[11/66] RDMA/cxgb3: Turn off RX coalescing for iWARP connections

From: Greg KH
Date: Fri Oct 22 2010 - 14:54:21 EST


2.6.32-stable review patch. If anyone has any objections, please let us know.

------------------

From: Steve Wise <swise@xxxxxxxxxxxxxxxxxxxxx>

commit bec658ff31453a5726b1c188674d587a5d40c482 upstream.

The HW by default has RX coalescing on. For iWARP connections, this
causes a 100ms delay in connection establishement due to the ingress
MPA Start message being stalled in HW. So explicitly turn RX
coalescing off when setting up iWARP connections.

This was causing very bad performance for NP64 gather operations using
Open MPI, due to the way it sets up connections on larger jobs.

Signed-off-by: Steve Wise <swise@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Roland Dreier <rolandd@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
drivers/infiniband/hw/cxgb3/iwch_cm.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -486,7 +486,8 @@ static int send_connect(struct iwch_ep *
V_MSS_IDX(mtu_idx) |
V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx);
opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10);
- opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor);
+ opt2 = F_RX_COALESCE_VALID | V_RX_COALESCE(0) | V_FLAVORS_VALID(1) |
+ V_CONG_CONTROL_FLAVOR(cong_flavor);
skb->priority = CPL_PRIORITY_SETUP;
set_arp_failure_handler(skb, act_open_req_arp_failure);

@@ -1303,7 +1304,8 @@ static void accept_cr(struct iwch_ep *ep
V_MSS_IDX(mtu_idx) |
V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx);
opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10);
- opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor);
+ opt2 = F_RX_COALESCE_VALID | V_RX_COALESCE(0) | V_FLAVORS_VALID(1) |
+ V_CONG_CONTROL_FLAVOR(cong_flavor);

rpl = cplhdr(skb);
rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/