[PATCH 12/22] trivial: fix typos concerning "initiali[zs]e"

From: Uwe Kleine-KÃnig
Date: Tue Oct 26 2010 - 16:01:53 EST

Signed-off-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
---
Documentation/scsi/ChangeLog.lpfc | 2 +-
Documentation/timers/timer_stats.txt | 2 +-
arch/arm/mach-bcmring/csp/chipc/chipcHw.c | 2 +-
arch/arm/mach-bcmring/csp/tmr/tmrHw.c | 2 +-
arch/arm/mach-bcmring/dma.c | 2 +-
arch/arm/mach-omap2/serial.c | 2 +-
arch/mips/jz4740/board-qi_lb60.c | 4 ++--
arch/mips/jz4740/gpio.c | 2 +-
arch/powerpc/oprofile/op_model_cell.c | 2 +-
arch/x86/kernel/amd_iommu.c | 4 ++--
block/cfq-iosched.c | 2 +-
drivers/acpi/acpica/acobject.h | 2 +-
drivers/ata/sata_vsc.c | 2 +-
drivers/atm/iphase.c | 4 ++--
drivers/base/power/main.c | 2 +-
drivers/dma/intel_mid_dma.c | 6 +++---
drivers/edac/ppc4xx_edac.c | 6 +++---
drivers/isdn/gigaset/bas-gigaset.c | 4 ++--
drivers/isdn/gigaset/ser-gigaset.c | 4 ++--
drivers/isdn/gigaset/usb-gigaset.c | 4 ++--
drivers/media/video/davinci/vpss.c | 2 +-
drivers/misc/arm-charlcd.c | 2 +-
drivers/net/bnx2x/bnx2x_main.c | 2 +-
drivers/net/bonding/bond_3ad.c | 2 +-
drivers/net/cxgb3/mc5.c | 2 +-
drivers/net/ixgbe/ixgbe_82599.c | 4 ++--
drivers/net/wimax/i2400m/i2400m.h | 2 +-
drivers/net/wireless/b43/phy_g.c | 2 +-
drivers/net/wireless/b43legacy/phy.c | 2 +-
drivers/pcmcia/m8xx_pcmcia.c | 2 +-
drivers/platform/x86/thinkpad_acpi.c | 2 +-
drivers/scsi/aacraid/commsup.c | 2 +-
drivers/scsi/aic94xx/aic94xx_seq.c | 6 +++---
drivers/scsi/bfa/bfa_fcs_lport.c | 2 +-
drivers/scsi/dc395x.c | 8 ++++----
drivers/scsi/lpfc/lpfc_attr.c | 2 +-
drivers/scsi/pm8001/pm8001_init.c | 2 +-
drivers/scsi/scsi_netlink.c | 2 +-
drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +-
drivers/staging/stradis/stradis.c | 2 +-
drivers/usb/misc/adutux.c | 2 +-
drivers/usb/misc/iowarrior.c | 2 +-
drivers/usb/misc/ldusb.c | 2 +-
drivers/usb/musb/musb_gadget.c | 2 +-
fs/ext4/extents.c | 4 ++--
fs/ext4/inode.c | 4 ++--
fs/xfs/linux-2.6/xfs_super.c | 2 +-
include/linux/cgroup.h | 2 +-
kernel/debug/kdb/kdb_main.c | 2 +-
kernel/time/clocksource.c | 2 +-
net/ipv4/tcp_output.c | 2 +-
scripts/mod/modpost.c | 2 +-
sound/soc/codecs/max98088.c | 2 +-
53 files changed, 71 insertions(+), 71 deletions(-)

diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index 337c924..5e83769 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -573,7 +573,7 @@ Changes from 20041018 to 20041123
* Backround nodev_timeout processing to DPC This enables us to
unblock (stop dev_loss_tmo) when appopriate.
* Fix array discovery with multiple luns. The max_luns was 0 at
- the time the host structure was intialized. lpfc_cfg_params
+ the time the host structure was initialized. lpfc_cfg_params
then set the max_luns to the correct value afterwards.
* Remove unused define LPFC_MAX_LUN and set the default value of
lpfc_max_lun parameter to 512.
diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt
index 9bd00fc..8abd40b 100644
--- a/Documentation/timers/timer_stats.txt
+++ b/Documentation/timers/timer_stats.txt
@@ -19,7 +19,7 @@ Linux system over a sample period:

