Re: [BUG 2.6.27-rc1] find_busiest_group() LOCKUP

From: Wu Fengguang
Date: Sat Nov 13 2010 - 18:58:07 EST

Next message: Greg KH: "Re: [PATCH 8/19]: SCST SYSFS interface implementation"
Previous message: Alexey Charkov: "[PATCH 5/6 v3] rtc: Add support for the RTC in VIA VT8500 andcompatibles"
In reply to: Peter Zijlstra: "Re: [BUG 2.6.27-rc1] find_busiest_group() LOCKUP"
Next in thread: Yinghai Lu: "Re: [BUG 2.6.27-rc1] find_busiest_group() LOCKUP"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sun, Nov 14, 2010 at 03:12:20AM +0800, Yinghai Lu wrote:
> On 11/13/2010 05:10 AM, Wu Fengguang wrote:
> > On Sat, Nov 13, 2010 at 08:57:58PM +0800, Peter Zijlstra wrote:
> >> On Sat, 2010-11-13 at 20:00 +0800, Wu Fengguang wrote:
> >>> On Sat, Nov 13, 2010 at 06:30:24PM +0800, Peter Zijlstra wrote:
> >>>> On Sat, 2010-11-13 at 16:40 +0800, Wu Fengguang wrote:
> >>>>>> Will try and figure out how the heck that's happening, Ingo any clue?
> >>>>>
> >>>>> It's back to normal on 2.6.37-rc1 when reverting commit 50f2d7f682f9
> >>>>> ("x86, numa: Assign CPUs to nodes in round-robin manner on fake NUMA").
> >>>>>
> >>>>> The interesting part is, the commit was introduced in
> >>>>> 2.6.36-rc7..2.6.36, however 2.6.36 boots OK, while 2.6.37-rc1 panics.
> >>>>
> >>>> Argh, that commit again..
> >>>>
> >>>> Does this fix it: http://lkml.org/lkml/2010/11/12/8
> >>>
> >>> No it still panics. Here is the dmesg.
> >>
> >> OK, I'll let Nikanth have a look, if all else fails we can always
> >> revert that patch.
> >
> > It's the same bug.
> >
> > Just tried another machine, I get the same divide error. The patch
> > posted in lkml/2010/11/12/8 does not fix it. But after reverting
> > commit 50f2d7f682f9, it boots OK.
> >
> > Thanks,
> > Fengguang
> > ---
> > PS. dmesg with divide error
> >
> > [ 0.000000] console [ttyS0] enabled, bootconsole disabled
> > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> > [ 0.000000] ... MAX_LOCK_DEPTH: 48
> > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> > [ 0.000000] ... CLASSHASH_SIZE: 4096
> > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> > [ 0.000000] ... CHAINHASH_SIZE: 16384
> > [ 0.000000] memory used by lock dependency info: 6367 kB
> > [ 0.000000] per task-struct memory footprint: 2688 bytes
> > [ 0.000000] allocated 167772160 bytes of page_cgroup
> > [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> > [ 0.000000] ODEBUG: 15 of 15 active objects replaced
> > [ 0.000000] hpet clockevent registered
> > [ 0.001000] Fast TSC calibration using PIT
> > [ 0.002000] Detected 2800.469 MHz processor.
> > [ 0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.93 BogoMIPS (lpj=2800469)
> > [ 0.010818] pid_max: default: 32768 minimum: 301
> > [ 0.021745] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> > [ 0.035657] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> > [ 0.044553] Mount-cache hash table entries: 256
> > [ 0.049469] Initializing cgroup subsys debug
> > [ 0.053834] Initializing cgroup subsys ns
> > [ 0.057940] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
> > [ 0.066968] Initializing cgroup subsys cpuacct
> > [ 0.071511] Initializing cgroup subsys memory
> > [ 0.075988] Initializing cgroup subsys devices
> > [ 0.080527] Initializing cgroup subsys freezer
> > [ 0.085107] CPU: Physical Processor ID: 0
> > [ 0.089209] CPU: Processor Core ID: 0
> > [ 0.092974] mce: CPU supports 9 MCE banks
> > [ 0.097095] CPU0: Thermal monitoring enabled (TM1)
> > [ 0.101990] using mwait in idle threads.
> > [ 0.106006] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
> > [ 0.113535] ... version: 3
> > [ 0.117641] ... bit width: 48
> > [ 0.121828] ... generic registers: 4
> > [ 0.125926] ... value mask: 0000ffffffffffff
> > [ 0.131328] ... max period: 000000007fffffff
> > [ 0.136734] ... fixed-purpose events: 3
> > [ 0.140839] ... event mask: 000000070000000f
> > [ 0.147297] ACPI: Core revision 20101013
> > [ 0.175646] ftrace: allocating 24175 entries in 95 pages
> > [ 0.190912] Setting APIC routing to flat
> > [ 0.195562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> > [ 0.211643] CPU0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz stepping 01
> > [ 0.325243] lockdep: fixing up alternatives.
> > [ 0.330242] Booting Node 0, Processors #1lockdep: fixing up alternatives.
> > [ 0.430140] #2lockdep: fixing up alternatives.
> > [ 0.526962] #3lockdep: fixing up alternatives.
> > [ 0.623755] #4lockdep: fixing up alternatives.
> > [ 0.720588] Ok.
> > [ 0.722525] Booting Node 1, Processors #5lockdep: fixing up alternatives.
> > [ 0.822389] Ok.
> > [ 0.824327] Booting Node 0, Processors #6
> > [ 0.919089] TSC synchronization [CPU#0 -> CPU#6]:
> > [ 0.924155] Measured 296 cycles TSC warp between CPUs, turning off TSC clock.
> > [ 0.003999] Marking TSC unstable due to check_tsc_sync_source failed
> > [ 0.557048] lockdep: fixing up alternatives.
> > [ 0.558041] Ok.
> > [ 0.559004] Booting Node 1, Processors #7 Ok.
> > [ 0.632157] Brought up 8 CPUs
> > [ 0.633006] Total of 8 processors activated (44799.46 BogoMIPS).
>
> assume that when you have
> CONFIG_NR_CPUS=16
> instead of
> CONFIG_NR_CPUS=8
>
> it will boot ok?

No. But it boots OK with CONFIG_NR_CPUS=64: it actually has 24 CPUs, a bit more
than your expectation :)

This also boots the other 16 CPU box that used to lockup in find_busiest_group().

Hope it helps debugging the bug.

Thanks,
Fengguang
---

boot log with CONFIG_NR_CPUS=64

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.37-rc1 (wfg@bee) (gcc version 4.5.0 (GCC) ) #114 SMP PREEMPT Sun Nov 14 07:21:17 CST 2010
[ 0.000000] Command line: ip=::::wfg-ws02::dhcp netconsole=@:/eth0,6666@xxxxxxxxxxxxx/00:30:48:fe:19:94 panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=tty0 console=ttyS0,115200 earlyprintk=vga sched_debug nfsroot=10.239.51.240:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf30b000 (usable)
[ 0.000000] BIOS-e820: 00000000bf30b000 - 00000000bf38b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf38b000 - 00000000bf3a1000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf3a1000 - 00000000bf3a2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3a2000 - 00000000bf3b3000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf3b3000 - 00000000bf3b6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3b6000 - 00000000bf3dd000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf3dd000 - 00000000bf3de000 (usable)
[ 0.000000] BIOS-e820: 00000000bf3de000 - 00000000bf3df000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3df000 - 00000000bf414000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf414000 - 00000000bf416000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf416000 - 00000000bf418000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf418000 - 00000000bf420000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf420000 - 00000000bf421000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf421000 - 00000000bf423000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf423000 - 00000000bf42b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf42b000 - 00000000bf454000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf454000 - 00000000bf657000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf657000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
[ 0.000000] bootconsole [earlyvga0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: X8DTN/X8DTN, BIOS 4.6.3 01/06/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FC00000000 write-back
[ 0.000000] 1 base 0400000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcf20] fcf20
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 4k
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fa00000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000
[ 0.000000] 0100000000 - 0440000000 page 4k
[ 0.000000] kernel direct mapping tables up to 440000000 @ bd0f9000-bf30b000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 A M I)
[ 0.000000] ACPI: XSDT 00000000bf421e18 0008C (v01 A M I ALASKA 01072009 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000bf41fd98 000F4 (v04 A M I ALASKA 01072009 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF420F40/0x00000000BF420E40, using 32 (20101013/tbfadt-486)
[ 0.000000] ACPI: DSDT 00000000bf418018 06059 (v01 A M I ALASKA 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf420f40 00040
[ 0.000000] ACPI: APIC 00000000bf41fc18 00130 (v02 A M I ALASKA 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000bf415798 006EE (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000bf422f18 0003C (v01 A M I OEMMCFG 01072009 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000bf414c98 00228 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
[ 0.000000] ACPI: SLIT 00000000bf422e98 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
[ 0.000000] ACPI: HPET 00000000bf422e18 00038 (v01 A M I ICH7HPET 01072009 AMI. 00000003)
[ 0.000000] ACPI: SPMI 00000000bf422d98 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
[ 0.000000] ACPI: EINJ 00000000bf41fa98 00130 (v01 AMI AMI EINJ 00000000 00000000)
[ 0.000000] ACPI: ERST 00000000bf414a18 00210 (v01 AMIER AMI ERST 00000000 00000000)
[ 0.000000] ACPI: HEST 00000000bf414f18 000A8 (v01 AMI AMI HEST 00000000 00000000)
[ 0.000000] ACPI: BERT 00000000bf422d18 00030 (v01 AMI AMI BERT 00000000 00000000)
[ 0.000000] ACPI: DMAR 00000000bf415f18 000D4 (v01 A M I OEMDMAR 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-240000000
[ 0.000000] SRAT: Node 1 PXM 1 240000000-440000000
[ 0.000000] SRAT: Node 0 [0,c0000000) + [100000000,240000000) -> [0,240000000)
[ 0.000000] NUMA: Using 30 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff]
[ 0.000000] Initmem setup node 1 0000000240000000-0000000440000000
[ 0.000000] NODE_DATA [000000043fffa000 - 000000043fffefff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0
[ 0.000000] [ffffea0007e00000-ffffea000edfffff] PMD -> [ffff880437e00000-ffff88043edfffff] on node 1
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00440000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000bf30b
