSISTENT RESERVE OUT
+		 * command with RESERVE service action where the TYPE field and
+		 * the SCOPE field contain the same values as the existing type
+		 * and scope from a persistent reservation holder, it shall not
+		 * make any change to the existing persistent reservation and
+		 * shall completethe command with GOOD status.
+		 */
+		spin_unlock(&dev->dev_reservation_lock);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+	}
+	/*
+	 * Otherwise, our *pr_reg becomes the PR reservation holder for said
+	 * TYPE/SCOPE.  Also set the received scope and type in *pr_reg.
+	 */
+	pr_reg->pr_res_scope = scope;
+	pr_reg->pr_res_type = type;
+	pr_reg->pr_res_holder = 1;
+	dev->dev_pr_res_holder = pr_reg;
+	prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+				PR_REG_ISID_ID_LEN);
+
+	printk(KERN_INFO "SPC-3 PR [%s] Service Action: RESERVE created new"
+		" reservation holder TYPE: %s ALL_TG_PT: %d\n",
+		CMD_TFO(cmd)->get_fabric_name(), core_scsi3_pr_dump_type(type),
+		(pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+	printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n",
+			CMD_TFO(cmd)->get_fabric_name(),
+			se_sess->se_node_acl->initiatorname,
+			(prf_isid) ? &i_buf[0] : "");
+	spin_unlock(&dev->dev_reservation_lock);
+
+	if (pr_tmpl->pr_aptpl_active) {
+		ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+				&pr_reg->pr_aptpl_buf[0],
+				pr_tmpl->pr_aptpl_buf_len);
+		if (!(ret))
+			printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata"
+					" for RESERVE\n");
+	}
+
+	core_scsi3_put_pr_reg(pr_reg);
+	return 0;
+}
+
+static int core_scsi3_emulate_pro_reserve(
+	struct se_cmd *cmd,
+	int type,
+	int scope,
+	u64 res_key)
+{
+	struct se_device *dev = cmd->se_dev;
+	int ret = 0;
+
+	switch (type) {
+	case PR_TYPE_WRITE_EXCLUSIVE:
+	case PR_TYPE_EXCLUSIVE_ACCESS:
+	case PR_TYPE_WRITE_EXCLUSIVE_REGONLY:
+	case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY:
+	case PR_TYPE_WRITE_EXCLUSIVE_ALLREG:
+	case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG:
+		ret = core_scsi3_pro_reserve(cmd, dev, type, scope, res_key);
+		break;
+	default:
+		printk(KERN_ERR "SPC-3 PR: Unknown Service Action RESERVE Type:"
+			" 0x%02x\n", type);
+		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+	}
+
+	return ret;
+}
+
+/*
+ * Called with struct se_device->dev_reservation_lock held.
+ */
+static void __core_scsi3_complete_pro_release(
+	struct se_device *dev,
+	struct se_node_acl *se_nacl,
+	struct t10_pr_registration *pr_reg,
+	int explict)
+{
+	struct target_core_fabric_ops *tfo = se_nacl->se_tpg->se_tpg_tfo;
+	char i_buf[PR_REG_ISID_ID_LEN];
+	int prf_isid;
+	
+	memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+	prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+				PR_REG_ISID_ID_LEN);
+	/*
+	 * Go ahead and release the current PR reservation holder.
+	 */
+	dev->dev_pr_res_holder = NULL;
+
+	printk(KERN_INFO "SPC-3 PR [%s] Service Action: %s RELEASE cleared"
+		" reservation holder TYPE: %s ALL_TG_PT: %d\n",
+		tfo->get_fabric_name(), (explict) ? "explict" : "implict",
+		core_scsi3_pr_dump_type(pr_reg->pr_res_type),
+		(pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+	printk(KERN_INFO "SPC-3 PR [%s] RELEASE Node: %s%s\n",
+		tfo->get_fabric_name(), se_nacl->initiatorname,
+		(prf_isid) ? &i_buf[0] : "");
+	/*
+	 * Clear TYPE and SCOPE for the next PROUT Service Action: RESERVE
+	 */
+	pr_reg->pr_res_holder = pr_reg->pr_res_type = pr_reg->pr_res_scope = 0;
+}
+
+static int core_scsi3_emulate_pro_release(
+	struct se_cmd *cmd,
+	int type,
+	int scope,
+	u64 res_key)
+{
+	struct se_device *dev = cmd->se_dev;
+	struct se_session *se_sess = SE_SESS(cmd);
+	struct se_lun *se_lun = SE_LUN(cmd);
+	struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_res_holder;
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	int ret, all_reg = 0;
+
+	if (!(se_sess) || !(se_lun)) {
+		printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n");
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	/*
+	 * Locate the existing *pr_reg via struct se_node_acl pointers
+	 */
+	pr_reg = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess);
+	if (!(pr_reg)) {
+		printk(KERN_ERR "SPC-3 PR: Unable to locate"
+			" PR_REGISTERED *pr_reg for RELEASE\n");
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	/*
+	 * From spc4r17 Section 5.7.11.2 Releasing:
+	 *
+	 * If there is no persistent reservation or in response to a persistent
+	 * reservation release request from a registered I_T nexus that is not a
+	 * persistent reservation holder (see 5.7.10), the device server shall
+	 * do the following:
+	 *
+	 *     a) Not release the persistent reservation, if any;
+	 *     b) Not remove any registrations; and
+	 *     c) Complete the command with GOOD status.
+	 */
+	spin_lock(&dev->dev_reservation_lock);
+	pr_res_holder = dev->dev_pr_res_holder;
+	if (!(pr_res_holder)) {
+		/*
+		 * No persistent reservation, return GOOD status.
+		 */
+		spin_unlock(&dev->dev_reservation_lock);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+	}
+	if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+	    (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG))
+		all_reg = 1;
+
+	if ((all_reg == 0) && (pr_res_holder != pr_reg)) {
+		/*
+		 * Non 'All Registrants' PR Type cases..
+		 * Release request from a registered I_T nexus that is not a
+		 * persistent reservation holder. return GOOD status.
+		 */
+		spin_unlock(&dev->dev_reservation_lock);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+	}
+	/*
+	 * From spc4r17 Section 5.7.11.2 Releasing:
+	 *
+	 * Only the persistent reservation holder (see 5.7.10) is allowed to
+	 * release a persistent reservation.
+	 *
+	 * An application client releases the persistent reservation by issuing
+	 * a PERSISTENT RESERVE OUT command with RELEASE service action through
+	 * an I_T nexus that is a persistent reservation holder with the
+	 * following parameters:
+	 *
+	 *     a) RESERVATION KEY field set to the value of the reservation key
+	 *	  that is registered with the logical unit for the I_T nexus;
+	 */
+	if (res_key != pr_reg->pr_res_key) {
+		printk(KERN_ERR "SPC-3 PR RELEASE: Received res_key: 0x%016Lx"
+			" does not match existing SA REGISTER res_key:"
+			" 0x%016Lx\n", res_key, pr_reg->pr_res_key);
+		spin_unlock(&dev->dev_reservation_lock);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+	/*
+	 * From spc4r17 Section 5.7.11.2 Releasing and above:
+	 *
+	 * b) TYPE field and SCOPE field set to match the persistent
+	 *    reservation being released.
+	 */
+	if ((pr_res_holder->pr_res_type != type) ||
+	    (pr_res_holder->pr_res_scope != scope)) {
+		struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+		printk(KERN_ERR "SPC-3 PR RELEASE: Attempted to release"
+			" reservation from [%s]: %s with different TYPE "
+			"and/or SCOPE  while reservation already held by"
+			" [%s]: %s, returning RESERVATION_CONFLICT\n",
+			CMD_TFO(cmd)->get_fabric_name(),
+			se_sess->se_node_acl->initiatorname,
+			TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(),
+			pr_res_holder->pr_reg_nacl->initiatorname);
+
+		spin_unlock(&dev->dev_reservation_lock);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+	/*
+	 * In response to a persistent reservation release request from the
+	 * persistent reservation holder the device server shall perform a
+	 * release by doing the following as an uninterrupted series of actions:
+	 * a) Release the persistent reservation;
+	 * b) Not remove any registration(s);
+	 * c) If the released persistent reservation is a registrants only type
+	 * or all registrants type persistent reservation,
+	 *    the device server shall establish a unit attention condition for
+	 *    the initiator port associated with every regis-
+	 *    tered I_T nexus other than I_T nexus on which the PERSISTENT
+	 *    RESERVE OUT command with RELEASE service action was received,
+	 *    with the additional sense code set to RESERVATIONS RELEASED; and
+	 * d) If the persistent reservation is of any other type, the device
+	 *    server shall not establish a unit attention condition.