- the pid of the task(process) which initialized the timer
- the name of the process which initialized the timer
-- the function where the timer was intialized
+- the function where the timer was initialized
- the callback function which is associated to the timer
- the number of events (callbacks)

diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
index b3a61d8..96273ff 100644
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -757,7 +757,7 @@ static int chipcHw_divide(int num, int denom)
t = t << 1;
}

- /* Intialize the result */
+ /* Initialize the result */
r = 0;

do {
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
index 5c1c9a0..16225e4 100644
--- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -558,7 +558,7 @@ static int tmrHw_divide(int num, int denom)
t = t << 1;
}

- /* Intialize the result */
+ /* Initialize the result */
r = 0;

do {
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 77eb35c..8d1baf3 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -671,7 +671,7 @@ static int ConfigChannel(DMA_Handle_t handle)

/****************************************************************************/
/**
-* Intializes all of the data structures associated with the DMA.
+* Initializes all of the data structures associated with the DMA.
* @return
* >= 0 - Initialization was successfull.
*
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index becf0e3..db79ac6 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -843,7 +843,7 @@ void __init omap_serial_init_port(int port)
}

/**
- * omap_serial_init() - intialize all supported serial ports
+ * omap_serial_init() - initialize all supported serial ports
*
* Initializes all available UARTs as serial ports. Platforms
* can call this function when they want to have default behaviour
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 5742bb4..de4433c 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -65,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = {

/* Early prototypes of the QI LB60 had only 1GB of NAND.
* In order to support these devices aswell the partition and ecc layout is
- * initalized depending on the NAND size */
+ * initialized depending on the NAND size */
static struct mtd_partition qi_lb60_partitions_1gb[] = {
{
.name = "NAND BOOT partition",
@@ -464,7 +464,7 @@ static int __init qi_lb60_board_setup(void)
board_gpio_setup();

if (qi_lb60_init_platform_devices())
- panic("Failed to initalize platform devices\n");
+ panic("Failed to initialize platform devices\n");

return 0;
}
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 38f60f3..88e6aed 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -546,7 +546,7 @@ static int __init jz4740_gpio_init(void)
for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);

- printk(KERN_INFO "JZ4740 GPIO initalized\n");
+ printk(KERN_INFO "JZ4740 GPIO initialized\n");

return 0;
}
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 7fd90d0..c4d2b71 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1469,7 +1469,7 @@ static int cell_global_start(struct op_counter_config *ctr)
* The pm_interval register is setup to write the SPU PC value into the
* trace buffer at the maximum rate possible. The trace buffer is configured
* to store the PCs, wrapping when it is full. The performance counter is
- * intialized to the max hardware count minus the number of events, N, between
+ * initialized to the max hardware count minus the number of events, N, between
* samples. Once the N events have occured, a HW counter overflow occurs
* causing the generation of a HW counter interrupt which also stops the
* writing of the SPU PC values to the trace buffer. Hence the last PC
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index d2fdb08..57ca777 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1086,7 +1086,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom,

dma_dom->aperture_size += APERTURE_RANGE_SIZE;

- /* Intialize the exclusion range if necessary */
+ /* Initialize the exclusion range if necessary */
for_each_iommu(iommu) {
if (iommu->exclusion_start &&
iommu->exclusion_start >= dma_dom->aperture[index]->offset
@@ -1353,7 +1353,7 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)

/*
* Allocates a new protection domain usable for the dma_ops functions.
- * It also intializes the page table and the address allocator data
+ * It also initializes the page table and the address allocator data
* structures required for the dma_ops interface
*/
static struct dma_ops_domain *dma_ops_domain_alloc(void)
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 4cd59b0..78ee4b1 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1030,7 +1030,7 @@ cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create)

