[PATCH 7/7] blackfin: convert to clocksource_register_hz

[John Stultz]

This converts the blackfin clocksource to use clocksource_register_hz.

This is untested, so any assistance in testing would be appreciated!

Signed-off-by: John Stultz <johnstul@xxxxxxxxxx>
CC: Mike Frysinger <vapier@xxxxxxxxxx>
CC: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
---
 arch/blackfin/kernel/time-ts.c |   35 ++---------------------------------
 1 files changed, 2 insertions(+), 33 deletions(-)

diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 8c9a43d..4a01371 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -23,29 +23,6 @@
 #include <asm/gptimers.h>
 #include <asm/nmi.h>
 
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george@xxxxxxxxxx) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz) / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better precision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@xxxxxxxxxx)
- *
- *			-johnstul@xxxxxxxxxx "math is hard, lets go shopping!"
- */
-
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
 
@@ -63,7 +40,6 @@ static struct clocksource bfin_cs_cycles = {
 	.rating		= 400,
 	.read		= bfin_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(64),
-	.shift		= CYC2NS_SCALE_FACTOR,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -75,10 +51,7 @@ static inline unsigned long long bfin_cs_cycles_sched_clock(void)
 
 static int __init bfin_cs_cycles_init(void)
 {
-	bfin_cs_cycles.mult = \
-		clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
-
-	if (clocksource_register(&bfin_cs_cycles))
+	if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
 		panic("failed to register clocksource");
 
 	return 0;
@@ -111,7 +84,6 @@ static struct clocksource bfin_cs_gptimer0 = {
 	.rating		= 350,
 	.read		= bfin_read_gptimer0,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= CYC2NS_SCALE_FACTOR,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -125,10 +97,7 @@ static int __init bfin_cs_gptimer0_init(void)
 {
 	setup_gptimer0();
 
-	bfin_cs_gptimer0.mult = \
-		clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift);
-
-	if (clocksource_register(&bfin_cs_gptimer0))
+	if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
 		panic("failed to register clocksource");
 
 	return 0;
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/