+	 */
+	__core_scsi3_complete_pro_release(dev, se_sess->se_node_acl,
+			pr_reg, 1);
+
+	spin_unlock(&dev->dev_reservation_lock);
+
+	if ((type != PR_TYPE_WRITE_EXCLUSIVE_REGONLY) &&
+	    (type != PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) &&
+	    (type != PR_TYPE_WRITE_EXCLUSIVE_ALLREG) &&
+	    (type != PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
+		/*
+		 * If no UNIT ATTENTION conditions will be established for
+		 * PR_TYPE_WRITE_EXCLUSIVE or PR_TYPE_EXCLUSIVE_ACCESS 
+		 * go ahead and check for APTPL=1 update+write below
+		 */
+		goto write_aptpl;
+	}
+
+	spin_lock(&pr_tmpl->registration_lock);
+	list_for_each_entry(pr_reg_p, &pr_tmpl->registration_list,
+			pr_reg_list) {
+		/*
+		 * Do not establish a UNIT ATTENTION condition
+		 * for the calling I_T Nexus
+		 */
+		if (pr_reg_p == pr_reg)
+			continue;
+
+		core_scsi3_ua_allocate(pr_reg_p->pr_reg_nacl,
+				pr_reg_p->pr_res_mapped_lun,
+				0x2A, ASCQ_2AH_RESERVATIONS_RELEASED);
+	}
+	spin_unlock(&pr_tmpl->registration_lock);
+
+write_aptpl:
+	if (pr_tmpl->pr_aptpl_active) {
+		ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+				&pr_reg->pr_aptpl_buf[0],
+				pr_tmpl->pr_aptpl_buf_len);
+		if (!(ret))
+			printk("SPC-3 PR: Updated APTPL metadata for RELEASE\n");
+	}
+
+	core_scsi3_put_pr_reg(pr_reg);
+	return 0;
+}
+
+static int core_scsi3_emulate_pro_clear(
+	struct se_cmd *cmd,
+	u64 res_key)
+{
+	struct se_device *dev = cmd->se_dev;
+	struct se_node_acl *pr_reg_nacl;
+	struct se_session *se_sess = SE_SESS(cmd);
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder;
+	u32 pr_res_mapped_lun = 0;
+	int calling_it_nexus = 0;
+	/*
+	 * Locate the existing *pr_reg via struct se_node_acl pointers
+	 */
+	pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd),
+			se_sess->se_node_acl, se_sess);
+	if (!(pr_reg_n)) {
+		printk(KERN_ERR "SPC-3 PR: Unable to locate"
+			" PR_REGISTERED *pr_reg for CLEAR\n");
+			return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	/*
+	 * From spc4r17 section 5.7.11.6, Clearing:
+	 *
+	 * Any application client may release the persistent reservation and
+	 * remove all registrations from a device server by issuing a
+	 * PERSISTENT RESERVE OUT command with CLEAR service action through a
+	 * registered I_T nexus with the following parameter:
+	 *
+	 *	a) RESERVATION KEY field set to the value of the reservation key
+	 * 	   that is registered with the logical unit for the I_T nexus.
+	 */
+	if (res_key != pr_reg_n->pr_res_key) {
+		printk(KERN_ERR "SPC-3 PR REGISTER: Received"
+			" res_key: 0x%016Lx does not match"
+			" existing SA REGISTER res_key:"
+			" 0x%016Lx\n", res_key, pr_reg_n->pr_res_key);
+		core_scsi3_put_pr_reg(pr_reg_n);
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+	/*
+	 * a) Release the persistent reservation, if any;
+	 */
+	spin_lock(&dev->dev_reservation_lock);
+	pr_res_holder = dev->dev_pr_res_holder;
+	if (pr_res_holder) {
+		struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
+		__core_scsi3_complete_pro_release(dev, pr_res_nacl,
+			pr_res_holder, 0);
+	}
+	spin_unlock(&dev->dev_reservation_lock);
+	/*
+	 * b) Remove all registration(s) (see spc4r17 5.7.7);
+	 */
+	spin_lock(&pr_tmpl->registration_lock);
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+			&pr_tmpl->registration_list, pr_reg_list) {
+
+		calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+		pr_reg_nacl = pr_reg->pr_reg_nacl;
+		pr_res_mapped_lun = pr_reg->pr_res_mapped_lun;
+		__core_scsi3_free_registration(dev, pr_reg, NULL,
+					calling_it_nexus);
+		/*
+		 * e) Establish a unit attention condition for the initiator
+		 *    port associated with every registered I_T nexus other
+		 *    than the I_T nexus on which the PERSISTENT RESERVE OUT
+		 *    command with CLEAR service action was received, with the
+		 *    additional sense code set to RESERVATIONS PREEMPTED.
+		 */
+		if (!(calling_it_nexus))
+			core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun,
+				0x2A, ASCQ_2AH_RESERVATIONS_PREEMPTED);
+	}
+	spin_unlock(&pr_tmpl->registration_lock);
+
+	printk(KERN_INFO "SPC-3 PR [%s] Service Action: CLEAR complete\n",
+		CMD_TFO(cmd)->get_fabric_name());
+
+	if (pr_tmpl->pr_aptpl_active) {
+		core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0);
+		printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata"
+				" for CLEAR\n");
+	}
+
+	core_scsi3_pr_generation(dev);
+	return 0;
+}
+
+/*
+ * Called with struct se_device->dev_reservation_lock held.
+ */
+static void __core_scsi3_complete_pro_preempt(
+	struct se_device *dev,
+	struct t10_pr_registration *pr_reg,
+	struct list_head *preempt_and_abort_list,
+	int type,
+	int scope,
+	int abort)
+{
+	struct se_node_acl *nacl = pr_reg->pr_reg_nacl;
+	struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo;
+	char i_buf[PR_REG_ISID_ID_LEN];
+	int prf_isid;
+
+	memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+	prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+				PR_REG_ISID_ID_LEN);
+	/*
+	 * Do an implict RELEASE of the existing reservation.
+	 */
+	if (dev->dev_pr_res_holder)
+		__core_scsi3_complete_pro_release(dev, nacl,
+				dev->dev_pr_res_holder, 0);
+
+	dev->dev_pr_res_holder = pr_reg;
+	pr_reg->pr_res_holder = 1;
+	pr_reg->pr_res_type = type;
+	pr_reg->pr_res_scope = scope;
+
+	printk(KERN_INFO "SPC-3 PR [%s] Service Action: PREEMPT%s created new"
+		" reservation holder TYPE: %s ALL_TG_PT: %d\n",
+		tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "",
+		core_scsi3_pr_dump_type(type),
+		(pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+	printk(KERN_INFO "SPC-3 PR [%s] PREEMPT%s from Node: %s%s\n",
+		tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "",
+		nacl->initiatorname, (prf_isid) ? &i_buf[0] : "");
+	/*
+	 * For PREEMPT_AND_ABORT, add the preempting reservation's
+	 * struct t10_pr_registration to the list that will be compared
+	 * against received CDBs..
+	 */
+	if (preempt_and_abort_list)
+		list_add_tail(&pr_reg->pr_reg_abort_list,
+				preempt_and_abort_list);
+}
+
+static void core_scsi3_release_preempt_and_abort(
+	struct list_head *preempt_and_abort_list,
+	struct t10_pr_registration *pr_reg_holder)
+{
+	struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list,
+				pr_reg_abort_list) {
+
+		list_del(&pr_reg->pr_reg_abort_list);
+		if (pr_reg_holder == pr_reg)
+			continue;
+		if (pr_reg->pr_res_holder) {
+			printk(KERN_WARNING "pr_reg->pr_res_holder still set\n");
+			continue;
+		}
+
+		pr_reg->pr_reg_deve = NULL;
+		pr_reg->pr_reg_nacl = NULL;
+		kfree(pr_reg->pr_aptpl_buf);
+		kmem_cache_free(t10_pr_reg_cache, pr_reg);
+	}
+}
+
+int core_scsi3_check_cdb_abort_and_preempt(
+	struct list_head *preempt_and_abort_list,
+	struct se_cmd *cmd)
+{
+	struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list,
+				pr_reg_abort_list) {
+		if (pr_reg->pr_res_key == cmd->pr_res_key)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int core_scsi3_pro_preempt(
+	struct se_cmd *cmd,
+	int type,
+	int scope,
+	u64 res_key,
+	u64 sa_res_key,
+	int abort)
+{
+	struct se_device *dev = SE_DEV(cmd);
+	struct se_dev_entry *se_deve;
+	struct se_node_acl *pr_reg_nacl;
+	struct se_session *se_sess = SE_SESS(cmd);
+	struct list_head preempt_and_abort_list;
+	struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder;
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	u32 pr_res_mapped_lun = 0;
+	int all_reg = 0, calling_it_nexus = 0, released_regs = 0;
+	int prh_type = 0, prh_scope = 0, ret;
+
+	if (!(se_sess))
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+
+	se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+	pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl,
+				se_sess);
+	if (!(pr_reg_n)) {
+		printk(KERN_ERR "SPC-3 PR: Unable to locate"
+			" PR_REGISTERED *pr_reg for PREEMPT%s\n",
+			(abort) ? "_AND_ABORT" : "");
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+	if (pr_reg_n->pr_res_key != res_key) {
+		core_scsi3_put_pr_reg(pr_reg_n);
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+	if (scope != PR_SCOPE_LU_SCOPE) {
+		printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope);
+		core_scsi3_put_pr_reg(pr_reg_n);
+		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	}
+	INIT_LIST_HEAD(&preempt_and_abort_list);
+
+	spin_lock(&dev->dev_reservation_lock);
+	pr_res_holder = dev->dev_pr_res_holder;
+	if (pr_res_holder &&
+	   ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+	    (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)))
+		all_reg = 1;
+
+	if (!(all_reg) && !(sa_res_key)) {
+		spin_unlock(&dev->dev_reservation_lock);
+		core_scsi3_put_pr_reg(pr_reg_n);
+		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	}
+	/*
+	 * From spc4r17, section 5.7.11.4.4 Removing Registrations:
+	 *
+	 * If the SERVICE ACTION RESERVATION KEY field does not identify a
+	 * persistent reservation holder or there is no persistent reservation
+	 * holder (i.e., there is no persistent reservation), then the device
+	 * server shall perform a preempt by doing the following in an
+	 * uninterrupted series of actions. (See below..)