/*
* Add group onto cgroup list. It might happen that bdi->dev is
- * not initiliazed yet. Initialize this new group without major
+ * not initialized yet. Initialize this new group without major
* and minor info and this info will be filled in once a new thread
* comes for IO. See code above.
*/
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index bdbfaf2..962a3cc 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -93,7 +93,7 @@

#define AOPOBJ_AML_CONSTANT 0x01 /* Integer is an AML constant */
#define AOPOBJ_STATIC_POINTER 0x02 /* Data is part of an ACPI table, don't delete */
-#define AOPOBJ_DATA_VALID 0x04 /* Object is intialized and data is valid */
+#define AOPOBJ_DATA_VALID 0x04 /* Object is initialized and data is valid */
#define AOPOBJ_OBJECT_INITIALIZED 0x08 /* Region is initialized, _REG was run */
#define AOPOBJ_SETUP_COMPLETE 0x10 /* Region setup is complete */
#define AOPOBJ_INVALID 0x20 /* Host OS won't allow a Region address */
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index b777176..e079cf2 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -370,7 +370,7 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
if (pci_resource_len(pdev, 0) == 0)
return -ENODEV;

- /* map IO regions and intialize host accordingly */
+ /* map IO regions and initialize host accordingly */
rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
if (rc == -EBUSY)
pcim_pin_device(pdev);
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 9309d47..ad8e207 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2063,7 +2063,7 @@ static int tx_init(struct atm_dev *dev)
- UBR Table size is 4K
- UBR wait queue is 4K
since the table and wait queues are contiguous, all the bytes
- can be initialized by one memeset.
+ can be initialized by one memeset.
*/

vcsize_sel = 0;
@@ -2089,7 +2089,7 @@ static int tx_init(struct atm_dev *dev)
- ABR Table size is 2K
- ABR wait queue is 2K
since the table and wait queues are contiguous, all the bytes
- can be intialized by one memeset.
+ can be initialized by one memeset.
*/
i = ABR_SCHED_TABLE * iadev->memSize;
writew((i >> 11) & 0xffff, iadev->seg_reg+ABR_SBPTR_BASE);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 31b5266..c5356ef 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -8,7 +8,7 @@
*
*
* The driver model core calls device_pm_add() when a device is registered.
- * This will intialize the embedded device_pm_info object in the device
+ * This will initialize the embedded device_pm_info object in the device
* and add it to the list of power-controlled devices. sysfs entries for
* controlling device power management will also be added.
*
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index 338bc4e..da8b7f1 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -1060,8 +1060,8 @@ static irqreturn_t intel_mid_dma_interrupt2(int irq, void *data)
* mid_setup_dma - Setup the DMA controller
* @pdev: Controller PCI device structure
*
- * Initilize the DMA controller, channels, registers with DMA engine,
- * ISR. Initilize DMA controller channels.
+ * Initialize the DMA controller, channels, registers with DMA engine,
+ * ISR. Initialize DMA controller channels.
*/
static int mid_setup_dma(struct pci_dev *pdev)
{
@@ -1219,7 +1219,7 @@ static void middma_shutdown(struct pci_dev *pdev)
* @pdev: Controller PCI device structure
* @id: pci device id structure
*
- * Initilize the PCI device, map BARs, query driver data.
+ * Initialize the PCI device, map BARs, query driver data.
* Call setup_dma to complete contoller and chan initilzation
*/
static int __devinit intel_mid_dma_probe(struct pci_dev *pdev,
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index 070cea4..b9f0c20 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -873,7 +873,7 @@ ppc4xx_edac_get_mtype(u32 mcopt1)
}

/**
- * ppc4xx_edac_init_csrows - intialize driver instance rows
+ * ppc4xx_edac_init_csrows - initialize driver instance rows
* @mci: A pointer to the EDAC memory controller instance
* associated with the ibm,sdram-4xx-ddr2 controller for which
* the csrows (i.e. banks/ranks) are being initialized.
@@ -881,7 +881,7 @@ ppc4xx_edac_get_mtype(u32 mcopt1)
* currently set for the controller, from which bank width
* and memory typ information is derived.
*
- * This routine intializes the virtual "chip select rows" associated
+ * This routine initializes the virtual "chip select rows" associated
* with the EDAC memory controller instance. An ibm,sdram-4xx-ddr2
* controller bank/rank is mapped to a row.
*
@@ -992,7 +992,7 @@ ppc4xx_edac_init_csrows(struct mem_ctl_info *mci, u32 mcopt1)
}

