[PATCHv3 6/11] HWMON: HWMON module of DA9052 device driver
From: dd diasemi
Date: Tue Dec 21 2010 - 12:53:05 EST
HWMON module for DA9052 PMIC device from Dialog Semiconductor.
Changes made since last submission:
. removed the DA9052 customized success and error codes
. changed da9052_manual_read() return type
Linux Kernel Version: 2.6.34
Signed-off-by: D. Chen <dchen@xxxxxxxxxxx>
---
diff -Naur linux-2.6.34-orig2/drivers/hwmon/da9052-adc.c
linux-2.6.34/drivers/hwmon/da9052-adc.c
--- linux-2.6.34-orig2/drivers/hwmon/da9052-adc.c 1970-01-01
05:00:00.000000000 +0500
+++ linux-2.6.34/drivers/hwmon/da9052-adc.c 2010-10-12 12:20:05.000000000 +0500
@@ -0,0 +1,618 @@
+/*
+ * da9052-adc.c -- ADC Driver for Dialog DA9052
+ *
+ * Copyright(c) 2009 Dialog Semiconductor Ltd.
+ *
+ * Author: Dialog Semiconductor Ltd <dchen@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/platform_device.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/adc.h>
+
+#define DRIVER_NAME "da9052-adc"
+
+static const char *input_names[] = {
+ [DA9052_ADC_VDDOUT] = "VDDOUT",
+ [DA9052_ADC_ICH] = "CHARGING CURRENT",
+ [DA9052_ADC_TBAT] = "BATTERY TEMP",
+ [DA9052_ADC_VBAT] = "BATTERY VOLTAGE",
+ [DA9052_ADC_ADCIN4] = "ADC INPUT 4",
+ [DA9052_ADC_ADCIN5] = "ADC INPUT 5",
+ [DA9052_ADC_ADCIN6] = "ADC INPUT 6",
+ [DA9052_ADC_TSI] = "TSI",
+ [DA9052_ADC_TJUNC] = "BATTERY JUNCTION TEMP",
+ [DA9052_ADC_VBBAT] = "BACK-UP BATTERY TEMP",
+};
+
+
+int da9052_manual_read(struct da9052 *da9052,
+ unsigned char channel)
+{
+ unsigned char man_timeout_cnt = DA9052_ADC_MAX_MANCONV_RETRY_COUNT;
+ struct da9052_ssc_msg msg;
+ unsigned short calc_data;
+ unsigned int ret;
+ u16 data = 0;
+
+ msg.addr = DA9052_ADCMAN_REG;
+ msg.data = channel;
+ msg.data = (msg.data | DA9052_ADCMAN_MANCONV);
+
+ mutex_lock(&da9052->manconv_lock);
+ da9052_lock(da9052);
+
+ ret = da9052->write(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+
+ do {
+ msg.addr = DA9052_ADCCONT_REG;
+ msg.data = 0;
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+
+ if (DA9052_ADCCONT_ADCMODE & msg.data)
+ msleep(1);
+ else
+ msleep(10);
+
+ msg.addr = DA9052_ADCMAN_REG;
+ msg.data = 0;
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+
+ man_timeout_cnt--;
+ if (man_timeout_cnt == 1) {
+ if (!(msg.data & DA9052_ADCMAN_MANCONV))
+ break;
+ else
+ goto err_ssc_comm;
+ }
+ } while (msg.data & DA9052_ADCMAN_MANCONV);
+
+ msg.addr = DA9052_ADCRESH_REG;
+ msg.data = 0;
+
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+
+ calc_data = (unsigned short)msg.data;
+ data = (calc_data << 2);
+
+ msg.addr = DA9052_ADCRESL_REG;
+ msg.data = 0;
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+
+ calc_data = (unsigned short)msg.data & 0x0003;
+ data |= calc_data;
+
+ mutex_unlock(&da9052->manconv_lock);
+
+ return data;
+err_ssc_comm:
+ mutex_unlock(&da9052->manconv_lock);
+ da9052_unlock(da9052);
+ return -EIO;
+}
+EXPORT_SYMBOL(da9052_manual_read);
+
+int da9052_read_tjunc(struct da9052 *da9052, char *buf)
+{
+ struct da9052_ssc_msg msg;
+ unsigned char temp;
+ int ret;
+
+ msg.addr = DA9052_TJUNCRES_REG;
+ msg.data = 0;
+
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+
+ temp = msg.data;
+
+ msg.addr = DA9052_TOFFSET_REG;
+ msg.data = 0;
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+
+ temp = (temp - msg.data);
+ *buf = temp;
+ return 0;
+err_ssc_comm:
+ da9052_unlock(da9052);
+ return -EIO;
+}
+EXPORT_SYMBOL(da9052_read_tjunc);
+
+int da9052_read_tbat_ich(struct da9052 *da9052, char *data, int channel_no)
+{
+ struct da9052_ssc_msg msg;
+ int ret;
+
+ switch (channel_no) {
+ case DA9052_ADC_TBAT:
+ msg.addr = DA9052_TBATRES_REG;
+ break;
+ case DA9052_ADC_ICH:
+ msg.addr = DA9052_ICHGAV_REG;
+ break;
+ default:
+ return -EINVAL;
+ }
+ msg.data = 0;
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+ *data = msg.data;
+ return 0;
+
+err_ssc_comm:
+ da9052_unlock(da9052);
+ return ret;
+}
+EXPORT_SYMBOL(da9052_read_tbat_ich);
+
+static int da9052_start_adc(struct da9052 *da9052, unsigned channel)
+{
+ struct da9052_ssc_msg msg;
+ int ret;
+
+ msg.addr = DA9052_ADCCONT_REG;
+ msg.data = 0;
+
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+
+ if (channel == DA9052_ADC_VDDOUT)
+ msg.data = (msg.data | DA9052_ADCCONT_AUTOVDDEN);
+ else if (channel == DA9052_ADC_ADCIN4)
+ msg.data = (msg.data | DA9052_ADCCONT_AUTOAD4EN);
+ else if (channel == DA9052_ADC_ADCIN5)
+ msg.data = (msg.data | DA9052_ADCCONT_AUTOAD5EN);
+ else if (channel == DA9052_ADC_ADCIN6)
