Re: [PATCH v2] gpio: adp5588-gpio: support interrupt controller
From: Andrew Morton
Date: Tue Oct 19 2010 - 16:47:25 EST
On Tue, 19 Oct 2010 16:37:48 -0400
Mike Frysinger <vapier@xxxxxxxxxx> wrote:
> From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
>
> This patch implements irq_chip functionality on ADP5588/5587 GPIO
> expanders. Only level sensitive interrupts are supported.
> Interrupts provided by this irq_chip must be requested using
> request_threaded_irq().
>
> Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
> ---
> v2
> - update feedback from akpm
The delta is below.
Could someone please update drivers/input/keyboard/adp5588-keys.c to
use the now-common symbols?
: + /* Configuration Register1 */
: +#define ADP5588_AUTO_INC (1 << 7)
: +#define ADP5588_GPIEM_CFG (1 << 6)
: +#define ADP5588_INT_CFG (1 << 4)
: +#define ADP5588_GPI_IEN (1 << 1)
: +
: +/* Interrupt Status Register */
: +#define ADP5588_GPI_INT (1 << 1)
: +#define ADP5588_KE_INT (1 << 0)
drivers/gpio/adp5588-gpio.c | 79 ++++++++++++++++------------------
include/linux/i2c/adp5588.h | 14 ++++++
2 files changed, 52 insertions(+), 41 deletions(-)
diff -puN drivers/gpio/adp5588-gpio.c~gpio-adp5588-gpio-support-interrupt-controller-update drivers/gpio/adp5588-gpio.c
--- a/drivers/gpio/adp5588-gpio.c~gpio-adp5588-gpio-support-interrupt-controller-update
+++ a/drivers/gpio/adp5588-gpio.c
@@ -18,37 +18,21 @@
#include <linux/i2c/adp5588.h>
- /* Configuration Register1 */
-#define AUTO_INC (1 << 7)
-#define GPIEM_CFG (1 << 6)
-#define OVR_FLOW_M (1 << 5)
-#define INT_CFG (1 << 4)
-#define OVR_FLOW_IEN (1 << 3)
-#define K_LCK_IM (1 << 2)
-#define GPI_IEN (1 << 1)
-#define KE_IEN (1 << 0)
-
-/* Interrupt Status Register */
-#define GPI_INT (1 << 1)
-#define KE_INT (1 << 0)
-
-#define DRV_NAME "adp5588-gpio"
-#define MAXGPIO 18
-#define ADP_BANK(offs) ((offs) >> 3)
-#define ADP_BIT(offs) (1u << ((offs) & 0x7))
+#define DRV_NAME "adp5588-gpio"
/*
* Early pre 4.0 Silicon required to delay readout by at least 25ms,
* since the Event Counter Register updated 25ms after the interrupt
* asserted.