/**
- * ppc4xx_edac_mc_init - intialize driver instance
+ * ppc4xx_edac_mc_init - initialize driver instance
* @mci: A pointer to the EDAC memory controller instance being
* initialized.
* @op: A pointer to the OpenFirmware device tree node associated
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 178942a..8a3c5cf 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -2318,7 +2318,7 @@ static int gigaset_probe(struct usb_interface *interface,
__func__, le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));

- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
cs = gigaset_initcs(driver, BAS_CHANNELS, 0, 0, cidmode,
GIGASET_MODULENAME);
if (!cs)
@@ -2576,7 +2576,7 @@ static int __init bas_gigaset_init(void)
{
int result;

- /* allocate memory for our driver state and intialize it */
+ /* allocate memory for our driver state and initialize it */
driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
GIGASET_MODULENAME, GIGASET_DEVNAME,
&gigops, THIS_MODULE);
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index d151dcb..0ef09d0 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -513,7 +513,7 @@ gigaset_tty_open(struct tty_struct *tty)
return -ENODEV;
}

- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
if (!cs)
goto error;
@@ -771,7 +771,7 @@ static int __init ser_gigaset_init(void)
return rc;
}

- /* allocate memory for our driver state and intialize it */
+ /* allocate memory for our driver state and initialize it */
driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
GIGASET_MODULENAME, GIGASET_DEVNAME,
&ops, THIS_MODULE);
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index 4a66338..5e3300d 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -695,7 +695,7 @@ static int gigaset_probe(struct usb_interface *interface,

dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);

- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
if (!cs)
return -ENODEV;
@@ -894,7 +894,7 @@ static int __init usb_gigaset_init(void)
{
int result;

- /* allocate memory for our driver state and intialize it */
+ /* allocate memory for our driver state and initialize it */
driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
GIGASET_MODULENAME, GIGASET_DEVNAME,
&ops, THIS_MODULE);
diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c
index 7918680..3e5cf27 100644
--- a/drivers/media/video/davinci/vpss.c
+++ b/drivers/media/video/davinci/vpss.c
@@ -85,7 +85,7 @@ enum vpss_platform_type {
/*
* vpss operations. Depends on platform. Not all functions are available
* on all platforms. The api, first check if a functio is available before
- * invoking it. In the probe, the function ptrs are intialized based on
+ * invoking it. In the probe, the function ptrs are initialized based on
* vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc.
*/
struct vpss_hw_ops {
diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c
index 9e3879e..fe8616a 100644
--- a/drivers/misc/arm-charlcd.c
+++ b/drivers/misc/arm-charlcd.c
@@ -313,7 +313,7 @@ static int __init charlcd_probe(struct platform_device *pdev)
INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work);
schedule_delayed_work(&lcd->init_work, 0);

- dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n",
+ dev_info(&pdev->dev, "initialized ARM character LCD at %08x\n",
lcd->phybase);

return 0;
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index e9ad16f..4a6f0ea 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -4947,7 +4947,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
memset(&ilt, 0, sizeof(struct bnx2x_ilt));

- /* initalize dummy TM client */
+ /* initialize dummy TM client */
ilt_cli.start = 0;
ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
ilt_cli.client_num = ILT_CLIENT_TM;
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 30f368d..106718c 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1916,7 +1916,7 @@ int bond_3ad_bind_slave(struct slave *slave)
return -1;
}

- //check that the slave has not been intialized yet.
+ //check that the slave has not been initialized yet.
if (SLAVE_AD_INFO(slave).port.slave != slave) {

// port initialization
diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c
index a8766fb..e13b7fe 100644
--- a/drivers/net/cxgb3/mc5.c
+++ b/drivers/net/cxgb3/mc5.c
@@ -318,7 +318,7 @@ static void mc5_dbgi_mode_disable(const struct mc5 *mc5)