[ 0.000000] 0: 0x000bf3dd -> 0x000bf3de
[ 0.000000] 0: 0x000bf657 -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] 1: 0x00240000 -> 0x00440000
[ 0.000000] On node 0 totalpages: 2094145
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765165 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 2097152
[ 0.000000] Normal zone: 28672 pages used for memmap
[ 0.000000] Normal zone: 2068480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec90000] gsi_base[72])
[ 0.000000] IOAPIC[3]: apic_id 4, version 32, address 0xfec90000, GSI 72-95
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 24 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 112
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 475 pages/cpu @ffff8800bb800000 s1915520 r8192 d21888 u2097152
[ 0.000000] pcpu-alloc: s1915520 r8192 d21888 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 12 [0] 13
[ 0.000000] pcpu-alloc: [0] 14 [0] 15 [0] 16 [0] 17 [1] 06 [1] 07 [1] 08 [1] 09
[ 0.000000] pcpu-alloc: [1] 10 [1] 11 [1] 18 [1] 19 [1] 20 [1] 21 [1] 22 [1] 23
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4130363
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ip=::::wfg-ws02::dhcp netconsole=@:/eth0,6666@xxxxxxxxxxxxx/00:30:48:fe:19:94 panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=tty0 console=ttyS0,115200 earlyprintk=vga sched_debug nfsroot=10.239.51.240:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 16355432k/17825792k available (9918k kernel code, 1060604k absent, 409756k reserved, 10845k data, 2720k init)
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /home/wfg/cc/linux-2.6/kernel/lockdep.c:2481 lockdep_trace_alloc+0xed/0x100()
[ 0.000000] Hardware name: X8DTN
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.37-rc1 #114
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff810bc4fd>] warn_slowpath_common+0xad/0xf0
[ 0.000000] [<ffffffff810bc55a>] warn_slowpath_null+0x1a/0x20
[ 0.000000] [<ffffffff8110de8d>] lockdep_trace_alloc+0xed/0x100
[ 0.000000] [<ffffffff81201d70>] __kmalloc_node+0x30/0x340
[ 0.000000] [<ffffffff8110abc8>] ? lock_release_holdtime+0xb8/0x160
[ 0.000000] [<ffffffff811d0ada>] pcpu_mem_alloc+0x16a/0x1b0
[ 0.000000] [<ffffffff82642ba1>] percpu_init_late+0x48/0xc2
[ 0.000000] [<ffffffff8261dd2f>] start_kernel+0x1d4/0x473
[ 0.000000] [<ffffffff8261d35c>] x86_64_start_reservations+0x163/0x167
[ 0.000000] [<ffffffff8261d498>] x86_64_start_kernel+0x138/0x147
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:2096 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] allocated 167772160 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ODEBUG: 31 of 31 active objects replaced
[ 0.000000] hpet clockevent registered
[ 0.001000] Fast TSC calibration using PIT
[ 0.002000] Detected 2800.178 MHz processor.
[ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.35 BogoMIPS (lpj=2800178)
[ 0.010836] pid_max: default: 32768 minimum: 301
[ 0.021803] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035706] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.044621] Mount-cache hash table entries: 256
[ 0.049552] Initializing cgroup subsys debug
[ 0.053921] Initializing cgroup subsys ns
[ 0.058025] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.067055] Initializing cgroup subsys cpuacct
[ 0.071607] Initializing cgroup subsys memory
[ 0.076095] Initializing cgroup subsys devices
[ 0.080641] Initializing cgroup subsys freezer
[ 0.085226] CPU: Physical Processor ID: 0
[ 0.089330] CPU: Processor Core ID: 0
[ 0.093098] mce: CPU supports 9 MCE banks
[ 0.097217] CPU0: Thermal monitoring enabled (TM1)
[ 0.102119] using mwait in idle threads.
[ 0.106136] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.113674] ... version: 3
[ 0.117779] ... bit width: 48
[ 0.121974] ... generic registers: 4
[ 0.126083] ... value mask: 0000ffffffffffff
[ 0.131492] ... max period: 000000007fffffff
[ 0.136898] ... fixed-purpose events: 3
[ 0.141005] ... event mask: 000000070000000f
[ 0.147471] ACPI: Core revision 20101013
[ 0.176380] ftrace: allocating 24175 entries in 95 pages
[ 0.191595] Setting APIC routing to physical flat
[ 0.197035] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.213111] CPU0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz stepping 01
[ 0.327225] lockdep: fixing up alternatives.
[ 0.332222] Booting Node 0, Processors #1lockdep: fixing up alternatives.
[ 0.432127] #2lockdep: fixing up alternatives.
[ 0.528955] #3lockdep: fixing up alternatives.
[ 0.625744] #4lockdep: fixing up alternatives.
[ 0.722551] #5lockdep: fixing up alternatives.
[ 0.819386] Ok.
[ 0.821322] Booting Node 1, Processors #6
[ 0.916109] TSC synchronization [CPU#0 -> CPU#6]:
[ 0.921179] Measured 294 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.003999] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.556037] lockdep: fixing up alternatives.
[ 0.557042] #7lockdep: fixing up alternatives.
[ 0.632045] #8lockdep: fixing up alternatives.
[ 0.707047] #9lockdep: fixing up alternatives.
[ 0.782052] #10lockdep: fixing up alternatives.
[ 0.858049] #11lockdep: fixing up alternatives.
[ 0.933058] Ok.
[ 0.934006] Booting Node 0, Processors #12lockdep: fixing up alternatives.
[ 1.009056] #13lockdep: fixing up alternatives.
[ 1.085067] #14lockdep: fixing up alternatives.
[ 1.161064] #15lockdep: fixing up alternatives.
[ 1.237058] #16lockdep: fixing up alternatives.
[ 1.313056] #17lockdep: fixing up alternatives.
[ 1.389041] Ok.
[ 1.390004] Booting Node 1, Processors #18lockdep: fixing up alternatives.
[ 1.465080] #19lockdep: fixing up alternatives.
[ 1.541043] #20lockdep: fixing up alternatives.
[ 1.617058] #21lockdep: fixing up alternatives.
[ 1.693041] #22lockdep: fixing up alternatives.
[ 1.769061] #23 Ok.
[ 1.841195] Brought up 24 CPUs
[ 1.842006] Total of 24 processors activated (134396.94 BogoMIPS).
[ 1.843047] Testing NMI watchdog ... OK.
[ 1.865212] CPU0 attaching sched-domain:
[ 1.866005] domain 0: span 0,12 level SIBLING
[ 1.868003] groups: 0 (cpu_power = 589) 12 (cpu_power = 589)
[ 1.871308] domain 1: span 0-5,12-17 level MC
[ 1.873016] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178)
[ 1.884278] domain 2: span 0-23 level NODE
[ 1.886031] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 1.892056] CPU1 attaching sched-domain:
[ 1.893004] domain 0: span 1,13 level SIBLING
[ 1.895003] groups: 1 (cpu_power = 589) 13 (cpu_power = 589)
[ 1.901044] domain 1: span 0-5,12-17 level MC
[ 1.903004] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178)
[ 1.912279] domain 2: span 0-23 level NODE
[ 1.914004] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 1.920005] CPU2 attaching sched-domain:
[ 1.921004] domain 0: span 2,14 level SIBLING
[ 1.923003] groups: 2 (cpu_power = 589) 14 (cpu_power = 589)
[ 1.929039] domain 1: span 0-5,12-17 level MC
[ 1.931003] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178)
[ 1.940278] domain 2: span 0-23 level NODE
[ 1.942005] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 1.948005] CPU3 attaching sched-domain:
[ 1.949004] domain 0: span 3,15 level SIBLING
[ 1.951003] groups: 3 (cpu_power = 589) 15 (cpu_power = 589)
[ 1.957029] domain 1: span 0-5,12-17 level MC
[ 1.959003] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178)
[ 1.968286] domain 2: span 0-23 level NODE
[ 1.970003] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 1.976006] CPU4 attaching sched-domain:
[ 1.977004] domain 0: span 4,16 level SIBLING
[ 1.979003] groups: 4 (cpu_power = 589) 16 (cpu_power = 589)
[ 1.984042] domain 1: span 0-5,12-17 level MC
[ 1.986003] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178)
[ 1.995278] domain 2: span 0-23 level NODE
[ 1.997003] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 2.003005] CPU5 attaching sched-domain:
[ 2.004004] domain 0: span 5,17 level SIBLING
[ 2.006003] groups: 5 (cpu_power = 589) 17 (cpu_power = 589)
[ 2.012042] domain 1: span 0-5,12-17 level MC
[ 2.014003] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178)
[ 2.023278] domain 2: span 0-23 level NODE
[ 2.025004] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 2.031005] CPU6 attaching sched-domain:
[ 2.032004] domain 0: span 6,18 level SIBLING
[ 2.034003] groups: 6 (cpu_power = 589) 18 (cpu_power = 589)
[ 2.039041] domain 1: span 6-11,18-23 level MC
[ 2.041004] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178)
[ 2.051280] domain 2: span 0-23 level NODE
[ 2.053003] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.058290] CPU7 attaching sched-domain:
[ 2.059004] domain 0: span 7,19 level SIBLING
[ 2.061004] groups: 7 (cpu_power = 589) 19 (cpu_power = 589)
[ 2.066004] domain 1: span 6-11,18-23 level MC
[ 2.068004] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178)
[ 2.077286] domain 2: span 0-23 level NODE
[ 2.079003] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.084321] CPU8 attaching sched-domain:
[ 2.085005] domain 0: span 8,20 level SIBLING
[ 2.087005] groups: 8 (cpu_power = 589) 20 (cpu_power = 589)
[ 2.091005] domain 1: span 6-11,18-23 level MC
[ 2.093004] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178)
[ 2.102280] domain 2: span 0-23 level NODE
[ 2.104003] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.109310] CPU9 attaching sched-domain:
[ 2.110004] domain 0: span 9,21 level SIBLING
[ 2.112030] groups: 9 (cpu_power = 589) 21 (cpu_power = 589)
[ 2.115327] domain 1: span 6-11,18-23 level MC
[ 2.117004] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178)
[ 2.128009] domain 2: span 0-23 level NODE
[ 2.130004] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.136289] CPU10 attaching sched-domain:
[ 2.137004] domain 0: span 10,22 level SIBLING
[ 2.139004] groups: 10 (cpu_power = 589) 22 (cpu_power = 589)
[ 2.142285] domain 1: span 6-11,18-23 level MC
[ 2.144003] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178)
[ 2.154281] domain 2: span 0-23 level NODE
[ 2.156039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.162007] CPU11 attaching sched-domain:
[ 2.163004] domain 0: span 11,23 level SIBLING
[ 2.165005] groups: 11 (cpu_power = 589) 23 (cpu_power = 589)
[ 2.168321] domain 1: span 6-11,18-23 level MC
