[PATCH 28/49] tty: Add a new file /proc/tty/consoles

[Greg Kroah-Hartman]

From: Dr. Werner Fink <werner@xxxxxxx>

Add a new file /proc/tty/consoles to be able to determine the registered
system console lines.  If the reading process holds /dev/console open at
the regular standard input stream the active device will be marked by an
asterisk.  Show possible operations and also decode the used flags of
the listed console lines.

Signed-off-by: Werner Fink <werner@xxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 Documentation/filesystems/proc.txt |   32 +++++++
 fs/proc/proc_tty.c                 |  158 ++++++++++++++++++++++++++++++++++++
 2 files changed, 190 insertions(+), 0 deletions(-)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index a6aca87..98223a6 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1075,6 +1075,7 @@ Table 1-11: Files in /proc/tty
  drivers       list of drivers and their usage                
  ldiscs        registered line disciplines                    
  driver/serial usage statistic and status of single tty lines 
+ consoles      registered system console lines
 ..............................................................................
 
 To see  which  tty's  are  currently in use, you can simply look into the file
@@ -1093,6 +1094,37 @@ To see  which  tty's  are  currently in use, you can simply look into the file
   /dev/tty             /dev/tty        5       0 system:/dev/tty 
   unknown              /dev/tty        4    1-63 console 
 
+To see which character device lines are currently used for the system console
+/dev/console, you may simply look into the file /proc/tty/consoles:
+
+  > cat /proc/tty/consoles
+  tty0                 -WU (ECp)       4:7
+  ttyS0                -W- (Ep)        4:64
+
+The columns are:
+
+  device               name of the device
+  operations           R = can do read operations
+                       W = can do write operations
+                       U = can do unblank
+  flags                E = it is enabled
+                       C = it is prefered console
+                       B = it is primary boot console
+                       p = it is used for printk buffer
+                       b = it is not a TTY but a Braille device
+                       a = it is safe to use when cpu is offline
+                       * = it is standard input of the reading process
+  major:minor          major and minor number of the device separated by a colon
+
+If the reading process holds /dev/console open at the regular standard input
+stream the active device will be marked by an asterisk:
+
+  > cat /proc/tty/consoles < /dev/console
+  tty0                 -WU (ECp*)      4:7
+  ttyS0                -W- (Ep)        4:64
+  > tty
+  /dev/pts/3
+
 
 1.8 Miscellaneous kernel statistics in /proc/stat
 -------------------------------------------------
diff --git a/fs/proc/proc_tty.c b/fs/proc/proc_tty.c
index 83adcc8..dc44f94 100644
--- a/fs/proc/proc_tty.c
+++ b/fs/proc/proc_tty.c
@@ -12,7 +12,10 @@
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
 #include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/console.h>
 #include <linux/seq_file.h>
+#include <linux/fdtable.h>
 #include <linux/bitops.h>
 
 /*
@@ -137,6 +140,160 @@ static const struct file_operations proc_tty_drivers_operations = {
 };
 
 /*
+ * The device ID of file descriptor 0 of the current reading
+ * task if a character device...
+ */
+static dev_t current_dev;
+
+/*
+ * This is the handler for /proc/tty/consoles
+ */
+static int show_console_dev(struct seq_file *m, void *v)
+{
+	const struct tty_driver *driver;
+	struct console *con;
+	int index, len;
+	char flags[10];
+	dev_t dev;
+
+	if (v == SEQ_START_TOKEN)
+		return 0;
+	con = (struct console *)v;
+	if (!con)
+		return 0;
+	driver = con->device(con, &index);
+	if (!driver)
+		return 0;
+	dev = MKDEV(driver->major, driver->minor_start) + index;
+
+	index = 0;
+	if (con->flags & CON_ENABLED)
+		flags[index++] = 'E';
+	if (con->flags & CON_CONSDEV)
+		flags[index++] = 'C';
+	if (con->flags & CON_BOOT)
+		flags[index++] = 'B';
+	if (con->flags & CON_PRINTBUFFER)
+		flags[index++] = 'p';
+	if (con->flags & CON_BRL)
+		flags[index++] = 'b';
+	if (con->flags & CON_ANYTIME)
+		flags[index++] = 'a';
+	if (current_dev == dev)
+		flags[index++] = '*';
+	flags[index] = 0;
+
+	seq_printf(m, "%s%d%n", con->name, con->index, &len);
+	len = 21 - len;
+	if (len < 1)
+		len = 1;
+	seq_printf(m, "%*c", len, ' ');
+	seq_printf(m, "%c%c%c (%s)%n", con->read ? 'R' : '-',
+			con->write ? 'W' : '-', con->unblank ? 'U' : '-',
+			flags, &len);
+	len = 13 - len;
+	if (len < 1)
+		len = 1;
+	seq_printf(m, "%*c%4d:%d\n", len, ' ', MAJOR(dev), MINOR(dev));
+
+	return 0;
+}
+
+/* iterator for consoles */
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	struct console *con;
+	loff_t off = 0;
+
+	if (*pos == 0)
+		return SEQ_START_TOKEN;
+
+	acquire_console_sem();
+	for (con = console_drivers; con; con = con->next) {
+		if (!con->device)
+			continue;
+		if (++off == *pos)
+			break;
+	}
+	release_console_sem();
+
+	return con;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	struct console *con;
+
+	acquire_console_sem();
+	if (v == SEQ_START_TOKEN)
+		con = console_drivers;
+	else
+		con = ((struct console *)v)->next;
+	for (; con; con = con->next) {
+		if (!con->device)
+			continue;
+		++*pos;
+		break;
+	}
+	release_console_sem();
+
+	return con;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+static const struct seq_operations tty_consoles_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_console_dev
+};
+
+/*
+ * Used for open /proc/tty/consoles. Before this detect
+ * the device ID of file descriptor 0 of the current
+ * reading task if a character device...
+ */
+static int tty_consoles_open(struct inode *inode, struct file *file)
+{
+	struct files_struct *curfiles;
+
+	current_dev = 0;
+	curfiles = get_files_struct(current);
+	if (curfiles) {
+		const struct file *curfp;
+		spin_lock(&curfiles->file_lock);
+		curfp = fcheck_files(curfiles, 0);
+		if (curfp && curfp->private_data) {
+			const struct inode *inode;
+			dget(curfp->f_dentry);
+			inode = curfp->f_dentry->d_inode;
+			if (S_ISCHR(inode->i_mode)) {
+				struct tty_struct *tty;
+				tty = (struct tty_struct *)curfp->private_data;
+				if (tty && tty->magic == TTY_MAGIC) {
+					tty = tty_pair_get_tty(tty);
+					current_dev = tty_devnum(tty);
+				}
+			}
+			dput(curfp->f_dentry);
+		}
+		spin_unlock(&curfiles->file_lock);
+		put_files_struct(curfiles);
+	}
+	return seq_open(file, &tty_consoles_op);
+}
+
+static const struct file_operations proc_tty_consoles_operations = {
+	.open		= tty_consoles_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+/*
  * This function is called by tty_register_driver() to handle
  * registering the driver's /proc handler into /proc/tty/driver/<foo>
  */
@@ -186,4 +343,5 @@ void __init proc_tty_init(void)
 	proc_tty_driver = proc_mkdir_mode("tty/driver", S_IRUSR|S_IXUSR, NULL);
 	proc_create("tty/ldiscs", 0, NULL, &tty_ldiscs_proc_fops);
 	proc_create("tty/drivers", 0, NULL, &proc_tty_drivers_operations);
+	proc_create("tty/consoles", 0, NULL, &proc_tty_consoles_operations);
 }
-- 
1.7.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/