/*
* Initialization that requires the OS and protocol layers to already
- * be intialized goes here.
+ * be initialized goes here.
*/
int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
unsigned int nroutes)
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 0bd8fbb..05e6b8c 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1078,7 +1078,7 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)

/*
* The defaults in the HW for RX PB 1-7 are not zero and so should be
- * intialized to zero for non DCB mode otherwise actual total RX PB
+ * initialized to zero for non DCB mode otherwise actual total RX PB
* would be bigger than programmed and filter space would run into
* the PB 0 region.
*/
@@ -1169,7 +1169,7 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)

/*
* The defaults in the HW for RX PB 1-7 are not zero and so should be
- * intialized to zero for non DCB mode otherwise actual total RX PB
+ * initialized to zero for non DCB mode otherwise actual total RX PB
* would be bigger than programmed and filter space would run into
* the PB 0 region.
*/
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 59ac770..8cde3a5 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -698,7 +698,7 @@ enum i2400m_bm_cmd_flags {
* @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
* rom after reading the MAC address. This is quite a dirty hack,
* if you ask me -- the device requires the bootrom to be
- * intialized after reading the MAC address.
+ * initialized after reading the MAC address.
*/
enum i2400m_bri {
I2400M_BRI_SOFT = 1 << 1,
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 0dc33b6..be48281 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -1919,7 +1919,7 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev)
b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL);
}

-/* Intialize B/G PHY power control */
+/* Initialize B/G PHY power control */
static void b43_phy_init_pctl(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->dev->bus;
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index 35033dd..28e477d 100644
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -153,7 +153,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev)
phy->calibrated = 1;
}

-/* intialize B PHY power control
+/* initialize B PHY power control
* as described in http://bcm-specs.sipsolutions.net/InitPowerControl
*/
static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev)
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 99d4f23..0db4827 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -1198,7 +1198,7 @@ static int __init m8xx_probe(struct platform_device *ofdev,
out_be32(M8XX_PGCRX(1),
M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));

- /* intialize the fixed memory windows */
+ /* initialize the fixed memory windows */

for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 2d61186..304333f 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -7193,7 +7193,7 @@ static struct ibm_struct volume_driver_data = {
* TPACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
*
* FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
- * boot. Apparently the EC does not intialize it, so unless ACPI DSDT
+ * boot. Apparently the EC does not initialize it, so unless ACPI DSDT
* does so, its initial value is meaningless (0x07).
*
* For firmware bugs, refer to:
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index afc9aeb..060ac4b 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -91,7 +91,7 @@ void aac_fib_map_free(struct aac_dev *dev)
* aac_fib_setup - setup the fibs
* @dev: Adapter to set up
*
- * Allocate the PCI space for the fibs, map it and then intialise the
+ * Allocate the PCI space for the fibs, map it and then initialise the
* fib area, the unmapped fib data and also the free list
*/

diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index 7437461..390168f 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -797,7 +797,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
int j;
/* Start from Page 1 of Mode 0 and 1. */
moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
- /* All the fields of page 1 can be intialized to 0. */
+ /* All the fields of page 1 can be initialized to 0. */
for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
}
@@ -938,7 +938,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
asd_write_reg_dword(asd_ha, SCBPRO, 0);
asd_write_reg_dword(asd_ha, CSEQCON, 0);

- /* Intialize CSEQ Mode 11 Interrupt Vectors.
+ /* Initialize CSEQ Mode 11 Interrupt Vectors.
* The addresses are 16 bit wide and in dword units.
* The values of their macros are in byte units.
* Thus we have to divide by 4. */
@@ -961,7 +961,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);