[ 2.170003] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178)
[ 2.182004] domain 2: span 0-23 level NODE
[ 2.184004] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.189288] CPU12 attaching sched-domain:
[ 2.190005] domain 0: span 0,12 level SIBLING
[ 2.192004] groups: 12 (cpu_power = 589) 0 (cpu_power = 589)
[ 2.195283] domain 1: span 0-5,12-17 level MC
[ 2.197003] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178)
[ 2.209035] domain 2: span 0-23 level NODE
[ 2.211003] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 2.216283] CPU13 attaching sched-domain:
[ 2.217004] domain 0: span 1,13 level SIBLING
[ 2.219004] groups: 13 (cpu_power = 589) 1 (cpu_power = 589)
[ 2.222283] domain 1: span 0-5,12-17 level MC
[ 2.224010] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178)
[ 2.233283] domain 2: span 0-23 level NODE
[ 2.235004] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 2.240324] CPU14 attaching sched-domain:
[ 2.241005] domain 0: span 2,14 level SIBLING
[ 2.243005] groups: 14 (cpu_power = 589) 2 (cpu_power = 589)
[ 2.246312] domain 1: span 0-5,12-17 level MC
[ 2.248011] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178)
[ 2.257287] domain 2: span 0-23 level NODE
[ 2.259004] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 2.264323] CPU15 attaching sched-domain:
[ 2.265004] domain 0: span 3,15 level SIBLING
[ 2.267016] groups: 15 (cpu_power = 589) 3 (cpu_power = 589)
[ 2.270320] domain 1: span 0-5,12-17 level MC
[ 2.272036] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178)
[ 2.281279] domain 2: span 0-23 level NODE
[ 2.283003] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 2.288304] CPU16 attaching sched-domain:
[ 2.289004] domain 0: span 4,16 level SIBLING
[ 2.291024] groups: 16 (cpu_power = 589) 4 (cpu_power = 589)
[ 2.294285] domain 1: span 0-5,12-17 level MC
[ 2.296004] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178)
[ 2.306278] domain 2: span 0-23 level NODE
[ 2.308003] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 2.314006] CPU17 attaching sched-domain:
[ 2.315004] domain 0: span 5,17 level SIBLING
[ 2.317004] groups: 17 (cpu_power = 589) 5 (cpu_power = 589)
[ 2.321004] domain 1: span 0-5,12-17 level MC
[ 2.323004] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178)
[ 2.333278] domain 2: span 0-23 level NODE
[ 2.335003] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068)
[ 2.341007] CPU18 attaching sched-domain:
[ 2.342004] domain 0: span 6,18 level SIBLING
[ 2.344004] groups: 18 (cpu_power = 589) 6 (cpu_power = 589)
[ 2.348279] domain 1: span 6-11,18-23 level MC
[ 2.350005] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178)
[ 2.360280] domain 2: span 0-23 level NODE
[ 2.362035] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.368007] CPU19 attaching sched-domain:
[ 2.369004] domain 0: span 7,19 level SIBLING
[ 2.371004] groups: 19 (cpu_power = 589) 7 (cpu_power = 589)
[ 2.375005] domain 1: span 6-11,18-23 level MC
[ 2.377005] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178)
[ 2.386280] domain 2: span 0-23 level NODE
[ 2.388003] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.393281] CPU20 attaching sched-domain:
[ 2.394004] domain 0: span 8,20 level SIBLING
[ 2.396004] groups: 20 (cpu_power = 589) 8 (cpu_power = 589)
[ 2.399321] domain 1: span 6-11,18-23 level MC
[ 2.401003] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178)
[ 2.412005] domain 2: span 0-23 level NODE
[ 2.414005] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.419289] CPU21 attaching sched-domain:
[ 2.420005] domain 0: span 9,21 level SIBLING
[ 2.422003] groups: 21 (cpu_power = 589) 9 (cpu_power = 589)
[ 2.425285] domain 1: span 6-11,18-23 level MC
[ 2.427004] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178)
[ 2.439281] domain 2: span 0-23 level NODE
[ 2.441004] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.446290] CPU22 attaching sched-domain:
[ 2.447035] domain 0: span 10,22 level SIBLING
[ 2.449003] groups: 22 (cpu_power = 589) 10 (cpu_power = 589)
[ 2.455039] domain 1: span 6-11,18-23 level MC
[ 2.457005] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178)
[ 2.467279] domain 2: span 0-23 level NODE
[ 2.469003] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.474333] CPU23 attaching sched-domain:
[ 2.475004] domain 0: span 11,23 level SIBLING
[ 2.477003] groups: 23 (cpu_power = 589) 11 (cpu_power = 589)
[ 2.480281] domain 1: span 6-11,18-23 level MC
[ 2.482003] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178)
[ 2.494004] domain 2: span 0-23 level NODE
[ 2.496004] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068)
[ 2.503103] kworker/u:0 used greatest stack depth: 6256 bytes left
[ 2.509663] kworker/u:0 used greatest stack depth: 6184 bytes left
[ 2.542676] Time: 7:24:04 Date: 11/14/10
[ 2.547091] NET: Registered protocol family 16
[ 2.554136] ACPI: bus type pci registered
[ 2.559189] dca service started, version 1.12.1
[ 2.564137] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 2.573008] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 2.674777] PCI: Using configuration type 1 for base access
[ 2.751174] ACPI: EC: Look up EC in DSDT
[ 2.757663] \_SB_:_OSC evaluation returned wrong type
[ 2.762004] _OSC request data:1 6
[ 2.771347] ACPI: Executed 1 blocks of module-level executable AML code
[ 2.818630] ACPI: SSDT 00000000bf416018 01494 (v01 AMI IST 00000001 MSFT 03000001)
[ 2.834125] ACPI: Dynamic OEM Table Load:
[ 2.838286] ACPI: SSDT (null) 01494 (v01 AMI IST 00000001 MSFT 03000001)
[ 2.867908] ACPI: Interpreter enabled
[ 2.871006] ACPI: (supports S0 S5)
[ 2.875010] ACPI: Using IOAPIC for interrupt routing
[ 2.890103] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 2.952329] ACPI: No dock devices found.
[ 2.956007] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.966583] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.973364] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 2.980008] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 2.987008] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 2.994010] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 3.002029] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600
[ 3.008064] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 3.014009] pci 0000:00:00.0: PME# disabled
[ 3.018029] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[ 3.024072] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 3.031007] pci 0000:00:01.0: PME# disabled
[ 3.035034] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[ 3.041062] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 3.047007] pci 0000:00:03.0: PME# disabled
[ 3.052030] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604
[ 3.058060] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 3.064008] pci 0000:00:05.0: PME# disabled
[ 3.068034] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[ 3.074062] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 3.081029] pci 0000:00:07.0: PME# disabled
[ 3.085029] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604
[ 3.091060] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 3.097006] pci 0000:00:09.0: PME# disabled
[ 3.102108] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800
[ 3.108017] pci 0000:00:13.0: reg 10: [mem 0xfbe24000-0xfbe24fff]
[ 3.114058] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 3.120006] pci 0000:00:13.0: PME# disabled
[ 3.125028] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[ 3.131157] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[ 3.137081] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[ 3.143081] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
[ 3.149077] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880
[ 3.155019] pci 0000:00:16.0: reg 10: [mem 0xfbe1c000-0xfbe1ffff 64bit]
[ 3.162084] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880
[ 3.168019] pci 0000:00:16.1: reg 10: [mem 0xfbe18000-0xfbe1bfff 64bit]
[ 3.175081] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880
[ 3.181018] pci 0000:00:16.2: reg 10: [mem 0xfbe14000-0xfbe17fff 64bit]
[ 3.188135] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880
[ 3.194019] pci 0000:00:16.3: reg 10: [mem 0xfbe10000-0xfbe13fff 64bit]
[ 3.201116] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880
[ 3.207018] pci 0000:00:16.4: reg 10: [mem 0xfbe0c000-0xfbe0ffff 64bit]
[ 3.214113] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880
[ 3.220019] pci 0000:00:16.5: reg 10: [mem 0xfbe08000-0xfbe0bfff 64bit]
[ 3.227107] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880
[ 3.233018] pci 0000:00:16.6: reg 10: [mem 0xfbe04000-0xfbe07fff 64bit]
[ 3.240114] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880
[ 3.246020] pci 0000:00:16.7: reg 10: [mem 0xfbe00000-0xfbe03fff 64bit]
[ 3.253125] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 3.259055] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df]
[ 3.264065] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 3.270054] pci 0000:00:1a.2: reg 20: [io 0xf0a0-0xf0bf]
[ 3.276070] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 3.282028] pci 0000:00:1a.7: reg 10: [mem 0xfbe23000-0xfbe233ff]
[ 3.288090] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 3.295008] pci 0000:00:1a.7: PME# disabled
[ 3.299033] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 3.305072] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 3.311007] pci 0000:00:1c.0: PME# disabled
[ 3.315031] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 3.321079] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 3.328008] pci 0000:00:1c.4: PME# disabled
[ 3.332038] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 3.338054] pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f]
[ 3.344059] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 3.350054] pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f]
[ 3.355063] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 3.361053] pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f]
[ 3.367069] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 3.373028] pci 0000:00:1d.7: reg 10: [mem 0xfbe22000-0xfbe223ff]