*/
-#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4)
+#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4)
struct adp5588_gpio {
struct i2c_client *client;
struct gpio_chip gpio_chip;
struct mutex lock; /* protect cached dir, dat_out */
- struct mutex irq_lock; /* P: IRQ */
+ /* protect serialized access to the interrupt controller bus */
+ struct mutex irq_lock;
unsigned gpio_start;
unsigned irq_base;
uint8_t dat_out[3];
@@ -84,8 +68,8 @@ static int adp5588_gpio_get_value(struct
struct adp5588_gpio *dev =
container_of(chip, struct adp5588_gpio, gpio_chip);
- return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off))
- & ADP_BIT(off));
+ return !!(adp5588_gpio_read(dev->client,
+ GPIO_DAT_STAT1 + ADP5588_BANK(off)) & ADP5588_BIT(off));
}
static void adp5588_gpio_set_value(struct gpio_chip *chip,
@@ -95,8 +79,8 @@ static void adp5588_gpio_set_value(struc
struct adp5588_gpio *dev =
container_of(chip, struct adp5588_gpio, gpio_chip);
- bank = ADP_BANK(off);
- bit = ADP_BIT(off);
+ bank = ADP5588_BANK(off);
+ bit = ADP5588_BIT(off);
mutex_lock(&dev->lock);
if (val)
@@ -116,10 +100,10 @@ static int adp5588_gpio_direction_input(
struct adp5588_gpio *dev =
container_of(chip, struct adp5588_gpio, gpio_chip);
- bank = ADP_BANK(off);
+ bank = ADP5588_BANK(off);
mutex_lock(&dev->lock);
- dev->dir[bank] &= ~ADP_BIT(off);
+ dev->dir[bank] &= ~ADP5588_BIT(off);
ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]);
mutex_unlock(&dev->lock);
@@ -134,8 +118,8 @@ static int adp5588_gpio_direction_output
struct adp5588_gpio *dev =
container_of(chip, struct adp5588_gpio, gpio_chip);
- bank = ADP_BANK(off);
- bit = ADP_BIT(off);
+ bank = ADP5588_BANK(off);
+ bit = ADP5588_BIT(off);
mutex_lock(&dev->lock);
dev->dir[bank] |= bit;
@@ -168,12 +152,20 @@ static void adp5588_irq_bus_lock(unsigne
mutex_lock(&dev->irq_lock);
}
+ /*
+ * genirq core code can issue chip->mask/unmask from atomic context.
+ * This doesn't work for slow busses where an access needs to sleep.
+ * bus_sync_unlock() is therefore called outside the atomic context,
+ * syncs the current irq mask state with the slow external controller
+ * and unlocks the bus.
+ */
+
static void adp5588_irq_bus_sync_unlock(unsigned int irq)
{
struct adp5588_gpio *dev = get_irq_chip_data(irq);
int i;
- for (i = 0; i <= ADP_BANK(MAXGPIO); i++)
+ for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++)
if (dev->int_en[i] ^ dev->irq_mask[i]) {
dev->int_en[i] = dev->irq_mask[i];
adp5588_gpio_write(dev->client, GPIO_INT_EN1 + i,
@@ -188,7 +180,7 @@ static void adp5588_irq_mask(unsigned in
struct adp5588_gpio *dev = get_irq_chip_data(irq);
unsigned gpio = irq - dev->irq_base;
- dev->irq_mask[ADP_BANK(gpio)] &= ~ADP_BIT(gpio);
+ dev->irq_mask[ADP5588_BANK(gpio)] &= ~ADP5588_BIT(gpio);
}
static void adp5588_irq_unmask(unsigned int irq)
@@ -196,7 +188,7 @@ static void adp5588_irq_unmask(unsigned
struct adp5588_gpio *dev = get_irq_chip_data(irq);
unsigned gpio = irq - dev->irq_base;
- dev->irq_mask[ADP_BANK(gpio)] |= ADP_BIT(gpio);
+ dev->irq_mask[ADP5588_BANK(gpio)] |= ADP5588_BIT(gpio);
}
static int adp5588_irq_set_type(unsigned int irq, unsigned int type)
@@ -211,8 +203,8 @@ static int adp5588_irq_set_type(unsigned
return -EINVAL;
}
- bank = ADP_BANK(gpio);
- bit = ADP_BIT(gpio);