for (i = 0; i < 8; i++) {
- /* Intialize Mode n Link m Interrupt Enable. */
+ /* Initialize Mode n Link m Interrupt Enable. */
asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
/* Initialize Mode n Request Mailbox. */
asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index b522bf3..b7aa23a 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -5742,7 +5742,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
switch (status) {
case BFA_STATUS_OK:
/*
- * Initialiaze the V-Port fields
+ * Initialize the V-Port fields
*/
__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
vport->vport_stats.fdisc_accepts++;
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 54f50b0..31bbfb2 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3795,7 +3795,7 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
* adapter_add_device - Adds the device instance to the adaptor instance.
*
* @acb: The adapter device to be updated
- * @dcb: A newly created and intialised device instance to add.
+ * @dcb: A newly created and initialised device instance to add.
**/
static void adapter_add_device(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb)
@@ -4497,7 +4497,7 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
* init_adapter - Grab the resource for the card, setup the adapter
* information, set the card into a known state, create the various
* tables etc etc. This basically gets all adapter information all up
- * to date, intialised and gets the chip in sync with it.
+ * to date, initialised and gets the chip in sync with it.
*
* @host: This hosts adapter structure
* @io_port: The base I/O port
@@ -4788,7 +4788,7 @@ static void banner_display(void)
* that it finds in the system. The pci_dev strcuture indicates which
* instance we are being called from.
*
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
* @id: Looks like a pointer to the entry in our pci device table
* that was actually matched by the PCI subsystem.
*
@@ -4859,7 +4859,7 @@ fail:
* dc395x_remove_one - Called to remove a single instance of the
* adapter.
*
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
**/
static void __devexit dc395x_remove_one(struct pci_dev *dev)
{
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f681eea..0e4abb9 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1339,7 +1339,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
}

/**
- * lpfc_param_init - Intializes a cfg attribute
+ * lpfc_param_init - Initializes a cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index f8c86b2..b95285f 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -603,7 +603,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
#endif

intx:
- /* intialize the INT-X interrupt */
+ /* initialize the INT-X interrupt */
rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
SHOST_TO_SAS_HA(pm8001_ha->shost));
return rc;
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index d53e650..a2ed201 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -477,7 +477,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_remove_driver);


/**
- * scsi_netlink_init - Called by SCSI subsystem to intialize
+ * scsi_netlink_init - Called by SCSI subsystem to initialize
* the SCSI transport netlink interface
*
**/
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 8b955b5..4afa81a 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
*
* This routine is similar to sym_set_workarounds(), except
* that, at this point, we already know that the device was
- * successfully intialized at least once before, and so most
+ * successfully initialized at least once before, and so most
* of the steps taken there are un-needed here.
*/
static void sym2_reset_workarounds(struct pci_dev *pdev)
diff --git a/drivers/staging/stradis/stradis.c b/drivers/staging/stradis/stradis.c
index a057824..dd3874b 100644
--- a/drivers/staging/stradis/stradis.c
+++ b/drivers/staging/stradis/stradis.c
@@ -745,7 +745,7 @@ static void set_out_format(struct saa7146 *saa, int mode)
}
}

-/* Intialize bitmangler to map from a byte value to the mangled word that
+/* Initialize bitmangler to map from a byte value to the mangled word that
* must be output to program the Xilinx part through the DEBI port.
* Xilinx Data Bit->DEBI Bit: 0->15 1->7 2->6 3->12 4->11 5->2 6->1 7->0
* transfer FPGA code, init IBM chip, transfer IBM microcode
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 44f8b92..a6afd15 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -717,7 +717,7 @@ static int adu_probe(struct usb_interface *interface,
goto exit;
}

- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory\n");
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 3756641..7a10e48 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -768,7 +768,7 @@ static int iowarrior_probe(struct usb_interface *interface,
int i;
int retval = -ENOMEM;

- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory\n");
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index edffef6..eefb827 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -642,7 +642,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
int i;
int retval = -ENOMEM;

- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */

dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 5d81504..567dbe6 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1636,7 +1636,7 @@ static inline void __init musb_g_init_endpoints(struct musb *musb)
struct musb_hw_ep *hw_ep;
unsigned count = 0;