[ 3.379089] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 3.386045] pci 0000:00:1d.7: PME# disabled
[ 3.390032] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 3.396075] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 3.402093] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 3.410007] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 3.418008] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff)
[ 3.425007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 3.433006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f)
[ 3.441006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
[ 3.449092] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
[ 3.455026] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
[ 3.460012] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
[ 3.466013] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
[ 3.471012] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
[ 3.477013] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 3.482013] pci 0000:00:1f.2: reg 24: [mem 0xfbe21000-0xfbe217ff]
[ 3.489085] pci 0000:00:1f.2: PME# supported from D3hot
[ 3.494007] pci 0000:00:1f.2: PME# disabled
[ 3.498026] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 3.504021] pci 0000:00:1f.3: reg 10: [mem 0xfbe20000-0xfbe200ff 64bit]
[ 3.511028] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 3.517145] pci 0000:01:00.0: [8086:10c9] type 0 class 0x000200
[ 3.524017] pci 0000:01:00.0: reg 10: [mem 0xfbaa0000-0xfbabffff]
[ 3.531040] pci 0000:01:00.0: reg 14: [mem 0xfba80000-0xfba9ffff]
[ 3.537014] pci 0000:01:00.0: reg 18: [io 0xe020-0xe03f]
[ 3.542013] pci 0000:01:00.0: reg 1c: [mem 0xfbb44000-0xfbb47fff]
[ 3.549069] pci 0000:01:00.0: reg 30: [mem 0xfba60000-0xfba7ffff pref]
[ 3.555039] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 3.562051] pci 0000:01:00.0: PME# disabled
[ 3.566048] pci 0000:01:00.1: [8086:10c9] type 0 class 0x000200
[ 3.572018] pci 0000:01:00.1: reg 10: [mem 0xfba40000-0xfba5ffff]
[ 3.578014] pci 0000:01:00.1: reg 14: [mem 0xfba20000-0xfba3ffff]
[ 3.584013] pci 0000:01:00.1: reg 18: [io 0xe000-0xe01f]
[ 3.590014] pci 0000:01:00.1: reg 1c: [mem 0xfbb40000-0xfbb43fff]
[ 3.596032] pci 0000:01:00.1: reg 30: [mem 0xfba00000-0xfba1ffff pref]
[ 3.603039] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 3.609007] pci 0000:01:00.1: PME# disabled
[ 3.613022] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 3.619007] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 3.625007] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff]
[ 3.632009] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 3.640050] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 3.646019] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 3.653007] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 3.661008] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 3.669049] pci 0000:00:05.0: PCI bridge to [bus 04-04]
[ 3.674006] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
[ 3.682060] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 3.690052] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 3.698050] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 3.703006] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
[ 3.711016] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 3.718007] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 3.727063] pci 0000:06:00.0: [8086:0329] type 1 class 0x000604
[ 3.733023] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled
[ 3.740061] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 3.746006] pci 0000:06:00.0: PME# disabled
[ 3.750027] pci 0000:06:00.2: [8086:032a] type 1 class 0x000604
[ 3.757023] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled
[ 3.764087] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold
[ 3.770007] pci 0000:06:00.2: PME# disabled
[ 3.774023] pci 0000:00:09.0: PCI bridge to [bus 06-08]
[ 3.780008] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 3.786006] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff]
[ 3.793008] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 3.801080] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[ 3.807013] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled)
[ 3.814008] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 3.822008] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 3.830060] pci 0000:08:01.0: [8086:1229] type 0 class 0x000200
[ 3.836022] pci 0000:08:01.0: reg 10: [mem 0xfb900000-0xfb900fff]
[ 3.842015] pci 0000:08:01.0: reg 14: [io 0xd000-0xd03f]
[ 3.848015] pci 0000:08:01.0: reg 18: [mem 0xfb800000-0xfb8fffff]
[ 3.854042] pci 0000:08:01.0: reg 30: [mem 0xfb700000-0xfb7fffff pref]
[ 3.861024] pci 0000:08:01.0: supports D1 D2
[ 3.865005] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.872008] pci 0000:08:01.0: PME# disabled
[ 3.876054] pci 0000:06:00.2: PCI bridge to [bus 08-08]
[ 3.882008] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff]
[ 3.888007] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff]
[ 3.895009] pci 0000:06:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 3.903081] pci 0000:09:00.0: [1000:0058] type 0 class 0x000100
[ 3.909020] pci 0000:09:00.0: reg 10: [io 0xc000-0xc0ff]
[ 3.915021] pci 0000:09:00.0: reg 14: [mem 0xfb610000-0xfb613fff 64bit]
[ 3.922022] pci 0000:09:00.0: reg 1c: [mem 0xfb600000-0xfb60ffff 64bit]
[ 3.928026] pci 0000:09:00.0: reg 30: [mem 0xfb400000-0xfb5fffff pref]
[ 3.935039] pci 0000:09:00.0: supports D1 D2
[ 3.939022] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
[ 3.945007] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 3.951007] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff]
[ 3.958009] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 3.966077] pci 0000:0a:00.0: [197b:2368] type 0 class 0x000101
[ 3.972025] pci 0000:0a:00.0: reg 10: [io 0xb040-0xb047]
[ 3.978019] pci 0000:0a:00.0: reg 14: [io 0xb030-0xb033]
[ 3.983018] pci 0000:0a:00.0: reg 18: [io 0xb020-0xb027]
[ 3.989019] pci 0000:0a:00.0: reg 1c: [io 0xb010-0xb013]
[ 3.994019] pci 0000:0a:00.0: reg 20: [io 0xb000-0xb00f]
[ 4.000032] pci 0000:0a:00.0: reg 30: [mem 0xfbd00000-0xfbd0ffff pref]
[ 4.006086] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
[ 4.012007] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 4.018008] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 4.025010] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 4.033050] pci 0000:0b:01.0: [1002:515e] type 0 class 0x000300
[ 4.039023] pci 0000:0b:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 4.046014] pci 0000:0b:01.0: reg 14: [io 0xa000-0xa0ff]
[ 4.052084] pci 0000:0b:01.0: reg 18: [mem 0xfbc20000-0xfbc2ffff]
[ 4.058043] pci 0000:0b:01.0: reg 30: [mem 0xfbc00000-0xfbc1ffff pref]
[ 4.065091] pci 0000:0b:01.0: supports D1 D2
[ 4.069057] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
[ 4.076006] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 4.082006] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 4.089009] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 4.097006] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 4.105007] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 4.113005] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 4.122006] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 4.131046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 4.139137] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 4.146096] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 4.152191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 4.159260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
[ 4.166198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT]
[ 4.173307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT]
[ 4.267232] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.275134] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.283108] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.290600] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 4.298509] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 4.306461] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 4.314472] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 4.322465] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.331171] vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 4.339006] vgaarb: loaded
[ 4.343159] usbcore: registered new interface driver usbfs
[ 4.349078] usbcore: registered new interface driver hub
[ 4.355154] usbcore: registered new device driver usb
[ 4.363177] wmi: Mapper loaded
[ 4.366073] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 4.373013] PCI: Using ACPI for IRQ routing
[ 4.377007] PCI: pci_cache_line_size set to 64 bytes
[ 4.382255] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[ 4.389012] reserve RAM buffer: 00000000bf30b000 - 00000000bfffffff
[ 4.395020] reserve RAM buffer: 00000000bf3de000 - 00000000bfffffff
[ 4.402017] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 4.409132] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 4.415291] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 4.423012] Switching to clocksource hpet
[ 4.428481] Warning: could not register all branches stats
[ 4.434091] Warning: could not register annotated branches stats
[ 4.475533] pnp: PnP ACPI init
[ 4.478730] ACPI: bus type pnp registered
[ 4.483091] pnp 00:00: [bus 00-ff]
[ 4.486603] pnp 00:00: [io 0x0cf8-0x0cff]
[ 4.490804] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 4.495605] pnp 00:00: [io 0x0d00-0xffff window]
[ 4.500406] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 4.505903] pnp 00:00: [mem 0x00000000 window]
[ 4.510451] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 4.516463] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 4.523884] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[ 4.528777] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[ 4.533671] pnp 00:01: [mem 0xfe000000-0xfe9fffff]
[ 4.538569] pnp 00:01: [mem 0xfea00000-0xfea0001f]
[ 4.543466] pnp 00:01: [mem 0xfeb00000-0xfebfffff]
