[PATCH 06/12] hwmon: lis3: restore axis enabled bits

[Samu Onkalo]

All axis enable bits are set to 0 at module remove.
Restore reset default value at init.

Signed-off-by: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
---
 drivers/hwmon/lis3lv02d_i2c.c |    2 +-
 drivers/hwmon/lis3lv02d_spi.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index 98983cc..36171bf 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -83,7 +83,7 @@ static int lis3_i2c_init(struct lis3lv02d *lis3)
 	if (ret < 0)
 		return ret;
 
-	reg |= CTRL1_PD0;
+	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
 	return lis3->write(lis3, CTRL_REG1, reg);
 }
 
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
index b9be5e3..778885d 100644
--- a/drivers/hwmon/lis3lv02d_spi.c
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -50,7 +50,7 @@ static int lis3_spi_init(struct lis3lv02d *lis3)
 	if (ret < 0)
 		return ret;
 
-	reg |= CTRL1_PD0;
+	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
 	return lis3->write(lis3, CTRL_REG1, reg);
 }
 
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/