Re: [PATCH 06/12] hwmon: lis3: restore axis enabled bits

[Ãric Piel]

Op 22-10-10 13:57, Samu Onkalo schreef:
> All axis enable bits are set to 0 at module remove.
> Restore reset default value at init.
>
> Signed-off-by: Samu Onkalo<samu.p.onkalo@xxxxxxxxx>
Acked-by: Eric Piel <eric.piel@xxxxxxxxxxxxxxxx>
> ---
>   drivers/hwmon/lis3lv02d_i2c.c |    2 +-
>   drivers/hwmon/lis3lv02d_spi.c |    2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
> index 98983cc..36171bf 100644
> --- a/drivers/hwmon/lis3lv02d_i2c.c
> +++ b/drivers/hwmon/lis3lv02d_i2c.c
> @@ -83,7 +83,7 @@ static int lis3_i2c_init(struct lis3lv02d *lis3)
>   	if (ret<  0)
>   		return ret;
>
> -	reg |= CTRL1_PD0;
> +	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
>   	return lis3->write(lis3, CTRL_REG1, reg);
>   }
>
> diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
> index b9be5e3..778885d 100644
> --- a/drivers/hwmon/lis3lv02d_spi.c
> +++ b/drivers/hwmon/lis3lv02d_spi.c
> @@ -50,7 +50,7 @@ static int lis3_spi_init(struct lis3lv02d *lis3)
>   	if (ret<  0)
>   		return ret;
>
> -	reg |= CTRL1_PD0;
> +	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
>   	return lis3->write(lis3, CTRL_REG1, reg);
>   }

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/