[ 4.548360] pnp 00:01: [mem 0xfed00400-0xfed3ffff]
[ 4.553252] pnp 00:01: [mem 0xfed45000-0xfedfffff]
[ 4.558649] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 4.565965] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 4.571992] pnp 00:02: [io 0x0290-0x029f]
[ 4.576198] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 4.582224] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 4.588249] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 4.594817] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.601551] pnp 00:03: [io 0x0060]
[ 4.605145] pnp 00:03: [io 0x0064]
[ 4.608742] pnp 00:03: [irq 1]
[ 4.612268] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 4.619803] pnp 00:04: [irq 12]
[ 4.623350] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 4.635327] pnp 00:05: [io 0x03f8-0x03ff]
[ 4.641123] pnp 00:05: [irq 4]
[ 4.644302] pnp 00:05: [dma 0 disabled]
[ 4.648794] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 4.658238] pnp 00:06: [io 0x02f8-0x02ff]
[ 4.662450] pnp 00:06: [irq 3]
[ 4.665603] pnp 00:06: [dma 0 disabled]
[ 4.670108] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 4.678129] pnp 00:07: [dma 4]
[ 4.681292] pnp 00:07: [io 0x0000-0x000f]
[ 4.685496] pnp 00:07: [io 0x0081-0x0083]
[ 4.689701] pnp 00:07: [io 0x0087]
[ 4.693295] pnp 00:07: [io 0x0089-0x008b]
[ 4.697498] pnp 00:07: [io 0x008f]
[ 4.701085] pnp 00:07: [io 0x00c0-0x00df]
[ 4.705685] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[ 4.712348] pnp 00:08: [io 0x0070-0x0071]
[ 4.716553] pnp 00:08: [irq 8]
[ 4.720144] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 4.726807] pnp 00:09: [io 0x0061]
[ 4.730732] kworker/u:0 used greatest stack depth: 5352 bytes left
[ 4.730785] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
[ 4.730885] pnp 00:0a: [io 0x0010-0x001f]
[ 4.730888] pnp 00:0a: [io 0x0022-0x003f]
[ 4.730893] pnp 00:0a: [io 0x0044-0x005f]
[ 4.730896] pnp 00:0a: [io 0x0062-0x0063]
[ 4.730900] pnp 00:0a: [io 0x0065-0x006f]
[ 4.730904] pnp 00:0a: [io 0x0072-0x007f]
[ 4.730908] pnp 00:0a: [io 0x0080]
[ 4.730911] pnp 00:0a: [io 0x0084-0x0086]
[ 4.730915] pnp 00:0a: [io 0x0088]
[ 4.730919] pnp 00:0a: [io 0x008c-0x008e]
[ 4.730922] pnp 00:0a: [io 0x0090-0x009f]
[ 4.730926] pnp 00:0a: [io 0x00a2-0x00bf]
[ 4.730929] pnp 00:0a: [io 0x00e0-0x00ef]
[ 4.730934] pnp 00:0a: [io 0x04d0-0x04d1]
[ 4.731781] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.731835] pnp 00:0b: [io 0x00f0-0x00ff]
[ 4.731848] pnp 00:0b: [irq 13]
[ 4.732371] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 4.734333] pnp 00:0c: [io 0x0400-0x047f]
[ 4.734339] pnp 00:0c: [io 0x1180-0x119f]
[ 4.734346] pnp 00:0c: [io 0x0500-0x057f]
[ 4.734353] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 4.734361] pnp 00:0c: [mem 0xfec00000-0xfecfffff]
[ 4.734368] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 4.735456] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 4.736869] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 4.737700] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 4.740380] pnp: PnP ACPI: found 14 devices
[ 4.740387] ACPI: ACPI bus type pnp unregistered
[ 4.740459] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 4.740471] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 4.740483] system 00:01: [mem 0xfe000000-0xfe9fffff] has been reserved
[ 4.740496] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved
[ 4.740508] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 4.740524] system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
[ 4.740535] system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
[ 4.740836] system 00:02: [io 0x0290-0x029f] has been reserved
[ 4.740881] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 4.740917] system 00:0c: [io 0x0400-0x047f] has been reserved
[ 4.740928] system 00:0c: [io 0x1180-0x119f] has been reserved
[ 4.740941] system 00:0c: [io 0x0500-0x057f] could not be reserved
[ 4.740953] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 4.740969] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 4.740980] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 4.791497] pci 0000:00:1c.0: BAR 9: assigned [mem 0xfee00000-0xfeffffff 64bit pref]
[ 4.791511] pci 0000:00:1c.4: BAR 9: assigned [mem 0xfb200000-0xfb3fffff 64bit pref]
[ 4.791520] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 4.791530] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 4.791544] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff]
[ 4.791555] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 4.791571] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 4.791577] pci 0000:00:03.0: bridge window [io disabled]
[ 4.791589] pci 0000:00:03.0: bridge window [mem disabled]
[ 4.791599] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 4.791616] pci 0000:00:05.0: PCI bridge to [bus 04-04]
[ 4.791621] pci 0000:00:05.0: bridge window [io disabled]
[ 4.791633] pci 0000:00:05.0: bridge window [mem disabled]
[ 4.791644] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 4.791660] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 4.791666] pci 0000:00:07.0: bridge window [io disabled]
[ 4.791680] pci 0000:00:07.0: bridge window [mem disabled]
[ 4.791690] pci 0000:00:07.0: bridge window [mem pref disabled]
[ 4.791706] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[ 4.791711] pci 0000:06:00.0: bridge window [io disabled]
[ 4.791725] pci 0000:06:00.0: bridge window [mem disabled]
[ 4.791735] pci 0000:06:00.0: bridge window [mem pref disabled]
[ 4.791753] pci 0000:06:00.2: PCI bridge to [bus 08-08]
[ 4.791761] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff]
[ 4.791776] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff]
[ 4.791785] pci 0000:06:00.2: bridge window [mem pref disabled]
[ 4.791802] pci 0000:00:09.0: PCI bridge to [bus 06-08]
[ 4.791813] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 4.791826] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff]
[ 4.791837] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 4.791854] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
[ 4.791862] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 4.791877] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff]
[ 4.791888] pci 0000:00:1c.0: bridge window [mem 0xfee00000-0xfeffffff 64bit pref]
[ 4.791907] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
[ 4.791917] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 4.791933] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 4.791946] pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb3fffff 64bit pref]
[ 4.791964] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
[ 4.791975] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 4.791989] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 4.792048] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 4.792132] pci 0000:00:01.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76
[ 4.792145] pci 0000:00:01.0: setting latency timer to 64
[ 4.792186] pci 0000:00:03.0: PCI INT A -> GSI 72 (level, low) -> IRQ 72
[ 4.792199] pci 0000:00:03.0: setting latency timer to 64
[ 4.792242] pci 0000:00:05.0: PCI INT A -> GSI 74 (level, low) -> IRQ 74
[ 4.792255] pci 0000:00:05.0: setting latency timer to 64
[ 4.792297] pci 0000:00:07.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78
[ 4.792312] pci 0000:00:07.0: setting latency timer to 64
[ 4.792357] pci 0000:00:09.0: PCI INT A -> GSI 80 (level, low) -> IRQ 80
[ 4.792368] pci 0000:00:09.0: setting latency timer to 64
[ 4.792398] pci 0000:06:00.0: setting latency timer to 64
[ 4.792425] pci 0000:06:00.2: setting latency timer to 64
[ 4.792466] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.792478] pci 0000:00:1c.0: setting latency timer to 64
[ 4.792503] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.792517] pci 0000:00:1c.4: setting latency timer to 64
[ 4.792538] pci 0000:00:1e.0: setting latency timer to 64
[ 4.792549] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 4.792555] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 4.792561] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 4.792567] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 4.792574] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 4.792581] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbbfffff]
[ 4.792589] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 4.792595] pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfb9fffff]
[ 4.792601] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ 4.792607] pci_bus 0000:08: resource 1 [mem 0xfb700000-0xfb9fffff]
[ 4.792613] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
[ 4.792619] pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb6fffff]
[ 4.792625] pci_bus 0000:09: resource 2 [mem 0xfee00000-0xfeffffff 64bit pref]
[ 4.792632] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff]
[ 4.792639] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 4.792646] pci_bus 0000:0a: resource 2 [mem 0xfb200000-0xfb3fffff 64bit pref]
[ 4.792652] pci_bus 0000:0b: resource 0 [io 0xa000-0xafff]
[ 4.792658] pci_bus 0000:0b: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 4.792665] pci_bus 0000:0b: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 4.792672] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
[ 4.792679] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff]
[ 4.792684] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
[ 4.792690] pci_bus 0000:0b: resource 7 [mem 0xc0000000-0xffffffff]
[ 4.792816] NET: Registered protocol family 2
[ 4.797820] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 4.809425] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 4.817175] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes)
[ 4.819180] TCP: Hash tables configured (established 524288 bind 65536)
[ 4.819189] TCP reno registered
[ 4.820949] UDP hash table entries: 8192 (order: 8, 1572864 bytes)
[ 4.823252] UDP-Lite hash table entries: 8192 (order: 8, 1572864 bytes)
[ 4.825396] NET: Registered protocol family 1
[ 4.826619] RPC: Registered udp transport module.
[ 4.826626] RPC: Registered tcp transport module.
