[041/289] ath9k: lock reset and PCU start/stopping

[Greg KH]

2.6.36-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx>

commit 5e848f789d60000d39d9a5f26ab02dbdd963f6cd upstream.

Apart from locking the start and stop PCU we need
to ensure we also content starting and stopping the PCU
between hardware resets.

This is part of a series that will help resolve the bug:

https://bugzilla.kernel.org/show_bug.cgi?id=14624

For more details about this issue refer to:

http://marc.info/?l=linux-wireless&m=128629803703756&w=2

Cc: Ben Greear <greearb@xxxxxxxxxxxxxxx>
Cc: Kyungwan Nam <kyungwan.nam@xxxxxxxxxxx>
Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx>
Tested-by: Ben Greear <greearb@xxxxxxxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
 drivers/net/wireless/ath/ath9k/main.c |   27 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/recv.c |    2 --
 2 files changed, 27 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -213,6 +213,9 @@ int ath_set_channel(struct ath_softc *sc
 	 */
 	ath9k_hw_set_interrupts(ah, 0);
 	ath_drain_all_txq(sc, false);
+
+	spin_lock_bh(&sc->rx.pcu_lock);
+
 	stopped = ath_stoprecv(sc);
 
 	/* XXX: do not flush receive queue here. We don't want
@@ -239,6 +242,7 @@ int ath_set_channel(struct ath_softc *sc
 			  "reset status %d\n",
 			  channel->center_freq, r);
 		spin_unlock_bh(&sc->sc_resetlock);
+		spin_unlock_bh(&sc->rx.pcu_lock);
 		goto ps_restore;
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
@@ -247,9 +251,12 @@ int ath_set_channel(struct ath_softc *sc
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to restart recv logic\n");
 		r = -EIO;
+		spin_unlock_bh(&sc->rx.pcu_lock);
 		goto ps_restore;
 	}
 
+	spin_unlock_bh(&sc->rx.pcu_lock);
+
 	ath_cache_conf_rate(sc, &hw->conf);
 	ath_update_txpow(sc);
 	ath9k_hw_set_interrupts(ah, ah->imask);
@@ -840,6 +847,7 @@ void ath_radio_enable(struct ath_softc *
 	if (!ah->curchan)
 		ah->curchan = ath_get_curchannel(sc, sc->hw);
 
+	spin_lock_bh(&sc->rx.pcu_lock);
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 	if (r) {
@@ -854,8 +862,10 @@ void ath_radio_enable(struct ath_softc *
 	if (ath_startrecv(sc) != 0) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to restart recv logic\n");
+		spin_unlock_bh(&sc->rx.pcu_lock);
 		return;
 	}
+	spin_unlock_bh(&sc->rx.pcu_lock);
 
 	if (sc->sc_flags & SC_OP_BEACONS)
 		ath_beacon_config(sc, NULL);	/* restart beacons */
@@ -894,6 +904,9 @@ void ath_radio_disable(struct ath_softc
 	ath9k_hw_set_interrupts(ah, 0);
 
 	ath_drain_all_txq(sc, false);	/* clear pending tx frames */
+
+	spin_lock_bh(&sc->rx.pcu_lock);
+
 	ath_stoprecv(sc);		/* turn off frame recv */
 	ath_flushrecv(sc);		/* flush recv queue */
 
@@ -911,6 +924,9 @@ void ath_radio_disable(struct ath_softc
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath9k_hw_phy_disable(ah);
+
+	spin_unlock_bh(&sc->rx.pcu_lock);
+
 	ath9k_hw_configpcipowersave(ah, 1, 1);
 	ath9k_ps_restore(sc);
 	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
@@ -930,6 +946,9 @@ int ath_reset(struct ath_softc *sc, bool
 
 	ath9k_hw_set_interrupts(ah, 0);
 	ath_drain_all_txq(sc, retry_tx);
+
+	spin_lock_bh(&sc->rx.pcu_lock);
+
 	ath_stoprecv(sc);
 	ath_flushrecv(sc);
 
@@ -944,6 +963,8 @@ int ath_reset(struct ath_softc *sc, bool
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to start recv logic\n");
 
+	spin_unlock_bh(&sc->rx.pcu_lock);
+
 	/*
 	 * We may be doing a reset in response to a request
 	 * that changes the channel so update any state that
@@ -1108,6 +1129,7 @@ static int ath9k_start(struct ieee80211_
 	 * be followed by initialization of the appropriate bits
 	 * and then setup of the interrupt mask.
 	 */
+	spin_lock_bh(&sc->rx.pcu_lock);
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
 	if (r) {
@@ -1116,6 +1138,7 @@ static int ath9k_start(struct ieee80211_
 			  "(freq %u MHz)\n", r,
 			  curchan->center_freq);
 		spin_unlock_bh(&sc->sc_resetlock);
+		spin_unlock_bh(&sc->rx.pcu_lock);
 		goto mutex_unlock;
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
@@ -1137,8 +1160,10 @@ static int ath9k_start(struct ieee80211_
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to start recv logic\n");
 		r = -EIO;
+		spin_unlock_bh(&sc->rx.pcu_lock);
 		goto mutex_unlock;
 	}
+	spin_unlock_bh(&sc->rx.pcu_lock);
 
 	/* Setup our intr mask. */
 	ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
@@ -1340,12 +1365,14 @@ static void ath9k_stop(struct ieee80211_
 	 * before setting the invalid flag. */
 	ath9k_hw_set_interrupts(ah, 0);
 
+	spin_lock_bh(&sc->rx.pcu_lock);
 	if (!(sc->sc_flags & SC_OP_INVALID)) {
 		ath_drain_all_txq(sc, false);
 		ath_stoprecv(sc);
 		ath9k_hw_phy_disable(ah);
 	} else
 		sc->rx.rxlink = NULL;
+	spin_unlock_bh(&sc->rx.pcu_lock);
 
 	/* disable HAL and put h/w to sleep */
 	ath9k_hw_disable(ah);
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -523,13 +523,11 @@ bool ath_stoprecv(struct ath_softc *sc)
 
 void ath_flushrecv(struct ath_softc *sc)
 {
-	spin_lock_bh(&sc->rx.pcu_lock);
 	sc->sc_flags |= SC_OP_RXFLUSH;
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
 		ath_rx_tasklet(sc, 1, true);
 	ath_rx_tasklet(sc, 1, false);
 	sc->sc_flags &= ~SC_OP_RXFLUSH;
-	spin_unlock_bh(&sc->rx.pcu_lock);
 }
 
 static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/