+	 */
+	if (!(pr_res_holder) || (pr_res_holder->pr_res_key != sa_res_key)) {
+		/*
+		 * No existing or SA Reservation Key matching reservations..
+		 *
+		 * PROUT SA PREEMPT with All Registrant type reservations are
+		 * allowed to be processed without a matching SA Reservation Key
+		 */
+		spin_lock(&pr_tmpl->registration_lock);
+		list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+				&pr_tmpl->registration_list, pr_reg_list) {
+			/*
+			 * Removing of registrations in non all registrants
+			 * type reservations without a matching SA reservation
+			 * key.
+			 *
+			 * a) Remove the registrations for all I_T nexuses
+			 *    specified by the SERVICE ACTION RESERVATION KEY
+			 *    field;
+			 * b) Ignore the contents of the SCOPE and TYPE fields;
+			 * c) Process tasks as defined in 5.7.1; and
+			 * d) Establish a unit attention condition for the
+			 *    initiator port associated with every I_T nexus
+			 *    that lost its registration other than the I_T
+			 *    nexus on which the PERSISTENT RESERVE OUT command
+			 *    was received, with the additional sense code set
+			 *    to REGISTRATIONS PREEMPTED.
+			 */
+			if (!(all_reg)) {
+				if (pr_reg->pr_res_key != sa_res_key)
+					continue;
+
+				calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+				pr_reg_nacl = pr_reg->pr_reg_nacl;
+				pr_res_mapped_lun = pr_reg->pr_res_mapped_lun;
+				__core_scsi3_free_registration(dev, pr_reg,
+					(abort) ? &preempt_and_abort_list :
+						NULL, calling_it_nexus);
+				released_regs++;
+			} else {
+				/*
+				 * Case for any existing all registrants type
+				 * reservation, follow logic in spc4r17 section
+				 * 5.7.11.4 Preempting, Table 52 and Figure 7.
+				 *
+				 * For a ZERO SA Reservation key, release
+				 * all other registrations and do an implict
+				 * release of active persistent reservation.
+				 *
+				 * For a non-ZERO SA Reservation key, only
+				 * release the matching reservation key from
+				 * registrations.
+				 */
+				if ((sa_res_key) &&
+				     (pr_reg->pr_res_key != sa_res_key))
+					continue;
+
+				calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+				if (calling_it_nexus)
+					continue;
+
+				pr_reg_nacl = pr_reg->pr_reg_nacl;
+				pr_res_mapped_lun = pr_reg->pr_res_mapped_lun;
+				__core_scsi3_free_registration(dev, pr_reg,
+					(abort) ? &preempt_and_abort_list :
+						NULL, 0);
+				released_regs++;
+			}
+			if (!(calling_it_nexus))
+				core_scsi3_ua_allocate(pr_reg_nacl,
+					pr_res_mapped_lun, 0x2A,
+					ASCQ_2AH_RESERVATIONS_PREEMPTED);
+		}
+		spin_unlock(&pr_tmpl->registration_lock);
+		/*
+		 * If a PERSISTENT RESERVE OUT with a PREEMPT service action or
+		 * a PREEMPT AND ABORT service action sets the SERVICE ACTION
+		 * RESERVATION KEY field to a value that does not match any
+		 * registered reservation key, then the device server shall
+		 * complete the command with RESERVATION CONFLICT status.
+		 */
+		if (!(released_regs)) {
+			spin_unlock(&dev->dev_reservation_lock);
+			core_scsi3_put_pr_reg(pr_reg_n);
+			return PYX_TRANSPORT_RESERVATION_CONFLICT;
+		}
+		/*
+		 * For an existing all registrants type reservation
+		 * with a zero SA rservation key, preempt the existing
+		 * reservation with the new PR type and scope.
+		 */
+		if (pr_res_holder && all_reg && !(sa_res_key)) {
+			__core_scsi3_complete_pro_preempt(dev, pr_reg_n,
+				(abort) ? &preempt_and_abort_list : NULL,
+				type, scope, abort);
+
+			if (abort)
+				core_scsi3_release_preempt_and_abort(
+					&preempt_and_abort_list, pr_reg_n);
+		}
+		spin_unlock(&dev->dev_reservation_lock);
+
+		if (pr_tmpl->pr_aptpl_active) {
+			ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+					&pr_reg_n->pr_aptpl_buf[0],
+					pr_tmpl->pr_aptpl_buf_len);
+			if (!(ret))
+				printk(KERN_INFO "SPC-3 PR: Updated APTPL"
+					" metadata for  PREEMPT%s\n", (abort) ?
+					"_AND_ABORT" : "");
+		}
+
+		core_scsi3_put_pr_reg(pr_reg_n);
+		core_scsi3_pr_generation(SE_DEV(cmd));
+		return 0;
+	}
+	/*
+	 * The PREEMPTing SA reservation key matches that of the
+	 * existing persistent reservation, first, we check if
+	 * we are preempting our own reservation.
+	 * From spc4r17, section 5.7.11.4.3 Preempting
+	 * persistent reservations and registration handling
+	 *
+	 * If an all registrants persistent reservation is not
+	 * present, it is not an error for the persistent
+	 * reservation holder to preempt itself (i.e., a
+	 * PERSISTENT RESERVE OUT with a PREEMPT service action
+	 * or a PREEMPT AND ABORT service action with the
+	 * SERVICE ACTION RESERVATION KEY value equal to the
+	 * persistent reservation holder's reservation key that
+	 * is received from the persistent reservation holder).
+	 * In that case, the device server shall establish the
+	 * new persistent reservation and maintain the
+	 * registration.
+	 */
+	prh_type = pr_res_holder->pr_res_type;
+	prh_scope = pr_res_holder->pr_res_scope;
+	/*
+	 * If the SERVICE ACTION RESERVATION KEY field identifies a
+	 * persistent reservation holder (see 5.7.10), the device
+	 * server shall perform a preempt by doing the following as
+	 * an uninterrupted series of actions:
+	 *
+	 * a) Release the persistent reservation for the holder
+	 *    identified by the SERVICE ACTION RESERVATION KEY field;
+	 */
+	if (pr_reg_n != pr_res_holder)
+		__core_scsi3_complete_pro_release(dev,
+				pr_res_holder->pr_reg_nacl,
+				dev->dev_pr_res_holder, 0);
+	/*
+	 * b) Remove the registrations for all I_T nexuses identified
+	 *    by the SERVICE ACTION RESERVATION KEY field, except the
+	 *    I_T nexus that is being used for the PERSISTENT RESERVE
+	 *    OUT command. If an all registrants persistent reservation
+	 *    is present and the SERVICE ACTION RESERVATION KEY field
+	 *    is set to zero, then all registrations shall be removed
+	 *    except for that of the I_T nexus that is being used for
+	 *    the PERSISTENT RESERVE OUT command;
+	 */
+	spin_lock(&pr_tmpl->registration_lock);
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+			&pr_tmpl->registration_list, pr_reg_list) {
+
+		calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+		if (calling_it_nexus)
+			continue;
+
+		if (pr_reg->pr_res_key != sa_res_key)
+			continue;
+
+		pr_reg_nacl = pr_reg->pr_reg_nacl;
+		pr_res_mapped_lun = pr_reg->pr_res_mapped_lun;
+		__core_scsi3_free_registration(dev, pr_reg,
+				(abort) ? &preempt_and_abort_list : NULL,
+				calling_it_nexus);
+		/*
+		 * e) Establish a unit attention condition for the initiator
+		 *    port associated with every I_T nexus that lost its
+		 *    persistent reservation and/or registration, with the
+		 *    additional sense code set to REGISTRATIONS PREEMPTED;
+		 */
+		core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A,
+				ASCQ_2AH_RESERVATIONS_PREEMPTED);
+	}
+	spin_unlock(&pr_tmpl->registration_lock);
+	/*
+	 * c) Establish a persistent reservation for the preempting
+	 *    I_T nexus using the contents of the SCOPE and TYPE fields;
+	 */
+	__core_scsi3_complete_pro_preempt(dev, pr_reg_n,
+			(abort) ? &preempt_and_abort_list : NULL,
+			type, scope, abort);
+	/*
+	 * d) Process tasks as defined in 5.7.1;
+	 * e) See above..