[ 4.826632] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.826873] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003f
[ 4.826880] pci 0000:00:1a.0: Performing full reset
[ 4.826921] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x003f
[ 4.826927] pci 0000:00:1a.2: Performing full reset
[ 5.574610] pci 0000:00:1a.7: EHCI: BIOS handoff
[ 5.601192] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x103f
[ 5.607834] pci 0000:00:1d.0: Performing full reset
[ 5.612839] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x003f
[ 5.619470] pci 0000:00:1d.1: Performing full reset
[ 5.624479] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x003f
[ 5.631104] pci 0000:00:1d.2: Performing full reset
[ 5.637800] pci 0000:00:1d.7: EHCI: BIOS handoff
[ 5.664397] pci 0000:0b:01.0: Boot video device
[ 5.669048] PCI: CLS 64 bytes, default 64
[ 5.673314] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 5.679862] Placing 64MB software IO TLB between ffff8800b7800000 - ffff8800bb800000
[ 5.687780] software IO TLB at phys 0xb7800000 - 0xbb800000
[ 5.739790] Machine check injector initialized
[ 5.765970] microcode: CPU0 sig=0x206c1, pf=0x1, revision=0x3
[ 5.771837] microcode: CPU1 sig=0x206c1, pf=0x1, revision=0x3
[ 5.777707] microcode: CPU2 sig=0x206c1, pf=0x1, revision=0x3
[ 5.783571] microcode: CPU3 sig=0x206c1, pf=0x1, revision=0x3
[ 5.789437] microcode: CPU4 sig=0x206c1, pf=0x1, revision=0x3
[ 5.795297] microcode: CPU5 sig=0x206c1, pf=0x1, revision=0x3
[ 5.801152] microcode: CPU6 sig=0x206c1, pf=0x1, revision=0x3
[ 5.807028] microcode: CPU7 sig=0x206c1, pf=0x1, revision=0x3
[ 5.812886] microcode: CPU8 sig=0x206c1, pf=0x1, revision=0x3
[ 5.818744] microcode: CPU9 sig=0x206c1, pf=0x1, revision=0x3
[ 5.824594] microcode: CPU10 sig=0x206c1, pf=0x1, revision=0x3
[ 5.830529] microcode: CPU11 sig=0x206c1, pf=0x1, revision=0x3
[ 5.836471] microcode: CPU12 sig=0x206c1, pf=0x1, revision=0x3
[ 5.842418] microcode: CPU13 sig=0x206c1, pf=0x1, revision=0x3
[ 5.848491] microcode: CPU14 sig=0x206c1, pf=0x1, revision=0x3
[ 5.854441] microcode: CPU15 sig=0x206c1, pf=0x1, revision=0x3
[ 5.860406] microcode: CPU16 sig=0x206c1, pf=0x1, revision=0x3
[ 5.866358] microcode: CPU17 sig=0x206c1, pf=0x1, revision=0x3
[ 5.872315] microcode: CPU18 sig=0x206c1, pf=0x1, revision=0x3
[ 5.878263] microcode: CPU19 sig=0x206c1, pf=0x1, revision=0x3
[ 5.884205] microcode: CPU20 sig=0x206c1, pf=0x1, revision=0x3
[ 5.890150] microcode: CPU21 sig=0x206c1, pf=0x1, revision=0x3
[ 5.896086] microcode: CPU22 sig=0x206c1, pf=0x1, revision=0x3
[ 5.902185] microcode: CPU23 sig=0x206c1, pf=0x1, revision=0x3
[ 5.908358] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 5.917320] Scanning for low memory corruption every 60 seconds
[ 5.928092] Initializing RT-Tester: OK
[ 5.931985] audit: initializing netlink socket (disabled)
[ 5.937514] type=2000 audit(1289719444.936:1): initialized
[ 5.952089] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 5.960060] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 5.970455] fuse init (API version 7.15)
[ 5.974884] msgmni has been set to 31944
[ 5.984413] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1c
[ 5.990971] pcieport 0000:00:01.0: setting latency timer to 64
[ 5.996951] pcieport 0000:00:01.0: irq 112 for MSI/MSI-X
[ 6.004875] pcieport 0000:00:03.0: ACPI _OSC control granted for 0x1c
[ 6.011431] pcieport 0000:00:03.0: setting latency timer to 64
[ 6.017432] pcieport 0000:00:03.0: irq 113 for MSI/MSI-X
[ 6.025457] pcieport 0000:00:05.0: ACPI _OSC control granted for 0x1c
[ 6.032023] pcieport 0000:00:05.0: setting latency timer to 64
[ 6.037997] pcieport 0000:00:05.0: irq 114 for MSI/MSI-X
[ 6.046242] pcieport 0000:00:07.0: ACPI _OSC control granted for 0x1c
[ 6.052798] pcieport 0000:00:07.0: setting latency timer to 64
[ 6.058798] pcieport 0000:00:07.0: irq 115 for MSI/MSI-X
[ 6.067269] pcieport 0000:00:09.0: ACPI _OSC control granted for 0x1c
[ 6.073831] pcieport 0000:00:09.0: setting latency timer to 64
[ 6.079864] pcieport 0000:00:09.0: irq 116 for MSI/MSI-X
[ 6.088025] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1c
[ 6.094579] pcieport 0000:00:1c.0: setting latency timer to 64
[ 6.100593] pcieport 0000:00:1c.0: irq 117 for MSI/MSI-X
[ 6.108762] pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1c
[ 6.115329] pcieport 0000:00:1c.4: setting latency timer to 64
[ 6.121358] pcieport 0000:00:1c.4: irq 118 for MSI/MSI-X
[ 6.127890] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 6.134028] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 6.140098] aer 0000:00:05.0:pcie02: service driver aer loaded
[ 6.146130] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 6.152321] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 6.158700] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.166885] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 6.175250] ACPI: Sleep Button [SLPB]
[ 6.179907] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 6.188275] ACPI: Power Button [PWRB]
[ 6.192563] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.200142] ACPI: Power Button [PWRF]
[ 6.206159] ACPI: acpi_idle registered with cpuidle
[ 6.212142] Monitor-Mwait will be used to enter C-3 state
[ 6.217760] Monitor-Mwait will be used to enter C-3 state
[ 6.555530] Initializing Nozomi driver 2.1d (build date: Nov 14 2010 07:18:48)
[ 6.566017] Non-volatile memory driver v1.3
[ 6.571399] Linux agpgart interface v0.103
[ 6.575867] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 6.584999] Hangcheck: Using getrawmonotonic().
[ 6.589896] [drm] Initialized drm 1.1.0 20060810
[ 6.594616] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 6.602273] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.629407] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 6.673525] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 6.749666] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 6.789313] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 6.827825] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[ 6.834984] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.841253] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
[ 6.847278] e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
[ 6.853662] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
[ 6.860385] Copyright (c) 2007-2009 Intel Corporation.
[ 6.865892] igb 0000:01:00.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76
[ 6.872714] igb 0000:01:00.0: setting latency timer to 64
[ 6.878642] igb 0000:01:00.0: irq 119 for MSI/MSI-X
[ 6.883632] igb 0000:01:00.0: irq 120 for MSI/MSI-X
[ 6.888614] igb 0000:01:00.0: irq 121 for MSI/MSI-X
[ 6.893596] igb 0000:01:00.0: irq 122 for MSI/MSI-X
[ 6.898580] igb 0000:01:00.0: irq 123 for MSI/MSI-X
[ 6.903562] igb 0000:01:00.0: irq 124 for MSI/MSI-X
[ 6.908546] igb 0000:01:00.0: irq 125 for MSI/MSI-X
[ 6.913529] igb 0000:01:00.0: irq 126 for MSI/MSI-X
[ 6.918513] igb 0000:01:00.0: irq 127 for MSI/MSI-X
[ 7.104139] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 7.111151] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:26
[ 7.118460] igb 0000:01:00.0: eth0: PBA No: 0010ff-0ff
[ 7.123704] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 7.131472] igb 0000:01:00.1: PCI INT B -> GSI 88 (level, low) -> IRQ 88
[ 7.138289] igb 0000:01:00.1: setting latency timer to 64
[ 7.144104] igb 0000:01:00.1: irq 128 for MSI/MSI-X
[ 7.149094] igb 0000:01:00.1: irq 129 for MSI/MSI-X
[ 7.154075] igb 0000:01:00.1: irq 130 for MSI/MSI-X
[ 7.159058] igb 0000:01:00.1: irq 131 for MSI/MSI-X
[ 7.164045] igb 0000:01:00.1: irq 132 for MSI/MSI-X
[ 7.169025] igb 0000:01:00.1: irq 133 for MSI/MSI-X
[ 7.174016] igb 0000:01:00.1: irq 134 for MSI/MSI-X
[ 7.179010] igb 0000:01:00.1: irq 135 for MSI/MSI-X
[ 7.183992] igb 0000:01:00.1: irq 136 for MSI/MSI-X
[ 7.358341] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 7.365323] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:27
[ 7.372640] igb 0000:01:00.1: eth1: PBA No: 0010ff-0ff
[ 7.377883] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 7.385839] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[ 7.392559] Copyright (c) 2009 Intel Corporation.
[ 7.397601] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.84-k2
[ 7.405599] ixgbe: Copyright (c) 1999-2010 Intel Corporation.
[ 7.411691] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 7.418933] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 7.426754] jme: JMicron JMC2XX ethernet driver version 1.0.7
[ 7.432849] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 7.439046] e100: Copyright(c) 1999-2006 Intel Corporation
[ 7.444707] e100 0000:08:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
[ 7.476300] e100 0000:08:01.0: PME# disabled
[ 7.482650] e100 0000:08:01.0: eth2: addr 0xfb900000, irq 48, MAC addr 00:0e:0c:7f:c7:3e
[ 7.492405] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[ 7.500623] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.6 (Oct 12, 2010)
[ 7.508956] sky2: driver version 1.28
[ 7.516617] tun: Universal TUN/TAP device driver, 1.6
[ 7.521779] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 7.530337] usbcore: registered new interface driver catc
[ 7.535846] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[ 7.542129] usbcore: registered new interface driver kaweth
[ 7.547806] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 7.555691] usbcore: registered new interface driver pegasus
[ 7.561457] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 7.568670] usbcore: registered new interface driver rtl8150
[ 7.574902] usbcore: registered new interface driver asix
[ 7.581402] usbcore: registered new interface driver cdc_ether
[ 7.587580] usbcore: registered new interface driver cdc_eem
[ 7.593572] usbcore: registered new interface driver dm9601
[ 7.600087] usbcore: registered new interface driver smsc75xx
[ 7.606208] usbcore: registered new interface driver smsc95xx
[ 7.612302] usbcore: registered new interface driver gl620a
[ 7.618466] usbcore: registered new interface driver net1080
[ 7.624464] usbcore: registered new interface driver plusb
[ 7.630527] usbcore: registered new interface driver rndis_host
[ 7.637310] usbcore: registered new interface driver cdc_subset
[ 7.643573] usbcore: registered new interface driver zaurus
[ 7.649735] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 7.657531] usbcore: registered new interface driver int51x1
[ 7.663304] netconsole: local port 6665
[ 7.667238] netconsole: local IP 10.0.0.0
[ 7.671362] netconsole: interface 'eth0'
[ 7.676969] netconsole: remote port 6666
[ 7.680993] netconsole: remote IP 10.239.51.110
[ 7.685620] netconsole: remote ethernet address 00:30:48:fe:19:94
[ 7.691816] netconsole: device eth0 not up yet, forcing it
[ 9.949586] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 16.444357] console [netcon0] enabled
[ 16.448136] netconsole: network logging started
[ 16.454478] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.461130] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 16.467316] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 16.474623] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 16.480577] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 16.485950] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file 'devices'
[ 16.493884] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 16.501466] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 16.513033] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 16.522182] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 16.531797] ehci_hcd 0000:00:1a.7: debug port 1
[ 16.536449] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 16.549456] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 16.556356] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 16.562578] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbe23000
