[PATCHv4 4/4] OMAP: Serial: remove redefined MDR1 register definitions

[Emeltchenko Andrei]

From: Andrei Emeltchenko <andrei.emeltchenko@xxxxxxxxx>

Use definitions defined in serial_reg

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@xxxxxxxxx>
---
 arch/arm/plat-omap/include/plat/omap-serial.h |    3 ---
 drivers/serial/omap-serial.c                  |    6 +++---
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index c8dae02..6a17880 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -31,9 +31,6 @@
  */
 #define OMAP_SERIAL_NAME	"ttyO"
 
-#define OMAP_MDR1_DISABLE	0x07
-#define OMAP_MDR1_MODE13X	0x03
-#define OMAP_MDR1_MODE16X	0x00
 #define OMAP_MODE13X_SPEED	230400
 
 /*
diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c
index 14365f7..03a96db 100644
--- a/drivers/serial/omap-serial.c
+++ b/drivers/serial/omap-serial.c
@@ -753,7 +753,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* Protocol, Baud Rate, and Interrupt Settings */
 
-	serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
+	serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
 	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
 
 	up->efr = serial_in(up, UART_EFR);
@@ -774,9 +774,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	serial_out(up, UART_LCR, cval);
 
 	if (baud > 230400 && baud != 3000000)
-		serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X);
+		serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
 	else
-		serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
+		serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
 
 	/* Hardware Flow Control Configuration */
 
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/