+	 * f) If the type or scope has changed, then for every I_T nexus
+	 *    whose reservation key was not removed, except for the I_T
+	 *    nexus on which the PERSISTENT RESERVE OUT command was
+	 *    received, the device server shall establish a unit
+	 *    attention condition for the initiator port associated with
+	 *    that I_T nexus, with the additional sense code set to
+	 *    RESERVATIONS RELEASED. If the type or scope have not
+	 *    changed, then no unit attention condition(s) shall be
+	 *    established for this reason.
+	 */
+	if ((prh_type != type) || (prh_scope != scope)) {
+		spin_lock(&pr_tmpl->registration_lock);
+		list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+				&pr_tmpl->registration_list, pr_reg_list) {
+
+			calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
+			if (calling_it_nexus)
+				continue;
+
+			core_scsi3_ua_allocate(pr_reg->pr_reg_nacl,
+					pr_reg->pr_res_mapped_lun, 0x2A,
+					ASCQ_2AH_RESERVATIONS_RELEASED);
+		}
+		spin_unlock(&pr_tmpl->registration_lock);
+	}
+	spin_unlock(&dev->dev_reservation_lock);
+	/*
+	 * Call LUN_RESET logic upon list of struct t10_pr_registration,
+	 * All received CDBs for the matching existing reservation and
+	 * registrations undergo ABORT_TASK logic.
+	 *
+	 * From there, core_scsi3_release_preempt_and_abort() will
+	 * release every registration in the list (which have already
+	 * been removed from the primary pr_reg list), except the
+	 * new persistent reservation holder, the calling Initiator Port.
+	 */
+	if (abort) {
+		core_tmr_lun_reset(dev, NULL, &preempt_and_abort_list, cmd);
+		core_scsi3_release_preempt_and_abort(&preempt_and_abort_list,
+						pr_reg_n);
+	}
+
+	if (pr_tmpl->pr_aptpl_active) {
+		ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+				&pr_reg_n->pr_aptpl_buf[0],
+				pr_tmpl->pr_aptpl_buf_len);
+		if (!(ret))
+			printk("SPC-3 PR: Updated APTPL metadata for PREEMPT"
+				"%s\n", (abort) ? "_AND_ABORT" : "");
+	}
+
+	core_scsi3_put_pr_reg(pr_reg_n);
+	core_scsi3_pr_generation(SE_DEV(cmd));
+	return 0;
+}
+
+static int core_scsi3_emulate_pro_preempt(
+	struct se_cmd *cmd,
+	int type,
+	int scope,
+	u64 res_key,
+	u64 sa_res_key,
+	int abort)
+{
+	int ret = 0;
+
+	switch (type) {
+	case PR_TYPE_WRITE_EXCLUSIVE:
+	case PR_TYPE_EXCLUSIVE_ACCESS:
+	case PR_TYPE_WRITE_EXCLUSIVE_REGONLY:
+	case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY:
+	case PR_TYPE_WRITE_EXCLUSIVE_ALLREG:
+	case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG:
+		ret = core_scsi3_pro_preempt(cmd, type, scope,
+				res_key, sa_res_key, abort);
+		break;
+	default:
+		printk(KERN_ERR "SPC-3 PR: Unknown Service Action PREEMPT%s"
+			" Type: 0x%02x\n", (abort) ? "_AND_ABORT" : "", type);
+		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+	}
+
+	return ret;
+}
+
+
+static int core_scsi3_emulate_pro_register_and_move(
+	struct se_cmd *cmd,
+	u64 res_key,
+	u64 sa_res_key,
+	int aptpl,
+	int unreg)
+{
+	struct se_session *se_sess = SE_SESS(cmd);
+	struct se_device *dev = SE_DEV(cmd);
+	struct se_dev_entry *se_deve, *dest_se_deve = NULL;
+	struct se_lun *se_lun = SE_LUN(cmd);
+	struct se_node_acl *pr_res_nacl, *pr_reg_nacl, *dest_node_acl = NULL;
+	struct se_port *se_port;
+	struct se_portal_group *se_tpg, *dest_se_tpg = NULL;
+	struct target_core_fabric_ops *dest_tf_ops = NULL, *tf_ops;
+	struct t10_pr_registration *pr_reg, *pr_res_holder, *dest_pr_reg;
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+	unsigned char *initiator_str;
+	char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN];
+	u32 tid_len, tmp_tid_len;
+	int new_reg = 0, type, scope, ret, matching_iname, prf_isid;
+	unsigned short rtpi;
+	unsigned char proto_ident;
+
+	if (!(se_sess) || !(se_lun)) {
+		printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n");
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	memset(dest_iport, 0, 64);
+	memset(i_buf, 0, PR_REG_ISID_ID_LEN);
+	se_tpg = se_sess->se_tpg;
+	tf_ops = TPG_TFO(se_tpg);
+	se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun];
+	/*
+	 * Follow logic from spc4r17 Section 5.7.8, Table 50 --
+	 *	Register behaviors for a REGISTER AND MOVE service action
+	 *
+	 * Locate the existing *pr_reg via struct se_node_acl pointers
+	 */
+	pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl,
+				se_sess);
+	if (!(pr_reg)) {
+		printk(KERN_ERR "SPC-3 PR: Unable to locate PR_REGISTERED"
+			" *pr_reg for REGISTER_AND_MOVE\n");
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+	}
+	/*
+	 * The provided reservation key much match the existing reservation key
+	 * provided during this initiator's I_T nexus registration.
+	 */
+	if (res_key != pr_reg->pr_res_key) {
+		printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received"
+			" res_key: 0x%016Lx does not match existing SA REGISTER"
+			" res_key: 0x%016Lx\n", res_key, pr_reg->pr_res_key);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+	/*
+	 * The service active reservation key needs to be non zero
+	 */
+	if (!(sa_res_key)) {
+		printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received zero"
+			" sa_res_key\n");
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	}
+	/*
+	 * Determine the Relative Target Port Identifier where the reservation
+	 * will be moved to for the TransportID containing SCSI initiator WWN
+	 * information.
+	 */
+	rtpi = (buf[18] & 0xff) << 8;
+	rtpi |= buf[19] & 0xff;
+	tid_len = (buf[20] & 0xff) << 24;
+	tid_len |= (buf[21] & 0xff) << 16;
+	tid_len |= (buf[22] & 0xff) << 8;
+	tid_len |= buf[23] & 0xff;
+
+	if ((tid_len + 24) != cmd->data_length) {
+		printk(KERN_ERR "SPC-3 PR: Illegal tid_len: %u + 24 byte header"
+			" does not equal CDB data_length: %u\n", tid_len,
+			cmd->data_length);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	}
+
+	spin_lock(&dev->se_port_lock);
+	list_for_each_entry(se_port, &dev->dev_sep_list, sep_list) {
+		if (se_port->sep_rtpi != rtpi)
+			continue;
+		dest_se_tpg = se_port->sep_tpg;
+		if (!(dest_se_tpg))
+			continue;
+		dest_tf_ops = TPG_TFO(dest_se_tpg);
+		if (!(dest_tf_ops))
+			continue;
+
+		atomic_inc(&dest_se_tpg->tpg_pr_ref_count);
+		smp_mb__after_atomic_inc();
+		spin_unlock(&dev->se_port_lock);
+
+		ret = core_scsi3_tpg_depend_item(dest_se_tpg);
+		if (ret != 0) {
+			printk(KERN_ERR "core_scsi3_tpg_depend_item() failed"
+				" for dest_se_tpg\n");
+			atomic_dec(&dest_se_tpg->tpg_pr_ref_count);
+			smp_mb__after_atomic_dec();
+			core_scsi3_put_pr_reg(pr_reg);
+			return PYX_TRANSPORT_LU_COMM_FAILURE;
+		}
+
+		spin_lock(&dev->se_port_lock);
+		break;
+	}
+	spin_unlock(&dev->se_port_lock);
+
+	if (!(dest_se_tpg) || (!dest_tf_ops)) {
+		printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate"
+			" fabric ops from Relative Target Port Identifier:"
+			" %hu\n", rtpi);
+		core_scsi3_put_pr_reg(pr_reg);
+		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	}
+	proto_ident = (buf[24] & 0x0f);
+#if 0
+	printk("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:"
+			" 0x%02x\n", proto_ident);
+#endif
+	if (proto_ident != dest_tf_ops->get_fabric_proto_ident(dest_se_tpg)) {
+		printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Received"
+			" proto_ident: 0x%02x does not match ident: 0x%02x"
+			" from fabric: %s\n", proto_ident,
+			dest_tf_ops->get_fabric_proto_ident(dest_se_tpg),
+			dest_tf_ops->get_fabric_name());
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
+	}
+	if (dest_tf_ops->tpg_parse_pr_out_transport_id == NULL) {
+		printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Fabric does not"
+			" containg a valid tpg_parse_pr_out_transport_id"
+			" function pointer\n");
+		ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+		goto out;
+	}
+	initiator_str = dest_tf_ops->tpg_parse_pr_out_transport_id(dest_se_tpg,
+			(const char *)&buf[24], &tmp_tid_len, &iport_ptr);
+	if (!(initiator_str)) {
+		printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate"
+			" initiator_str from Transport ID\n");
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
+	}
+
+	printk(KERN_INFO "SPC-3 PR [%s] Extracted initiator %s identifier: %s"
+		" %s\n", dest_tf_ops->get_fabric_name(), (iport_ptr != NULL) ?
