Re: [PATCH] mxcmmc: Add the ability to bind a regulator to managethe MMC card voltage

[Alberto Panizzo]

On ven, 2010-11-05 at 10:28 +0100, Alberto Panizzo wrote:
> On mar, 2010-11-02 at 08:39 +0100, Sascha Hauer wrote:
> > On Tue, Nov 02, 2010 at 01:05:37AM +0100, Alberto Panizzo wrote:
> > > This implementation is based on the pxamci.c driver and it will
> > > be used to support the mx31_3ds machine.
> > > 
> > > Signed-off-by: Alberto Panizzo <maramaopercheseimorto@xxxxxxxxx>
> > 
> > Looks good to me
> > 
> > Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > 

Chris,
Please, any comment on this one?

Thanks,
Alberto!

> 
> > > ---
> > > 
> > > This patch is based on the pengutronix for-rmk branch and apply to the
> > > linus tre, version:2.6.37-rc1
> > > 
> > > ..cc the lists, sorry for the double mail.
> > > 
> > >  drivers/mmc/host/mxcmmc.c |   48 +++++++++++++++++++++++++++++++++++++++-----
> > >  1 files changed, 42 insertions(+), 6 deletions(-)
> > > 
> > > diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> > > index 350f78e..e4637fc 100644
> > > --- a/drivers/mmc/host/mxcmmc.c
> > > +++ b/drivers/mmc/host/mxcmmc.c
> > > @@ -31,6 +31,7 @@
> > >  #include <linux/clk.h>
> > >  #include <linux/io.h>
> > >  #include <linux/gpio.h>
> > > +#include <linux/regulator/consumer.h>
> > >  
> > >  #include <asm/dma.h>
> > >  #include <asm/irq.h>
> > > @@ -141,10 +142,45 @@ struct mxcmci_host {
> > >  
> > >  	struct work_struct	datawork;
> > >  	spinlock_t		lock;
> > > +
> > > +	struct regulator	*vcc;
> > >  };
> > >  
> > >  static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
> > >  
> > > +static inline void mxcmci_init_ocr(struct mxcmci_host *host)
> > > +{
> > > +#ifdef CONFIG_REGULATOR
> > > +	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
> > > +
> > > +	if (IS_ERR(host->vcc)) {
> > > +		host->vcc = NULL;
> > > +	} else {
> > > +		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
> > > +		if (host->pdata && host->pdata->ocr_avail)
> > > +			dev_warn(mmc_dev(host->mmc),
> > > +				"pdata->ocr_avail will not be used\n");
> > > +	}
> > > +#endif
> > > +	if (host->vcc == NULL) {
> > > +		/* fall-back to platform data */
> > > +		if (host->pdata && host->pdata->ocr_avail)
> > > +			host->mmc->ocr_avail = host->pdata->ocr_avail;
> > > +		else
> > > +			host->mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> > > +	}
> > > +}
> > > +
> > > +static inline void mxcmci_set_power(struct mxcmci_host *host, unsigned int vdd)
> > > +{
> > > +#ifdef CONFIG_REGULATOR
> > > +	if (host->vcc)
> > > +		mmc_regulator_set_ocr(host->vcc, vdd);
> > > +#endif
> > > +	if (host->pdata && host->pdata->setpower)
> > > +		host->pdata->setpower(mmc_dev(host->mmc), vdd);
> > > +}
> > > +
> > >  static inline int mxcmci_use_dma(struct mxcmci_host *host)
> > >  {
> > >  	return host->do_dma;
> > > @@ -680,9 +716,9 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > >  		host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
> > >  
> > >  	if (host->power_mode != ios->power_mode) {
> > > -		if (host->pdata && host->pdata->setpower)
> > > -			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
> > > +		mxcmci_set_power(host, ios->vdd);
> > >  		host->power_mode = ios->power_mode;
> > > +
> > >  		if (ios->power_mode == MMC_POWER_ON)
> > >  			host->cmdat |= CMD_DAT_CONT_INIT;
> > >  	}
> > > @@ -808,10 +844,7 @@ static int mxcmci_probe(struct platform_device *pdev)
> > >  	host->pdata = pdev->dev.platform_data;
> > >  	spin_lock_init(&host->lock);
> > >  
> > > -	if (host->pdata && host->pdata->ocr_avail)
> > > -		mmc->ocr_avail = host->pdata->ocr_avail;
> > > -	else
> > > -		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> > > +	mxcmci_init_ocr(host);
> > >  
> > >  	if (host->pdata && host->pdata->dat3_card_detect)
> > >  		host->default_irq_mask =
> > > @@ -916,6 +949,9 @@ static int mxcmci_remove(struct platform_device *pdev)
> > >  
> > >  	mmc_remove_host(mmc);
> > >  
> > > +	if (host->vcc)
> > > +		regulator_put(host->vcc);
> > > +
> > >  	if (host->pdata && host->pdata->exit)
> > >  		host->pdata->exit(&pdev->dev, mmc);
> > >  
> > > -- 
> > > 1.6.3.3
> > > 
> > > 
> > > 
> > > 
> > > 
> > 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/