[072/103] V4L/DVB: dib7770: enable the current mirror

[Greg KH]

2.6.35-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Olivier Grenie <olivier.grenie@xxxxxxxxx>

commit 90e12cec707204930934acdb5efce5f94a163a5f upstream.

To improve performance on DiB7770-devices enabling the current mirror
is needed.

This patch adds an option to the dib7000p-driver to do that and it
creates a separate device-entry in dib0700-device to use those changes
on hardware which is using the DiB7770.

Signed-off-by: Olivier Grenie <olivier.grenie@xxxxxxxxx>
Signed-off-by: Patrick Boettcher <patrick.boettcher@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
 drivers/media/dvb/dvb-usb/dib0700_devices.c |   53 +++++++++++++++++++++++++++-
 drivers/media/dvb/frontends/dib7000p.c      |    2 +
 drivers/media/dvb/frontends/dib7000p.h      |    3 +
 3 files changed, 57 insertions(+), 1 deletion(-)

--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1240,6 +1240,57 @@ static int stk7070p_frontend_attach(stru
 	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+/* STK7770P */
+static struct dib7000p_config dib7770p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &dib7070_agc_config,
+	.bw  = &dib7070_bw_config_12_mhz,
+	.tuner_is_baseband = 1,
+	.spur_protect = 1,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.hostbus_diversity = 1,
+	.enable_current_mirror = 1,
+};
+
+static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+	if (p->idVendor  == cpu_to_le16(USB_VID_PINNACLE) &&
+	    p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	else
+		dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				     &dib7770p_dib7000p_config) != 0) {
+		err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+		    __func__);
+		return -ENODEV;
+	}
+
+	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+		&dib7770p_dib7000p_config);
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
 /* DIB807x generic */
 static struct dibx000_agc_config dib807x_agc_config[2] = {
 	{
@@ -2592,7 +2643,7 @@ struct dvb_usb_device_properties dib0700
 				.pid_filter_count = 32,
 				.pid_filter       = stk70x0p_pid_filter,
 				.pid_filter_ctrl  = stk70x0p_pid_filter_ctrl,
-				.frontend_attach  = stk7070p_frontend_attach,
+				.frontend_attach  = stk7770p_frontend_attach,
 				.tuner_attach     = dib7770p_tuner_attach,
 
 				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -260,6 +260,8 @@ static void dib7000p_set_adc_state(struc
 
 //	dprintk( "908: %x, 909: %x\n", reg_908, reg_909);
 
+	reg_908 |= (state->cfg.enable_current_mirror & 1) << 7;
+
 	dib7000p_write_word(state, 908, reg_908);
 	dib7000p_write_word(state, 909, reg_909);
 }
--- a/drivers/media/dvb/frontends/dib7000p.h
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -33,6 +33,9 @@ struct dib7000p_config {
 	int (*agc_control) (struct dvb_frontend *, u8 before);
 
 	u8 output_mode;
+
+	u8 enable_current_mirror : 1;
+
 };
 
 #define DEFAULT_DIB7000P_I2C_ADDRESS 18


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/