Re: booting "nosmp" kernel causing ACPI errors

[Zhang Rui]

Hi, Bernard,

On Sun, 2010-10-17 at 00:45 +0800, Bernard Pidoux wrote:
> Hi,
> 
> I observed ACPI errors when booting 2.6.35.7 kernel with "nosmp" argument.
> dmesg shows a warning message starting with :
> WARNING: at mm/page_alloc.c:1981 __alloc_pages_nodemask+0x5b4/0x6d0()
> +Hardware name: MS-7519
> +Modules linked in:
> +Pid: 1, comm: swapper Not tainted 2.6.35.7 #2
> 
it seems that ACPI is trying to load an invalid table.
would you please attach the acpidump of your laptop, both with and
without "nosmp"?

thanks,
rui
> This is followed by ACPI error messages and /proc/interrupts show that
> interrupts 0-15 are then handled by XT-PIC-XT
> instead of IO-APIC-edge and IO-APIC-fasteoi when runing smp kernel.
> 
> Here is lspci dump :
> 
> 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller 
> (rev 03)
> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root 
> Port (rev 03)
> 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #4
> 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #5
> 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #6
> 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 
> EHCI Controller #2
> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio 
> Controller
> 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express 
> Root Port 1
> 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express 
> Port 2
> 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express 
> Root Port 6
> 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #1
> 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #2
> 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB 
> UHCI Controller #3
> 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 
> EHCI Controller #1
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
> 00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface 
> Controller
> 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port 
> SATA IDE Controller #1
> 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
> 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port 
> SATA IDE Controller #2
> 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 
> GS] (rev a1)
> 02:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
> 
> I observed the same issue with another machine with also an MSI 
> motherboard but using a PCI bridge VIA VT8237/VX700
> even when booting with "pci=use_crs" argument.
> 
> Attached is diff -ruN file between 2.6.35.7 kernel without and with 
> "nosmp" boot argument.
> 
> Bernard
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/