+		"port" : "device", initiator_str, (iport_ptr != NULL) ?
+		iport_ptr : "");
+	/*
+	 * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service
+	 * action specifies a TransportID that is the same as the initiator port
+	 * of the I_T nexus for the command received, then the command shall
+	 * be terminated with CHECK CONDITION status, with the sense key set to
+	 * ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD
+	 * IN PARAMETER LIST.
+	 */
+	pr_reg_nacl = pr_reg->pr_reg_nacl;
+	matching_iname = (!strcmp(initiator_str,
+				  pr_reg_nacl->initiatorname)) ? 1 : 0;
+	if (!(matching_iname))
+		goto after_iport_check;
+
+	if (!(iport_ptr) || !(pr_reg->isid_present_at_reg)) {
+		printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s"
+			" matches: %s on received I_T Nexus\n", initiator_str,
+			pr_reg_nacl->initiatorname);
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
+	}
+	if (!(strcmp(iport_ptr, pr_reg->pr_reg_isid))) {
+		printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s %s"
+			" matches: %s %s on received I_T Nexus\n",
+			initiator_str, iport_ptr, pr_reg_nacl->initiatorname,
+			pr_reg->pr_reg_isid);
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
+	}
+after_iport_check:
+	/*
+	 * Locate the destination struct se_node_acl from the received Transport ID
+	 */
+	spin_lock_bh(&dest_se_tpg->acl_node_lock);
+	dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg,
+				initiator_str);
+	if (dest_node_acl) {
+		atomic_inc(&dest_node_acl->acl_pr_ref_count);
+		smp_mb__after_atomic_inc();
+	}
+	spin_unlock_bh(&dest_se_tpg->acl_node_lock);
+
+	if (!(dest_node_acl)) {
+		printk(KERN_ERR "Unable to locate %s dest_node_acl for"
+			" TransportID%s\n", dest_tf_ops->get_fabric_name(),
+			initiator_str);
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
+	}
+	ret = core_scsi3_nodeacl_depend_item(dest_node_acl);
+	if (ret != 0) {
+		printk(KERN_ERR "core_scsi3_nodeacl_depend_item() for"
+			" dest_node_acl\n");
+		atomic_dec(&dest_node_acl->acl_pr_ref_count);
+		smp_mb__after_atomic_dec();
+		dest_node_acl = NULL;
+		ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+		goto out;
+	}
+#if 0
+	printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Found %s dest_node_acl:"
+		" %s from TransportID\n", dest_tf_ops->get_fabric_name(),
+		dest_node_acl->initiatorname);
+#endif
+	/*
+	 * Locate the struct se_dev_entry pointer for the matching RELATIVE TARGET
+	 * PORT IDENTIFIER.
+	 */
+	dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl, rtpi);
+	if (!(dest_se_deve)) {
+		printk(KERN_ERR "Unable to locate %s dest_se_deve from RTPI:"
+			" %hu\n",  dest_tf_ops->get_fabric_name(), rtpi);
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
+	}
+	
+	ret = core_scsi3_lunacl_depend_item(dest_se_deve);
+	if (ret < 0) {
+		printk(KERN_ERR "core_scsi3_lunacl_depend_item() failed\n");
+		atomic_dec(&dest_se_deve->pr_ref_count);
+		smp_mb__after_atomic_dec();
+		dest_se_deve = NULL;
+		ret = PYX_TRANSPORT_LU_COMM_FAILURE;
+		goto out;
+	}
+#if 0
+	printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Located %s node %s LUN"
+		" ACL for dest_se_deve->mapped_lun: %u\n",
+		dest_tf_ops->get_fabric_name(), dest_node_acl->initiatorname,
+		dest_se_deve->mapped_lun);
+#endif
+	/*
+	 * A persistent reservation needs to already existing in order to
+	 * successfully complete the REGISTER_AND_MOVE service action..
+	 */
+	spin_lock(&dev->dev_reservation_lock);
+	pr_res_holder = dev->dev_pr_res_holder;
+	if (!(pr_res_holder)) {
+		printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: No reservation"
+			" currently held\n");
+		spin_unlock(&dev->dev_reservation_lock);
+		ret = PYX_TRANSPORT_INVALID_CDB_FIELD;
+		goto out;
+	}
+	/*
+	 * The received on I_T Nexus must be the reservation holder.
+	 *
+	 * From spc4r17 section 5.7.8  Table 50 --
+	 * 	Register behaviors for a REGISTER AND MOVE service action
+	 */
+	if (pr_res_holder != pr_reg) {
+		printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Calling I_T"
+			" Nexus is not reservation holder\n");
+		spin_unlock(&dev->dev_reservation_lock);
+		ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+		goto out;
+	}
+	/*
+	 * From spc4r17 section 5.7.8: registering and moving reservation
+	 *
+	 * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service
+	 * action is received and the established persistent reservation is a
+	 * Write Exclusive - All Registrants type or Exclusive Access -
+	 * All Registrants type reservation, then the command shall be completed
+	 * with RESERVATION CONFLICT status.
+	 */
+	if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+	    (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
+		printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Unable to move"
+			" reservation for type: %s\n",
+			core_scsi3_pr_dump_type(pr_res_holder->pr_res_type));
+		spin_unlock(&dev->dev_reservation_lock);
+		ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+		goto out;
+	}
+	pr_res_nacl = pr_res_holder->pr_reg_nacl;
+	/*
+	 * b) Ignore the contents of the (received) SCOPE and TYPE fields;
+	 */
+	type = pr_res_holder->pr_res_type;
+	scope = pr_res_holder->pr_res_type;
+	/*
+	 * c) Associate the reservation key specified in the SERVICE ACTION
+	 *    RESERVATION KEY field with the I_T nexus specified as the
+	 *    destination of the register and move, where:
+	 *    A) The I_T nexus is specified by the TransportID and the
+	 *	 RELATIVE TARGET PORT IDENTIFIER field (see 6.14.4); and
+	 *    B) Regardless of the TransportID format used, the association for
+	 *       the initiator port is based on either the initiator port name
+	 *       (see 3.1.71) on SCSI transport protocols where port names are
+	 *       required or the initiator port identifier (see 3.1.70) on SCSI
+	 *       transport protocols where port names are not required;
+	 * d) Register the reservation key specified in the SERVICE ACTION
+	 *    RESERVATION KEY field;
+	 * e) Retain the reservation key specified in the SERVICE ACTION
+	 *    RESERVATION KEY field and associated information;
+	 *
+	 * Also, It is not an error for a REGISTER AND MOVE service action to
+	 * register an I_T nexus that is already registered with the same
+	 * reservation key or a different reservation key.
+	 */
+	dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl,
+					iport_ptr);
+	if (!(dest_pr_reg)) {
+		ret = core_scsi3_alloc_registration(SE_DEV(cmd),
+				dest_node_acl, dest_se_deve, iport_ptr,
+				sa_res_key, 0, aptpl, 2, 1);
+		if (ret != 0) {
+			spin_unlock(&dev->dev_reservation_lock);
+			ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+			goto out;
+		}
+		dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl,
+						iport_ptr);
+		new_reg = 1;
+	}
+	/*
+	 * f) Release the persistent reservation for the persistent reservation
+	 *    holder (i.e., the I_T nexus on which the
+	 */
+	__core_scsi3_complete_pro_release(dev, pr_res_nacl,
+			dev->dev_pr_res_holder, 0);
+	/*
+	 * g) Move the persistent reservation to the specified I_T nexus using
+	 *    the same scope and type as the persistent reservation released in
+	 *    item f); and
+	 */
+	dev->dev_pr_res_holder = dest_pr_reg;
+	dest_pr_reg->pr_res_holder = 1;
+	dest_pr_reg->pr_res_type = type;
+	pr_reg->pr_res_scope = scope;
+	prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0],
+				PR_REG_ISID_ID_LEN);
+	/*
+	 * Increment PRGeneration for existing registrations..
+	 */
+	if (!(new_reg))
+		dest_pr_reg->pr_res_generation = pr_tmpl->pr_generation++;
+	spin_unlock(&dev->dev_reservation_lock);
+
+	printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER_AND_MOVE"
+		" created new reservation holder TYPE: %s on object RTPI:"
+		" %hu  PRGeneration: 0x%08x\n", dest_tf_ops->get_fabric_name(),
+		core_scsi3_pr_dump_type(type), rtpi,
+		dest_pr_reg->pr_res_generation);
+	printk(KERN_INFO "SPC-3 PR Successfully moved reservation from"
+		" %s Fabric Node: %s%s -> %s Fabric Node: %s %s\n",
+		tf_ops->get_fabric_name(), pr_reg_nacl->initiatorname,
+		(prf_isid) ? &i_buf[0] : "", dest_tf_ops->get_fabric_name(),
+		dest_node_acl->initiatorname, (iport_ptr != NULL) ?
