Re: kernel 2.6.33.7 (the highest version with RT patch) does notwork with b44 ethernet controller

[Wojciech ZaboÅotny]

W dniu 04.11.2010 15:20, Eric Dumazet wrote:
> Could you print the Invalid MAC address ?
>
>
> diff --git a/drivers/net/b44.c b/drivers/net/b44.c
> index c6e8631..b1b9a2b 100644
> --- a/drivers/net/b44.c
> +++ b/drivers/net/b44.c
> @@ -2092,7 +2092,7 @@ static int __devinit b44_get_invariants(struct b44 *bp)
>   	memcpy(bp->dev->dev_addr, addr, 6);
>
>   	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
> -		pr_err("Invalid MAC address found in EEPROM\n");
> +		pr_err("Invalid MAC address %pM found in EEPROM\n", bp->dev->dev_addr);
>   		return -EINVAL;
>   	}
>
>
>    
After the first "rmmod b44; modprobe b44" I've got:

b44 0000:02:0e.0: PCI INT A disabled
b44 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
b44.c:v2.0
b44: Invalid MAC address 00:00:00:00:00:00 found in EEPROM
b44 ssb1:0: Problem fetching invariants of chip, aborting.
b44: probe of ssb1:0 failed with error -22

After the second "rmmod b44; modprobe b44" I've got:

b44 0000:02:0e.0: PCI INT A disabled
b44 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:00:01:00:00:10
udev[4514]: renamed network interface eth0 to eth8

I've attached my configs - both for standard and RT configurations.

Attachment: config-2.6.33.7.gz
Description: GNU Zip compressed data

Attachment: config-2.6.33.7-rt29.gz
Description: GNU Zip compressed data