[ 16.568354] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 16.581374] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 16.595034] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 16.600995] usb usb1: default language 0x0409
[ 16.605489] usb usb1: udev 1, busnum 1, minor = 0
[ 16.610303] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.617207] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.624613] usb usb1: Product: EHCI Host Controller
[ 16.629606] usb usb1: Manufacturer: Linux 2.6.37-rc1 ehci_hcd
[ 16.635464] usb usb1: SerialNumber: 0000:00:1a.7
[ 16.641260] usb usb1: usb_probe_device
[ 16.645408] usb usb1: configuration #1 chosen from 1 choice
[ 16.651377] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 16.658079] hub 1-0:1.0: usb_probe_interface
[ 16.662740] hub 1-0:1.0: usb_probe_interface - got id
[ 16.668175] hub 1-0:1.0: USB hub found
[ 16.672053] hub 1-0:1.0: 6 ports detected
[ 16.676183] hub 1-0:1.0: standalone hub
[ 16.680137] hub 1-0:1.0: no power switching (usb 1.0)
[ 16.685302] hub 1-0:1.0: individual port over-current protection
[ 16.691424] hub 1-0:1.0: power on to power good time: 20ms
[ 16.697037] hub 1-0:1.0: local power source is good
[ 16.702027] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 16.709428] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 16.717487] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 16.724764] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 16.730714] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 16.736063] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '002'
[ 16.743663] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 16.755034] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 16.764184] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 16.773791] ehci_hcd 0000:00:1d.7: debug port 1
[ 16.778441] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 16.791456] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 16.798358] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 16.804246] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbe22000
[ 16.810077] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 16.810083] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 16.828684] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 16.843033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 16.849901] usb usb2: default language 0x0409
[ 16.855549] usb usb2: udev 1, busnum 2, minor = 128
[ 16.860804] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.867969] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.875637] usb usb2: Product: EHCI Host Controller
[ 16.880897] usb usb2: Manufacturer: Linux 2.6.37-rc1 ehci_hcd
[ 16.887027] usb usb2: SerialNumber: 0000:00:1d.7
[ 16.892923] usb usb2: usb_probe_device
[ 16.896796] usb usb2: configuration #1 chosen from 1 choice
[ 16.902497] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 16.908910] hub 2-0:1.0: usb_probe_interface
[ 16.913299] hub 2-0:1.0: usb_probe_interface - got id
[ 16.918472] hub 2-0:1.0: USB hub found
[ 16.922346] hub 2-0:1.0: 6 ports detected
[ 16.926470] hub 2-0:1.0: standalone hub
[ 16.930420] hub 2-0:1.0: no power switching (usb 1.0)
[ 16.935589] hub 2-0:1.0: individual port over-current protection
[ 16.941711] hub 2-0:1.0: power on to power good time: 20ms
[ 16.947324] hub 2-0:1.0: local power source is good
[ 16.952313] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 16.959706] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 16.967983] uhci_hcd: USB Universal Host Controller Interface driver
[ 16.974513] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.981803] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 16.987757] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 16.993114] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '003'
[ 17.000701] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 17.012034] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 17.017034] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 17.023850] uhci_hcd 0000:00:1a.0: Performing full reset
[ 17.029284] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 17.035438] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
[ 17.041393] usb usb3: default language 0x0409
[ 17.045881] usb usb3: udev 1, busnum 3, minor = 256
[ 17.050869] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.057775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.065194] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 17.074170] hub 2-0:1.0: port 1: status 0501 change 0001
[ 17.079627] usb usb3: Product: UHCI Host Controller
[ 17.084621] usb usb3: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
[ 17.090480] usb usb3: SerialNumber: 0000:00:1a.0
[ 17.095849] usb usb3: usb_probe_device
[ 17.099719] usb usb3: configuration #1 chosen from 1 choice
[ 17.105419] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 17.111836] hub 3-0:1.0: usb_probe_interface
[ 17.116224] hub 3-0:1.0: usb_probe_interface - got id
[ 17.121395] hub 3-0:1.0: USB hub found
[ 17.125269] hub 3-0:1.0: 2 ports detected
[ 17.129393] hub 3-0:1.0: standalone hub
[ 17.133343] hub 3-0:1.0: no power switching (usb 1.0)
[ 17.138512] hub 3-0:1.0: individual port over-current protection
[ 17.144634] hub 3-0:1.0: power on to power good time: 2ms
[ 17.150160] hub 3-0:1.0: local power source is good
[ 17.155150] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 17.162522] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 17.170545] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 17.176728] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 17.184024] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000
[ 17.184028] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 17.184032] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 17.184045] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '004'
[ 17.184079] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[ 17.216030] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 17.223034] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 17.228033] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 17.234851] uhci_hcd 0000:00:1a.2: Performing full reset
[ 17.240285] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 17.246172] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000f0a0
[ 17.252118] usb usb4: default language 0x0409
[ 17.256615] usb usb4: udev 1, busnum 4, minor = 384
[ 17.261601] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.268532] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.273218] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
[ 17.273223] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 17.273231] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
[ 17.297018] usb usb4: Product: UHCI Host Controller
[ 17.302014] usb usb4: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
[ 17.307918] usb usb4: SerialNumber: 0000:00:1a.2
[ 17.313955] usb usb4: usb_probe_device
[ 17.317827] usb usb4: configuration #1 chosen from 1 choice
[ 17.323529] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 17.324067] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 17.324104] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 17.324108] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
[ 17.351688] hub 4-0:1.0: usb_probe_interface
[ 17.356078] hub 4-0:1.0: usb_probe_interface - got id
[ 17.361249] hub 4-0:1.0: USB hub found
[ 17.365123] hub 4-0:1.0: 2 ports detected
[ 17.369245] hub 4-0:1.0: standalone hub
[ 17.373196] hub 4-0:1.0: no power switching (usb 1.0)
[ 17.378365] hub 4-0:1.0: individual port over-current protection
[ 17.384487] hub 4-0:1.0: power on to power good time: 2ms
[ 17.390021] hub 4-0:1.0: local power source is good
[ 17.395014] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 17.402390] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 17.410090] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 17.416262] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 17.423520] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 17.429733] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 17.435346] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '005'
[ 17.443197] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 17.455034] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 17.460302] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 17.467384] uhci_hcd 0000:00:1d.0: Performing full reset
[ 17.473093] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 17.479494] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 17.485413] usb usb5: default language 0x0409
[ 17.489904] usb usb5: udev 1, busnum 5, minor = 512
[ 17.494893] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.501800] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.509233] usb usb5: Product: UHCI Host Controller
[ 17.509239] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 17.519805] usb usb5: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
[ 17.525664] usb usb5: SerialNumber: 0000:00:1d.0
[ 17.531120] usb usb5: usb_probe_device
[ 17.534991] usb usb5: configuration #1 chosen from 1 choice
[ 17.540689] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 17.547238] hub 5-0:1.0: usb_probe_interface
[ 17.551632] hub 5-0:1.0: usb_probe_interface - got id
[ 17.556796] hub 5-0:1.0: USB hub found
[ 17.560670] hub 5-0:1.0: 2 ports detected
[ 17.564796] hub 5-0:1.0: standalone hub
[ 17.568743] hub 5-0:1.0: no power switching (usb 1.0)
[ 17.573914] hub 5-0:1.0: individual port over-current protection
[ 17.580037] hub 5-0:1.0: power on to power good time: 2ms
[ 17.585562] hub 5-0:1.0: local power source is good
[ 17.590550] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 17.597923] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 17.605936] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 17.612099] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 17.619379] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 17.625328] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 17.630681] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '006'
[ 17.638260] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 17.649033] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 17.654033] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 17.660851] uhci_hcd 0000:00:1d.1: Performing full reset
[ 17.666284] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 17.672164] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 17.678125] usb usb6: default language 0x0409
[ 17.682621] usb usb6: udev 1, busnum 6, minor = 640
[ 17.687611] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.694512] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.701924] uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00
[ 17.707373] hub 5-0:1.0: port 1: status 0101 change 0003
[ 17.712819] usb usb6: Product: UHCI Host Controller
[ 17.717815] usb usb6: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
[ 17.723676] usb usb6: SerialNumber: 0000:00:1d.1
[ 17.729391] usb usb6: usb_probe_device
[ 17.733259] usb usb6: configuration #1 chosen from 1 choice
[ 17.738961] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 17.745645] hub 6-0:1.0: usb_probe_interface
[ 17.750042] hub 6-0:1.0: usb_probe_interface - got id
[ 17.755214] hub 6-0:1.0: USB hub found
[ 17.759088] hub 6-0:1.0: 2 ports detected
[ 17.763213] hub 6-0:1.0: standalone hub
[ 17.767161] hub 6-0:1.0: no power switching (usb 1.0)
[ 17.772331] hub 6-0:1.0: individual port over-current protection
[ 17.778452] hub 6-0:1.0: power on to power good time: 2ms
[ 17.783979] hub 6-0:1.0: local power source is good