+		iport_ptr : "");
+	/*
+	 * It is now safe to release configfs group dependencies for destination
+	 * of Transport ID Initiator Device/Port Identifier
+	 */
+	core_scsi3_lunacl_undepend_item(dest_se_deve);
+	core_scsi3_nodeacl_undepend_item(dest_node_acl);
+	core_scsi3_tpg_undepend_item(dest_se_tpg);
+	/*
+	 * h) If the UNREG bit is set to one, unregister (see 5.7.11.3) the I_T
+	 * nexus on which PERSISTENT RESERVE OUT command was received.
+	 */
+	if (unreg) {
+		spin_lock(&pr_tmpl->registration_lock);
+		__core_scsi3_free_registration(dev, pr_reg, NULL, 1);
+		spin_unlock(&pr_tmpl->registration_lock);
+	} else
+		core_scsi3_put_pr_reg(pr_reg);
+
+	/*
+	 * Clear the APTPL metadata if APTPL has been disabled, otherwise
+	 * write out the updated metadata to struct file for this SCSI device.
+	 */
+	if (!(aptpl)) {
+		pr_tmpl->pr_aptpl_active = 0;
+		core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0);
+		printk("SPC-3 PR: Set APTPL Bit Deactivated for"
+				" REGISTER_AND_MOVE\n");
+	} else {
+		pr_tmpl->pr_aptpl_active = 1;
+		ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd),
+				&dest_pr_reg->pr_aptpl_buf[0],
+				pr_tmpl->pr_aptpl_buf_len);
+		if (!(ret))
+			printk("SPC-3 PR: Set APTPL Bit Activated for"
+					" REGISTER_AND_MOVE\n");
+	}
+
+	core_scsi3_put_pr_reg(dest_pr_reg);
+	return 0;
+out:
+	if (dest_se_deve)
+		core_scsi3_lunacl_undepend_item(dest_se_deve);
+	if (dest_node_acl)
+		core_scsi3_nodeacl_undepend_item(dest_node_acl);
+	core_scsi3_tpg_undepend_item(dest_se_tpg);
+	core_scsi3_put_pr_reg(pr_reg);
+	return ret;
+}
+
+static unsigned long long core_scsi3_extract_reservation_key(unsigned char *cdb)
+{
+	unsigned int __v1, __v2;
+
+	__v1 = (cdb[0] << 24) | (cdb[1] << 16) | (cdb[2] << 8) | cdb[3];
+	__v2 = (cdb[4] << 24) | (cdb[5] << 16) | (cdb[6] << 8) | cdb[7];
+
+	return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
+}
+
+/*
+ * See spc4r17 section 6.14 Table 170
+ */
+static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
+{
+	unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+	u64 res_key, sa_res_key;
+	int sa, scope, type, aptpl;
+	int spec_i_pt = 0, all_tg_pt = 0, unreg = 0;
+	/*
+	 * FIXME: A NULL struct se_session pointer means an this is not coming from
+	 * a $FABRIC_MOD's nexus, but from internal passthrough ops.
+	 */
+	if (!(SE_SESS(cmd)))
+		return PYX_TRANSPORT_LU_COMM_FAILURE;
+
+	if (cmd->data_length < 24) {
+		printk(KERN_WARNING "SPC-PR: Recieved PR OUT parameter list"
+			" length too small: %u\n", cmd->data_length);
+		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	}
+	/*
+	 * From the PERSISTENT_RESERVE_OUT command descriptor block (CDB)
+	 */
+	sa = (cdb[1] & 0x1f);
+	scope = (cdb[2] & 0xf0);
+	type = (cdb[2] & 0x0f);
+	/*
+	 * From PERSISTENT_RESERVE_OUT parameter list (payload)
+	 */
+	res_key = core_scsi3_extract_reservation_key(&buf[0]);
+	sa_res_key = core_scsi3_extract_reservation_key(&buf[8]);
+	/*
+	 * REGISTER_AND_MOVE uses a different SA parameter list containing
+	 * SCSI TransportIDs.
+	 */
+	if (sa != PRO_REGISTER_AND_MOVE) {
+		spec_i_pt = (buf[20] & 0x08);
+		all_tg_pt = (buf[20] & 0x04);
+		aptpl = (buf[20] & 0x01);
+	} else {
+		aptpl = (buf[17] & 0x01);
+		unreg = (buf[17] & 0x02);
+	}
+	/*
+	 * SPEC_I_PT=1 is only valid for Service action: REGISTER
+	 */
+	if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER))
+		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	/*
+	 * From spc4r17 section 6.14:
+	 *
+	 * If the SPEC_I_PT bit is set to zero, the service action is not
+	 * REGISTER AND MOVE, and the parameter list length is not 24, then
+	 * the command shall be terminated with CHECK CONDITION status, with
+	 * the sense key set to ILLEGAL REQUEST, and the additional sense
+	 * code set to PARAMETER LIST LENGTH ERROR.
+	 */
+	if (!(spec_i_pt) && ((cdb[1] & 0x1f) != PRO_REGISTER_AND_MOVE) &&
+	    (cmd->data_length != 24)) {
+		printk(KERN_WARNING "SPC-PR: Recieved PR OUT illegal parameter"
+			" list length: %u\n", cmd->data_length);
+		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	}
+	/*
+	 * (core_scsi3_emulate_pro_* function parameters
+	 * are defined by spc4r17 Table 174:
+	 * PERSISTENT_RESERVE_OUT service actions and valid parameters.
+	 */
+	switch (sa) {
+	case PRO_REGISTER:
+		return core_scsi3_emulate_pro_register(cmd,
+			res_key, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 0);
+	case PRO_RESERVE:
+		return core_scsi3_emulate_pro_reserve(cmd,
+			type, scope, res_key);
+	case PRO_RELEASE:
+		return core_scsi3_emulate_pro_release(cmd,
+			type, scope, res_key);
+	case PRO_CLEAR:
+		return core_scsi3_emulate_pro_clear(cmd, res_key);
+	case PRO_PREEMPT:
+		return core_scsi3_emulate_pro_preempt(cmd, type, scope,
+					res_key, sa_res_key, 0);
+	case PRO_PREEMPT_AND_ABORT:
+		return core_scsi3_emulate_pro_preempt(cmd, type, scope,
+					res_key, sa_res_key, 1);
+	case PRO_REGISTER_AND_IGNORE_EXISTING_KEY:
+		return core_scsi3_emulate_pro_register(cmd,
+			0, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 1);
+	case PRO_REGISTER_AND_MOVE:
+		return core_scsi3_emulate_pro_register_and_move(cmd, res_key,
+				sa_res_key, aptpl, unreg);
+	default:
+		printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service"
+			" action: 0x%02x\n", cdb[1] & 0x1f);
+		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+	}
+
+	return PYX_TRANSPORT_INVALID_CDB_FIELD;
+}
+
+/*
+ * PERSISTENT_RESERVE_IN Service Action READ_KEYS
+ *
+ * See spc4r17 section 5.7.6.2 and section 6.13.2, Table 160
+ */
+static int core_scsi3_pri_read_keys(struct se_cmd *cmd)
+{
+	struct se_device *se_dev = SE_DEV(cmd);
+	struct se_subsystem_dev *su_dev = SU_DEV(se_dev);
+	struct t10_pr_registration *pr_reg;
+	unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+	u32 add_len = 0, off = 8;
+
+	if (cmd->data_length < 8) {
+		printk(KERN_ERR "PRIN SA READ_KEYS SCSI Data Length: %u"
+			" too small\n", cmd->data_length);
+		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+	}
+
+	buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff);
+	buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff);
+	buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff);
+	buf[3] = (T10_RES(su_dev)->pr_generation & 0xff);
+
+	spin_lock(&T10_RES(su_dev)->registration_lock);
+	list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list,
+			pr_reg_list) {
+		/*
+		 * Check for overflow of 8byte PRI READ_KEYS payload and
+		 * next reservation key list descriptor.