+ bank = ADP5588_BANK(gpio);
+ bit = ADP5588_BIT(gpio);
if (type & IRQ_TYPE_LEVEL_HIGH)
dev->int_lvl[bank] |= bit;
@@ -221,8 +213,6 @@ static int adp5588_irq_set_type(unsigned
else
return -EINVAL;
- might_sleep();
-
adp5588_gpio_direction_input(&dev->gpio_chip, gpio);
adp5588_gpio_write(dev->client, GPIO_INT_LVL1 + bank,
dev->int_lvl[bank]);
@@ -256,12 +246,13 @@ static irqreturn_t adp5588_irq_handler(i
int ret;
status = adp5588_gpio_read(dev->client, INT_STAT);
- if (status & GPI_INT) {
+ if (status & ADP5588_GPI_INT) {
ret = adp5588_gpio_read_intstat(dev->client, dev->irq_stat);
if (ret < 0)
memset(dev->irq_stat, 0, ARRAY_SIZE(dev->irq_stat));
- for (bank = 0; bank <= ADP_BANK(MAXGPIO); bank++, bit = 0) {
+ for (bank = 0; bank <= ADP5588_BANK(ADP5588_MAXGPIO);
+ bank++, bit = 0) {
pending = dev->irq_stat[bank] & dev->irq_mask[bank];
while (pending) {
@@ -288,7 +279,7 @@ static int adp5588_irq_setup(struct adp5
unsigned gpio;
int ret;
- adp5588_gpio_write(client, CFG, AUTO_INC);
+ adp5588_gpio_write(client, CFG, ADP5588_AUTO_INC);
adp5588_gpio_write(client, INT_STAT, -1); /* status is W1C */
adp5588_gpio_read_intstat(client, dev->irq_stat); /* read to clear */
@@ -302,6 +293,10 @@ static int adp5588_irq_setup(struct adp5
handle_level_irq);
set_irq_nested_thread(irq, 1);
#ifdef CONFIG_ARM
+ /*
+ * ARM needs us to explicitly flag the IRQ as VALID,
+ * once we do so, it will also set the noprobe.
+ */
set_irq_flags(irq, IRQF_VALID);
#else
set_irq_noprobe(irq);
@@ -320,7 +315,8 @@ static int adp5588_irq_setup(struct adp5
}
dev->gpio_chip.to_irq = adp5588_gpio_to_irq;
- adp5588_gpio_write(client, CFG, AUTO_INC | INT_CFG | GPI_INT);
+ adp5588_gpio_write(client, CFG,
+ ADP5588_AUTO_INC | ADP5588_INT_CFG | ADP5588_GPI_INT);
return 0;
@@ -328,6 +324,7 @@ out:
dev->irq_base = 0;
return ret;
}
+
static void adp5588_irq_teardown(struct adp5588_gpio *dev)
{
if (dev->irq_base)
@@ -383,7 +380,7 @@ static int __devinit adp5588_gpio_probe(
gc->can_sleep = 1;
gc->base = pdata->gpio_start;
- gc->ngpio = MAXGPIO;
+ gc->ngpio = ADP5588_MAXGPIO;
gc->label = client->name;
gc->owner = THIS_MODULE;
@@ -395,7 +392,7 @@ static int __devinit adp5588_gpio_probe(
revid = ret & ADP5588_DEVICE_ID_MASK;
- for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) {
+ for (i = 0, ret = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i);
dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i);
ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0);
diff -puN include/linux/i2c/adp5588.h~gpio-adp5588-gpio-support-interrupt-controller-update include/linux/i2c/adp5588.h
--- a/include/linux/i2c/adp5588.h~gpio-adp5588-gpio-support-interrupt-controller-update
+++ a/include/linux/i2c/adp5588.h
@@ -74,6 +74,20 @@
#define ADP5588_DEVICE_ID_MASK 0xF
+ /* Configuration Register1 */
+#define ADP5588_AUTO_INC (1 << 7)
+#define ADP5588_GPIEM_CFG (1 << 6)
+#define ADP5588_INT_CFG (1 << 4)
+#define ADP5588_GPI_IEN (1 << 1)
+
+/* Interrupt Status Register */
+#define ADP5588_GPI_INT (1 << 1)
+#define ADP5588_KE_INT (1 << 0)
+
+#define ADP5588_MAXGPIO 18
+#define ADP5588_BANK(offs) ((offs) >> 3)
+#define ADP5588_BIT(offs) (1u << ((offs) & 0x7))
+
/* Put one of these structures in i2c_board_info platform_data */
#define ADP5588_KEYMAPSIZE 80
_
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/