- /* intialize endpoint list just once */
+ /* initialize endpoint list just once */
INIT_LIST_HEAD(&(musb->g.ep_list));

for (epnum = 0, hw_ep = musb->endpoints;
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index a130f02..05a232e 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2871,14 +2871,14 @@ fix_extent_len:
* to an uninitialized extent.
*
* Writing to an uninitized extent may result in splitting the uninitialized
- * extent into multiple /intialized unintialized extents (up to three)
+ * extent into multiple /initialized uninitialized extents (up to three)
* There are three possibilities:
* a> There is no split required: Entire extent should be uninitialized
* b> Splits in two extents: Write is happening at either end of the extent
* c> Splits in three extents: Somone is writing in middle of the extent
*
* One of more index blocks maybe needed if the extent tree grow after
- * the unintialized extent split. To prevent ENOSPC occur at the IO
+ * the uninitialized extent split. To prevent ENOSPC occur at the IO
* complete, we need to split the uninitialized extent before DIO submit
* the IO. The uninitialized extent called at this time will be split
* into three uninitialized extent(at most). After IO complete, the part
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 670ab15..867818d 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3931,9 +3931,9 @@ retry:
* preallocated extents, and those write extend the file, no need to
* fall back to buffered IO.
*
- * For holes, we fallocate those blocks, mark them as unintialized
+ * For holes, we fallocate those blocks, mark them as uninitialized
* If those blocks were preallocated, we mark sure they are splited, but
- * still keep the range to write as unintialized.
+ * still keep the range to write as uninitialized.
*
* The unwrritten extents will be converted to written when DIO is completed.
* For async direct IO, since the IO may still pending when return, we
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index ab31ce5..0794efe 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -938,7 +938,7 @@ out_reclaim:
* Slab object creation initialisation for the XFS inode.
* This covers only the idempotent fields in the XFS inode;
* all other fields need to be initialised on allocation
- * from the slab. This avoids the need to repeatedly intialise
+ * from the slab. This avoids the need to repeatedly initialise
* fields in the xfs inode that left in the initialise state
* when freeing the inode.
*/
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 709dfb9..90a5cbf 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -560,7 +560,7 @@ struct cgroup_iter {
/*
* To iterate across the tasks in a cgroup:
*
- * 1) call cgroup_iter_start to intialize an iterator
+ * 1) call cgroup_iter_start to initialize an iterator
*
* 2) call cgroup_iter_next() to retrieve member tasks until it
* returns NULL or until you want to end the iteration
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index d7bda21..5d37d95 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -2937,7 +2937,7 @@ static void __init kdb_cmd_init(void)
}
}

-/* Intialize kdb_printf, breakpoint tables and kdb state */
+/* Initialize kdb_printf, breakpoint tables and kdb state */
void __init kdb_init(int lvl)
{
static int kdb_init_lvl = KDB_NOT_INITIALIZED;
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index c18d7ef..ddbbaf2 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -678,7 +678,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
{

- /* Intialize mult/shift and max_idle_ns */
+ /* Initialize mult/shift and max_idle_ns */
__clocksource_updatefreq_scale(cs, scale, freq);

/* Add clocksource to the clcoksource list */
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 05b1ecf..e961522 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1336,7 +1336,7 @@ static inline unsigned int tcp_cwnd_test(struct tcp_sock *tp,
return 0;
}

-/* Intialize TSO state of a skb.
+/* Initialize TSO state of a skb.
* This must be invoked the first time we consider transmitting
* SKB onto the wire.
*/
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 33122ca..6619ed8 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1614,7 +1614,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
* A module includes a number of sections that are discarded
* either when loaded or when used as built-in.
* For loaded modules all functions marked __init and all data
- * marked __initdata will be discarded when the module has been intialized.
+ * marked __initdata will be discarded when the module has been initialized.
* Likewise for modules used built-in the sections marked __exit
* are discarded because __exit marked function are supposed to be called
* only when a module is unloaded which never happens for built-in modules.
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index e7a40d1..0f81b23 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -1953,7 +1953,7 @@ static int max98088_probe(struct snd_soc_codec *codec)
return ret;
}

- /* initalize private data */
+ /* initialize private data */

max98088->sysclk = (unsigned)-1;
max98088->eq_textcnt = 0;
--
1.7.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/