Re: [PATCH v10] USB device driver of Topcliff PCH

[Joe Perches]

On Thu, 2010-11-11 at 11:13 +0900, Toshiharu Okada wrote:
> This patch adds the USB device driver of EG20T(Topcliff) PCH.

It seems several of the dev_<level> logging messages
need to be terminated with a "\n"

[]

> +static void pch_udc_csr_busy(struct pch_udc_dev *dev)
> +{
> +	unsigned int count = 200;
> +
> +	/* Wait till idle */
> +	while ((pch_udc_readl(dev, UDC_CSR_BUSY_ADDR) & UDC_CSR_BUSY)
> +		&& --count)
> +		cpu_relax();
> +	if (!count)
> +		dev_err(&dev->pdev->dev, "%s: wait error", __func__);
> +}

[]

> +static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep)
> +{
> +	unsigned int loopcnt = 0;
> +	struct pch_udc_dev *dev = ep->dev;
> +
> +	if (!(pch_udc_ep_readl(ep, UDC_EPCTL_ADDR) & UDC_EPCTL_NAK))
> +		return;
> +	if (!ep->in) {
> +		loopcnt = 10000;
> +		while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
> +			--loopcnt)
> +			udelay(5);
> +		if (!loopcnt)
> +			dev_err(&dev->pdev->dev, "%s: RxFIFO not Empty ",
> +				__func__);
> +	}
> +	loopcnt = 10000;
> +	while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_NAK) && --loopcnt) {
> +		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
> +		udelay(5);
> +	}
> +	if (!loopcnt)
> +		dev_err(&dev->pdev->dev, "%s: Clear NAK not set for ep%d%s",
> +			__func__, ep->num, (ep->in ? "in" : "out"));
> +}

etc and several more...

Can you check these and verify the need for newlines at the
end of the formats and add them as appropriate?

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/