+		 */
+		if ((add_len + 8) > (cmd->data_length - 8))
+			break;
+
+		buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff);
+		buf[off++] = (pr_reg->pr_res_key & 0xff);
+
+		add_len += 8;
+	}
+	spin_unlock(&T10_RES(su_dev)->registration_lock);
+
+	buf[4] = ((add_len >> 24) & 0xff);
+	buf[5] = ((add_len >> 16) & 0xff);
+	buf[6] = ((add_len >> 8) & 0xff);
+	buf[7] = (add_len & 0xff);
+
+	return 0;
+}
+
+/*
+ * PERSISTENT_RESERVE_IN Service Action READ_RESERVATION
+ *
+ * See spc4r17 section 5.7.6.3 and section 6.13.3.2 Table 161 and 162
+ */
+static int core_scsi3_pri_read_reservation(struct se_cmd *cmd)
+{
+	struct se_device *se_dev = SE_DEV(cmd);
+	struct se_subsystem_dev *su_dev = SU_DEV(se_dev);
+	struct t10_pr_registration *pr_reg;
+	unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+	u64 pr_res_key;
+	u32 add_len = 16; /* Hardcoded to 16 when a reservation is held. */
+
+	if (cmd->data_length < 8) {
+		printk(KERN_ERR "PRIN SA READ_RESERVATIONS SCSI Data Length: %u"
+			" too small\n", cmd->data_length);
+		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+	}
+
+	buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff);
+	buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff);
+	buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff);
+	buf[3] = (T10_RES(su_dev)->pr_generation & 0xff);
+
+	spin_lock(&se_dev->dev_reservation_lock);
+	pr_reg = se_dev->dev_pr_res_holder;
+	if ((pr_reg)) {
+		/*
+		 * Set the hardcoded Additional Length
+		 */
+		buf[4] = ((add_len >> 24) & 0xff);
+		buf[5] = ((add_len >> 16) & 0xff);
+		buf[6] = ((add_len >> 8) & 0xff);
+		buf[7] = (add_len & 0xff);
+
+		if (cmd->data_length < 22) {
+			spin_unlock(&se_dev->dev_reservation_lock);
+			return 0;
+		}
+		/*
+		 * Set the Reservation key.
+		 *
+		 * From spc4r17, section 5.7.10:
+		 * A persistent reservation holder has its reservation key
+		 * returned in the parameter data from a PERSISTENT
+		 * RESERVE IN command with READ RESERVATION service action as
+		 * follows:
+		 * a) For a persistent reservation of the type Write Exclusive
+		 *    - All Registrants or Exclusive Access ­ All Regitrants,
+		 *      the reservation key shall be set to zero; or
+		 * b) For all other persistent reservation types, the
+		 *    reservation key shall be set to the registered
+		 *    reservation key for the I_T nexus that holds the
+		 *    persistent reservation.
+		 */
+		if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+		    (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG))
+			pr_res_key = 0;
+		else
+			pr_res_key = pr_reg->pr_res_key;
+
+		buf[8] = ((pr_res_key >> 56) & 0xff);
+		buf[9] = ((pr_res_key >> 48) & 0xff);
+		buf[10] = ((pr_res_key >> 40) & 0xff);
+		buf[11] = ((pr_res_key >> 32) & 0xff);
+		buf[12] = ((pr_res_key >> 24) & 0xff);
+		buf[13] = ((pr_res_key >> 16) & 0xff);
+		buf[14] = ((pr_res_key >> 8) & 0xff);
+		buf[15] = (pr_res_key & 0xff);
+		/*
+		 * Set the SCOPE and TYPE
+		 */
+		buf[21] = (pr_reg->pr_res_scope & 0xf0) |
+			  (pr_reg->pr_res_type & 0x0f);
+	}
+	spin_unlock(&se_dev->dev_reservation_lock);
+
+	return 0;
+}
+
+/*
+ * PERSISTENT_RESERVE_IN Service Action REPORT_CAPABILITIES
+ *
+ * See spc4r17 section 6.13.4 Table 165
+ */
+static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd)
+{
+	struct se_device *dev = SE_DEV(cmd);
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation;
+	unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+	u16 add_len = 8; /* Hardcoded to 8. */
+
+	if (cmd->data_length < 6) {
+		printk(KERN_ERR "PRIN SA REPORT_CAPABILITIES SCSI Data Length:"
+			" %u too small\n", cmd->data_length);
+		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+	}
+
+	buf[0] = ((add_len << 8) & 0xff);
+	buf[1] = (add_len & 0xff);
+	buf[2] |= 0x10; /* CRH: Compatible Reservation Hanlding bit. */
+	buf[2] |= 0x08; /* SIP_C: Specify Initiator Ports Capable bit */
+	buf[2] |= 0x04; /* ATP_C: All Target Ports Capable bit */
+	buf[2] |= 0x01; /* PTPL_C: Persistence across Target Power Loss bit */
+	/*
+	 * We are filling in the PERSISTENT RESERVATION TYPE MASK below, so
+	 * set the TMV: Task Mask Valid bit.
+	 */
+	buf[3] |= 0x80;
+	/*
+	 * Change ALLOW COMMANDs to 0x20 or 0x40 later from Table 166
+	 */
+	buf[3] |= 0x10; /* ALLOW COMMANDs field 001b */
+	/*
+	 * PTPL_A: Persistence across Target Power Loss Active bit
+	 */
+	if (pr_tmpl->pr_aptpl_active)
+		buf[3] |= 0x01;
+	/*
+	 * Setup the PERSISTENT RESERVATION TYPE MASK from Table 167
+	 */
+	buf[4] |= 0x80; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */
+	buf[4] |= 0x40; /* PR_TYPE_EXCLUSIVE_ACCESS_REGONLY */
+	buf[4] |= 0x20; /* PR_TYPE_WRITE_EXCLUSIVE_REGONLY */
+	buf[4] |= 0x08; /* PR_TYPE_EXCLUSIVE_ACCESS */
+	buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */
+	buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */
+
+	return 0;
+}
+
+/*
+ * PERSISTENT_RESERVE_IN Service Action READ_FULL_STATUS
+ *
+ * See spc4r17 section 6.13.5 Table 168 and 169
+ */
+static int core_scsi3_pri_read_full_status(struct se_cmd *cmd)
+{
+	struct se_device *se_dev = SE_DEV(cmd);
+	struct se_node_acl *se_nacl;
+	struct se_subsystem_dev *su_dev = SU_DEV(se_dev);
+	struct se_portal_group *se_tpg;
+	struct t10_pr_registration *pr_reg, *pr_reg_tmp;
+	struct t10_reservation_template *pr_tmpl = &SU_DEV(se_dev)->t10_reservation;
+	unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
+	u32 add_desc_len = 0, add_len = 0, desc_len, exp_desc_len;
+	u32 off = 8; /* off into first Full Status descriptor */
+	int format_code = 0;
+
+	if (cmd->data_length < 8) {
+		printk(KERN_ERR "PRIN SA READ_FULL_STATUS SCSI Data Length: %u"
+			" too small\n", cmd->data_length);
+		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+	}
+
+	buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff);
+	buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff);
+	buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff);
+	buf[3] = (T10_RES(su_dev)->pr_generation & 0xff);
+
+	spin_lock(&pr_tmpl->registration_lock);
+	list_for_each_entry_safe(pr_reg, pr_reg_tmp,
+			&pr_tmpl->registration_list, pr_reg_list) {
+
+		se_nacl = pr_reg->pr_reg_nacl;
+		se_tpg = pr_reg->pr_reg_nacl->se_tpg;
+		add_desc_len = 0;
+		/*
+		 * Determine expected length of $FABRIC_MOD specific
+		 * TransportID full status descriptor..
+		 */
+		exp_desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id_len(
+				se_tpg, se_nacl, pr_reg, &format_code);
+
+		if ((exp_desc_len + add_len) > cmd->data_length) {
+			printk(KERN_WARNING "SPC-3 PRIN READ_FULL_STATUS ran"
+				" out of buffer: %d\n", cmd->data_length);
+			break;
+		}
+		/*
+		 * Set RESERVATION KEY
+		 */
+		buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff);
+		buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff);
+		buf[off++] = (pr_reg->pr_res_key & 0xff);
+		off += 4; /* Skip Over Reserved area */
+
+		/*
+		 * Set ALL_TG_PT bit if PROUT SA REGISTER had this set.
+		 */
+		if (pr_reg->pr_reg_all_tg_pt)
+			buf[off] = 0x02;
+		/*
+		 * The struct se_lun pointer will be present for the
+		 * reservation holder for PR_HOLDER bit.
+		 *
+		 * Also, if this registration is the reservation
+		 * holder, fill in SCOPE and TYPE in the next byte.
+		 */
+		if (pr_reg->pr_res_holder) {
+			buf[off++] |= 0x01;
+			buf[off++] = (pr_reg->pr_res_scope & 0xf0) |
+				     (pr_reg->pr_res_type & 0x0f);
+		} else
+			off += 2;
+
+		off += 4; /* Skip over reserved area */
+		/*
+		 * From spc4r17 6.3.15:
+		 *
+		 * If the ALL_TG_PT bit set to zero, the RELATIVE TARGET PORT
+		 * IDENTIFIER field contains the relative port identifier (see
+		 * 3.1.120) of the target port that is part of the I_T nexus
+		 * described by this full status descriptor. If the ALL_TG_PT
+		 * bit is set to one, the contents of the RELATIVE TARGET PORT
+		 * IDENTIFIER field are not defined by this standard.