[ 17.788968] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 17.796011] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 17.804388] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 17.810547] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 17.817820] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 17.817825] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 17.817830] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 17.817842] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '007'
[ 17.817874] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 17.849820] hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 17.857029] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 17.862025] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 17.868836] uhci_hcd 0000:00:1d.2: Performing full reset
[ 17.874270] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 17.880138] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 17.886065] usb usb7: default language 0x0409
[ 17.890553] usb usb7: udev 1, busnum 7, minor = 768
[ 17.895568] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.902473] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.909879] usb usb7: Product: UHCI Host Controller
[ 17.914869] usb usb7: Manufacturer: Linux 2.6.37-rc1 uhci_hcd
[ 17.920730] usb usb7: SerialNumber: 0000:00:1d.2
[ 17.926503] usb usb7: usb_probe_device
[ 17.930376] usb usb7: configuration #1 chosen from 1 choice
[ 17.936080] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 17.942533] hub 7-0:1.0: usb_probe_interface
[ 17.946925] hub 7-0:1.0: usb_probe_interface - got id
[ 17.952091] hub 7-0:1.0: USB hub found
[ 17.955999] hub 7-0:1.0: 2 ports detected
[ 17.958056] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 17.967202] hub 7-0:1.0: standalone hub
[ 17.971152] hub 7-0:1.0: no power switching (usb 1.0)
[ 17.976320] hub 7-0:1.0: individual port over-current protection
[ 17.982443] hub 7-0:1.0: power on to power good time: 2ms
[ 17.987969] hub 7-0:1.0: local power source is good
[ 17.992956] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 18.000359] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 18.008071] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 18.015070] usbcore: registered new interface driver libusual
[ 18.027500] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 18.038185] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.043281] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.051214] mice: PS/2 mouse device common for all mice
[ 18.061795] rtc_cmos 00:08: RTC can wake from S4
[ 18.073346] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 18.079578] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 18.086398] usb 5-1: ep0 maxpacket = 8
[ 18.086907] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 18.087925] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[ 18.088585] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.088594] iTCO_vendor_support: vendor-support=0
[ 18.088599] SoftDog: cannot register miscdev on minor=130 (err=-16)
[ 18.136633] cpuidle: using governor ladder
[ 18.140881] usb 5-1: udev 2, busnum 5, minor = 513
[ 18.145805] usb 5-1: New USB device found, idVendor=0557, idProduct=8021
[ 18.152648] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 18.161351] usb 5-1: usb_probe_device
[ 18.165165] usb 5-1: configuration #1 chosen from 1 choice
[ 18.173451] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 18.179789] hub 5-1:1.0: usb_probe_interface
[ 18.184205] hub 5-1:1.0: usb_probe_interface - got id
[ 18.189403] hub 5-1:1.0: USB hub found
[ 18.194548] hub 5-1:1.0: 4 ports detected
[ 18.199052] hub 5-1:1.0: standalone hub
[ 18.203062] hub 5-1:1.0: individual port power switching
[ 18.204058] usb usb3: suspend_rh (auto-stop)
[ 18.204737] cpuidle: using governor menu
[ 18.204741] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 18.204789] ioatdma 0000:00:16.0: can't derive routing for PCI INT A
[ 18.204792] ioatdma 0000:00:16.0: PCI INT A: no GSI
[ 18.204832] ioatdma 0000:00:16.0: setting latency timer to 64
[ 18.204988] ioatdma 0000:00:16.0: irq 137 for MSI/MSI-X
[ 18.245691] hub 5-1:1.0: individual port over-current protection
[ 18.248483] igb 0000:01:00.0: DCA enabled
[ 18.249456] igb 0000:01:00.1: DCA enabled
[ 18.249508] ioatdma 0000:00:16.1: can't derive routing for PCI INT B
[ 18.249512] ioatdma 0000:00:16.1: PCI INT B: no GSI
[ 18.249548] ioatdma 0000:00:16.1: setting latency timer to 64
[ 18.249709] ioatdma 0000:00:16.1: irq 138 for MSI/MSI-X
[ 18.283150] hub 5-1:1.0: power on to power good time: 100ms
[ 18.285236] ioatdma 0000:00:16.2: can't derive routing for PCI INT C
[ 18.285241] ioatdma 0000:00:16.2: PCI INT C: no GSI
[ 18.285280] ioatdma 0000:00:16.2: setting latency timer to 64
[ 18.285425] ioatdma 0000:00:16.2: irq 139 for MSI/MSI-X
[ 18.313623] ioatdma 0000:00:16.3: can't derive routing for PCI INT D
[ 18.314443] hub 5-1:1.0: local power source is good
[ 18.314447] hub 5-1:1.0: enabling power on all ports
[ 18.318481] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '002'
[ 18.318889] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 18.318894] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 18.350479] ioatdma 0000:00:16.3: PCI INT D: no GSI
[ 18.355545] ioatdma 0000:00:16.3: setting latency timer to 64
[ 18.361531] ioatdma 0000:00:16.3: irq 140 for MSI/MSI-X
[ 18.369586] ioatdma 0000:00:16.4: can't derive routing for PCI INT A
[ 18.376061] ioatdma 0000:00:16.4: PCI INT A: no GSI
[ 18.381135] ioatdma 0000:00:16.4: setting latency timer to 64
[ 18.387138] ioatdma 0000:00:16.4: irq 141 for MSI/MSI-X
[ 18.394480] ioatdma 0000:00:16.5: can't derive routing for PCI INT B
[ 18.400947] ioatdma 0000:00:16.5: PCI INT B: no GSI
[ 18.406018] ioatdma 0000:00:16.5: setting latency timer to 64
[ 18.412002] ioatdma 0000:00:16.5: irq 142 for MSI/MSI-X
[ 18.419494] hub 5-1:1.0: port 1: status 0301 change 0001
[ 18.420905] ioatdma 0000:00:16.6: can't derive routing for PCI INT C
[ 18.420909] ioatdma 0000:00:16.6: PCI INT C: no GSI
[ 18.420947] ioatdma 0000:00:16.6: setting latency timer to 64
[ 18.421156] ioatdma 0000:00:16.6: irq 143 for MSI/MSI-X
[ 18.450306] ioatdma 0000:00:16.7: can't derive routing for PCI INT D
[ 18.454089] usb usb4: suspend_rh (auto-stop)
[ 18.461147] ioatdma 0000:00:16.7: PCI INT D: no GSI
[ 18.466224] ioatdma 0000:00:16.7: setting latency timer to 64
[ 18.472223] ioatdma 0000:00:16.7: irq 144 for MSI/MSI-X
[ 18.483590] usbcore: registered new interface driver usbhid
[ 18.489275] usbhid: USB HID core driver
[ 18.495856] dell-wmi: No known WMI GUID found
[ 18.500333] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 18.505162] acer-wmi: No or unsupported WMI interface, unable to load
[ 18.514234] ALSA device list:
[ 18.517319] No soundcards found.
[ 18.521391] oprofile: using NMI interrupt.
[ 18.525689] netem: version 1.2
[ 18.528854] Netfilter messages via NETLINK v0.30.
[ 18.533691] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 18.540949] ctnetlink v0.93: registering with nfnetlink.
[ 18.546413] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 18.552052] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
[ 18.552075] hub 5-1:1.0: state 7 ports 4 chg 0002 evt 0000
[ 18.554498] hub 5-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
[ 18.574000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 18.581244] xt_time: kernel timezone is -0000
[ 18.587733] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.594750] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 18.601285] arp_tables: (C) 2002 David S. Miller
[ 18.606491] TCP bic registered
[ 18.609953] TCP cubic registered
[ 18.613583] TCP westwood registered
[ 18.617474] TCP highspeed registered
[ 18.619495] usb 5-1.1: new low speed USB device using uhci_hcd and address 3
[ 18.628886] TCP hybla registered
[ 18.632553] TCP htcp registered
[ 18.636089] TCP vegas registered
[ 18.639713] TCP veno registered
[ 18.643263] TCP scalable registered
[ 18.647149] TCP lp registered
[ 18.650517] TCP yeah registered
[ 18.654058] TCP illinois registered
[ 18.657949] Initializing XFRM netlink socket
[ 18.662652] NET: Registered protocol family 17
[ 18.667798] NET: Registered protocol family 15
[ 18.672429] Bridge firewalling registered
[ 18.676546] Ebtables v2.0 registered
[ 18.742538] registered taskstats version 1
[ 18.750997] Magic number: 2:198:420
[ 18.751527] usb 5-1.1: skipped 1 descriptor after interface
[ 18.751535] usb 5-1.1: skipped 1 descriptor after interface
[ 18.751541] usb 5-1.1: skipped 1 descriptor after interface
[ 18.758510] usb 5-1.1: default language 0x0409
[ 18.776884] thermal cooling_device16: hash matches
[ 18.782790] rtc_cmos 00:08: setting system clock to 2010-11-14 07:24:20 UTC (1289719460)
[ 18.788501] usb 5-1.1: udev 3, busnum 5, minor = 514
[ 18.788505] usb 5-1.1: New USB device found, idVendor=0557, idProduct=2261
[ 18.788509] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 18.788513] usb 5-1.1: Product: CS1716A V1.0.098
[ 18.788515] usb 5-1.1: Manufacturer: ATEN International Co. Ltd
[ 18.790258] usb 5-1.1: usb_probe_device
[ 18.790264] usb 5-1.1: configuration #1 chosen from 1 choice
[ 18.794504] usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0)
[ 18.795407] usbhid 5-1.1:1.0: usb_probe_interface
[ 18.795412] usbhid 5-1.1:1.0: usb_probe_interface - got id
[ 18.857298] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input3
[ 18.869778] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 118 us
[ 18.878520] generic-usb 0003:0557:2261.0001: input: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input0
[ 18.892653] usb 5-1.1: adding 5-1.1:1.1 (config #1, interface 1)
[ 18.899629] usbhid 5-1.1:1.1: usb_probe_interface
[ 18.904469] usbhid 5-1.1:1.1: usb_probe_interface - got id
[ 18.943449] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input4
[ 18.954131] usb usb6: suspend_rh (auto-stop)
[ 18.960296] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 8, phase 4, 118 us
[ 18.969133] generic-usb 0003:0557:2261.0002: input: USB HID v1.00 Device [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input1
[ 18.983148] usb 5-1.1: adding 5-1.1:1.2 (config #1, interface 2)
[ 18.990029] usbhid 5-1.1:1.2: usb_probe_interface
[ 18.994861] usbhid 5-1.1:1.2: usb_probe_interface - got id
[ 19.025408] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.2/input/input5
[ 19.039538] generic-usb 0003:0557:2261.0003: input: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input2
[ 19.053502] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '003'
[ 19.061510] hub 5-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 19.204140] usb usb7: suspend_rh (auto-stop)
[ 79.840691] e100 0000:08:01.0: eth2: Failed to load firmware "e100/d101m_ucode.bin": -2
[ 79.849434] IP-Config: Failed to open eth2
[ 80.854214] Sending DHCP requests ., OK
[ 80.865112] IP-Config: Got DHCP answer from 192.168.1.209, my address is 192.168.1.149
[ 81.065823] IP-Config: Complete:
[ 81.068929] device=eth0, addr=192.168.1.149, mask=255.255.255.0, gw=192.168.1.1,
[ 81.077074] host=lkp-ws02, domain=tsp.org, nis-domain=(none),
[ 81.083412] bootserver=192.168.1.209, rootserver=10.239.51.240, rootpath=
[ 81.151964] VFS: Mounted root (nfs filesystem) on device 0:14.
[ 81.157993] debug: unmapping init memory ffffffff82449000..ffffffff826f1000
INIT: version 2.86 booting
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Greg KH: "Re: [PATCH 8/19]: SCST SYSFS interface implementation"
Previous message: Alexey Charkov: "[PATCH 5/6 v3] rtc: Add support for the RTC in VIA VT8500 andcompatibles"
In reply to: Peter Zijlstra: "Re: [BUG 2.6.27-rc1] find_busiest_group() LOCKUP"
Next in thread: Yinghai Lu: "Re: [BUG 2.6.27-rc1] find_busiest_group() LOCKUP"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]