+		 */
+		if (!(pr_reg->pr_reg_all_tg_pt)) {
+			struct se_port *port = pr_reg->pr_reg_tg_pt_lun->lun_sep;
+
+			buf[off++] = ((port->sep_rtpi >> 8) & 0xff);
+			buf[off++] = (port->sep_rtpi & 0xff);
+		} else
+			off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFER */
+
+		/*
+		 * Now, have the $FABRIC_MOD fill in the protocol identifier
+		 */
+		desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id(se_tpg,
+				se_nacl, pr_reg, &format_code, &buf[off+4]);
+		/*
+		 * Set the ADDITIONAL DESCRIPTOR LENGTH
+		 */
+		buf[off++] = ((desc_len >> 24) & 0xff);
+		buf[off++] = ((desc_len >> 16) & 0xff);
+		buf[off++] = ((desc_len >> 8) & 0xff);
+		buf[off++] = (desc_len & 0xff);
+		/*
+		 * Size of full desctipor header minus TransportID
+		 * containing $FABRIC_MOD specific) initiator device/port
+		 * WWN information.
+		 *
+		 *  See spc4r17 Section 6.13.5 Table 169
+		 */
+		add_desc_len = (24 + desc_len);
+
+		off += desc_len;
+		add_len += add_desc_len;
+	}
+	spin_unlock(&pr_tmpl->registration_lock);
+	/*
+	 * Set ADDITIONAL_LENGTH
+	 */
+	buf[4] = ((add_len >> 24) & 0xff);
+	buf[5] = ((add_len >> 16) & 0xff);
+	buf[6] = ((add_len >> 8) & 0xff);
+	buf[7] = (add_len & 0xff);
+
+	return 0;
+}
+
+static int core_scsi3_emulate_pr_in(struct se_cmd *cmd, unsigned char *cdb)
+{
+	switch (cdb[1] & 0x1f) {
+	case PRI_READ_KEYS:
+		return core_scsi3_pri_read_keys(cmd);
+	case PRI_READ_RESERVATION:
+		return core_scsi3_pri_read_reservation(cmd);
+	case PRI_REPORT_CAPABILITIES:
+		return core_scsi3_pri_report_capabilities(cmd);
+	case PRI_READ_FULL_STATUS:
+		return core_scsi3_pri_read_full_status(cmd);
+	default:
+		printk(KERN_ERR "Unknown PERSISTENT_RESERVE_IN service"
+			" action: 0x%02x\n", cdb[1] & 0x1f);
+		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+	}
+
+}
+
+int core_scsi3_emulate_pr(struct se_cmd *cmd)
+{
+	unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0];
+	struct se_device *dev = cmd->se_dev;
+	/*
+	 * Following spc2r20 5.5.1 Reservations overview:
+	 *
+	 * If a logical unit has been reserved by any RESERVE command and is
+	 * still reserved by any initiator, all PERSISTENT RESERVE IN and all
+	 * PERSISTENT RESERVE OUT commands shall conflict regardless of
+	 * initiator or service action and shall terminate with a RESERVATION
+	 * CONFLICT status.
+	 */
+	if (dev->dev_flags & DF_SPC2_RESERVATIONS) {
+		printk(KERN_ERR "Received PERSISTENT_RESERVE CDB while legacy"
+			" SPC-2 reservation is held, returning"
+			" RESERVATION_CONFLICT\n");
+		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+	}
+
+	return (cdb[0] == PERSISTENT_RESERVE_OUT) ?
+	       core_scsi3_emulate_pr_out(cmd, cdb) :
+	       core_scsi3_emulate_pr_in(cmd, cdb);
+}
+
+static int core_pt_reservation_check(struct se_cmd *cmd, u32 *pr_res_type)
+{
+	return 0;
+}
+
+static int core_pt_seq_non_holder(
+	struct se_cmd *cmd,
+	unsigned char *cdb,
+	u32 pr_reg_type)
+{
+	return 0;
+}
+
+int core_setup_reservations(struct se_device *dev, int force_pt)
+{
+	struct se_subsystem_dev *su_dev = dev->se_sub_dev;
+	struct t10_reservation_template *rest = &su_dev->t10_reservation;
+	/*
+	 * If this device is from Target_Core_Mod/pSCSI, use the reservations
+	 * of the Underlying SCSI hardware.  In Linux/SCSI terms, this can
+	 * cause a problem because libata and some SATA RAID HBAs appear
+	 * under Linux/SCSI, but to emulate reservations themselves.
+	 */
+	if (((TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) &&
+	    !(DEV_ATTRIB(dev)->emulate_reservations)) || force_pt) {
+		rest->res_type = SPC_PASSTHROUGH;
+		rest->pr_ops.t10_reservation_check = &core_pt_reservation_check;
+		rest->pr_ops.t10_seq_non_holder = &core_pt_seq_non_holder;
+		printk(KERN_INFO "%s: Using SPC_PASSTHROUGH, no reservation"
+			" emulation\n", TRANSPORT(dev)->name);
+		return 0;
+	}
+	/*
+	 * If SPC-3 or above is reported by real or emulated struct se_device,
+	 * use emulated Persistent Reservations.
+	 */
+	if (TRANSPORT(dev)->get_device_rev(dev) >= SCSI_3) {
+		rest->res_type = SPC3_PERSISTENT_RESERVATIONS;
+		rest->pr_ops.t10_reservation_check = &core_scsi3_pr_reservation_check;
+		rest->pr_ops.t10_seq_non_holder = &core_scsi3_pr_seq_non_holder;
+		printk(KERN_INFO "%s: Using SPC3_PERSISTENT_RESERVATIONS"
+			" emulation\n", TRANSPORT(dev)->name);
+	} else {
+		rest->res_type = SPC2_RESERVATIONS;
+		rest->pr_ops.t10_reservation_check = &core_scsi2_reservation_check;
+		rest->pr_ops.t10_seq_non_holder =
+				&core_scsi2_reservation_seq_non_holder;
+		printk(KERN_INFO "%s: Using SPC2_RESERVATIONS emulation\n",
+			TRANSPORT(dev)->name);
+	}
+
+	return 0;
+}
diff --git a/drivers/target/target_core_pr.h b/drivers/target/target_core_pr.h
new file mode 100644
index 0000000..5603bcf
--- /dev/null
+++ b/drivers/target/target_core_pr.h
@@ -0,0 +1,67 @@
+#ifndef TARGET_CORE_PR_H
+#define TARGET_CORE_PR_H
+/*
+ * PERSISTENT_RESERVE_OUT service action codes
+ *
+ * spc4r17 section 6.14.2 Table 171
+ */
+#define PRO_REGISTER				0x00
+#define PRO_RESERVE				0x01
+#define PRO_RELEASE				0x02
+#define PRO_CLEAR				0x03
+#define PRO_PREEMPT				0x04
+#define PRO_PREEMPT_AND_ABORT			0x05
+#define PRO_REGISTER_AND_IGNORE_EXISTING_KEY	0x06
+#define PRO_REGISTER_AND_MOVE			0x07
+/*
+ * PERSISTENT_RESERVE_IN service action codes
+ *
+ * spc4r17 section 6.13.1 Table 159
+ */
+#define PRI_READ_KEYS				0x00
+#define PRI_READ_RESERVATION			0x01
+#define PRI_REPORT_CAPABILITIES			0x02
+#define PRI_READ_FULL_STATUS			0x03
+/*
+ * PERSISTENT_RESERVE_ SCOPE field
+ *
+ * spc4r17 section 6.13.3.3 Table 163
+ */
+#define PR_SCOPE_LU_SCOPE			0x00
+/*
+ * PERSISTENT_RESERVE_* TYPE field
+ *
+ * spc4r17 section 6.13.3.4 Table 164
+ */
+#define PR_TYPE_WRITE_EXCLUSIVE			0x01
+#define PR_TYPE_EXCLUSIVE_ACCESS		0x03
+#define PR_TYPE_WRITE_EXCLUSIVE_REGONLY		0x05
+#define PR_TYPE_EXCLUSIVE_ACCESS_REGONLY	0x06
+#define PR_TYPE_WRITE_EXCLUSIVE_ALLREG		0x07
+#define PR_TYPE_EXCLUSIVE_ACCESS_ALLREG		0x08
+
+#define PR_APTPL_MAX_IPORT_LEN			256
+#define PR_APTPL_MAX_TPORT_LEN			256
+
+extern struct kmem_cache *t10_pr_reg_cache;
+
+extern int core_pr_dump_initiator_port(struct t10_pr_registration *,
+			char *, u32);
+extern int core_scsi2_emulate_crh(struct se_cmd *);
+extern int core_scsi3_alloc_aptpl_registration(
+			struct t10_reservation_template *, u64,
+			unsigned char *, unsigned char *, u32,
+			unsigned char *, u16, u32, int, int, u8);
+extern int core_scsi3_check_aptpl_registration(struct se_device *,
+			struct se_portal_group *, struct se_lun *,
+			struct se_lun_acl *);
+extern void core_scsi3_free_pr_reg_from_nacl(struct se_device *,
+					     struct se_node_acl *);
+extern void core_scsi3_free_all_registrations(struct se_device *);
+extern unsigned char *core_scsi3_pr_dump_type(int);
+extern int core_scsi3_check_cdb_abort_and_preempt(struct list_head *,
+						  struct se_cmd *);
+extern int core_scsi3_emulate_pr(struct se_cmd *);
+extern int core_setup_reservations(struct se_device *, int);
+
+#endif /* TARGET_CORE_PR_H */
-- 
1.7.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/