+ msg.data = (msg.data | DA9052_ADCCONT_AUTOAD6EN);
+ else
+ return -EINVAL;
+
+ ret = da9052->write(da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+ return 0;
+
+err_ssc_comm:
+ da9052_unlock(da9052);
+ return -EIO;
+}
+
+static int da9052_stop_adc(struct da9052 *da9052, unsigned channel)
+{
+ int ret;
+ struct da9052_ssc_msg msg;
+
+ msg.addr = DA9052_ADCCONT_REG;
+ msg.data = 0;
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+
+ if (channel == DA9052_ADC_VDDOUT)
+ msg.data = (msg.data & ~(DA9052_ADCCONT_AUTOVDDEN));
+ else if (channel == DA9052_ADC_ADCIN4)
+ msg.data = (msg.data & ~(DA9052_ADCCONT_AUTOAD4EN));
+ else if (channel == DA9052_ADC_ADCIN5)
+ msg.data = (msg.data & ~(DA9052_ADCCONT_AUTOAD5EN));
+ else if (channel == DA9052_ADC_ADCIN6)
+ msg.data = (msg.data & ~(DA9052_ADCCONT_AUTOAD6EN));
+ else
+ return -EINVAL;
+
+ ret = da9052->write(da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+
+ return 0;
+err_ssc_comm:
+ da9052_unlock(da9052);
+ return -EIO;
+}
+
+static ssize_t da9052_adc_read_start_stop(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct da9052_adc_priv *priv = platform_get_drvdata(pdev);
+ struct da9052_ssc_msg msg;
+ int channel = to_sensor_dev_attr(devattr)->index;
+ int ret;
+
+ ret = da9052_start_adc(priv->da9052, channel);
+ if (ret < 0)
+ return ret;
+
+ switch (channel) {
+ case DA9052_ADC_VDDOUT:
+ msg.addr = DA9052_VDDRES_REG;
+ break;
+#if (DA9052_ADC_CONF_ADC4 == 1)
+ case DA9052_ADC_ADCIN4:
+ msg.addr = DA9052_ADCIN4RES_REG;
+ break;
+#endif
+#if (DA9052_ADC_CONF_ADC5 == 1)
+ case DA9052_ADC_ADCIN5:
+ msg.addr = DA9052_ADCIN5RES_REG;
+ break;
+#endif
+#if (DA9052_ADC_CONF_ADC6 == 1)
+ case DA9052_ADC_ADCIN6:
+ msg.addr = DA9052_ADCIN6RES_REG;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+ msg.data = 0;
+ da9052_lock(priv->da9052);
+ ret = priv->da9052->read(priv->da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+ da9052_unlock(priv->da9052);
+
+ ret = da9052_stop_adc(priv->da9052, channel);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", msg.data);
+
+err_ssc_comm:
+ da9052_unlock(priv->da9052);
+ return ret;
+}
+
+static ssize_t da9052_adc_read_ich(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct da9052_adc_priv *priv = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = da9052_read_tbat_ich(priv->da9052, buf, DA9052_ADC_ICH);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%u\n", *buf);
+}
+
+static ssize_t da9052_adc_read_tbat(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct da9052_adc_priv *priv = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = da9052_read_tbat_ich(priv->da9052, buf, DA9052_ADC_TBAT);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%u\n", *buf);
+}
+
+static ssize_t da9052_adc_read_vbat(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct da9052_adc_priv *priv = platform_get_drvdata(pdev);
+ s32 ret;
+
+ ret = da9052_manual_read(priv->da9052, DA9052_ADC_VBAT);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%u\n", ret);
+}
+
+static ssize_t da9052_adc_read_tjunc(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct da9052_adc_priv *priv = platform_get_drvdata(pdev);
+ int ret;
+ ret = da9052_read_tjunc(priv->da9052, buf);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%u\n", *buf);
+}
+
+static ssize_t da9052_adc_read_vbbat(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct da9052_adc_priv *priv = platform_get_drvdata(pdev);
+ s32 ret;
+
+ ret = da9052_manual_read(priv->da9052, DA9052_ADC_VBBAT);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%u\n", ret);
+}
+
+static int da9052_adc_hw_init(struct da9052 *da9052)
+{
+ struct da9052_ssc_msg msg;
+ int ret;
+
+#if (DA9052_ADC_CONF_ADC4 == 1)
+ msg.addr = DA9052_GPIO0001_REG;
+ msg.data = 0;
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+
+ msg.data = (msg.data & ~(DA9052_GPIO0001_GPIO0PIN));
+ ret = da9052->write(da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+#endif
+
+#if (DA9052_ADC_CONF_ADC5 == 1)
+ msg.addr = DA9052_GPIO0001_REG;
+ msg.data = 0;
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+
+ msg.data = (msg.data & ~(DA9052_GPIO0001_GPIO0PIN));
+ ret = da9052->write(da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+#endif
+
+#if (DA9052_ADC_CONF_ADC6 == 1)
+ msg.addr = DA9052_GPIO0203_REG;
+ msg.data = 0;
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret)
+ goto err_ssc_comm;
+
+ msg.data = (msg.data & ~(DA9052_GPIO0203_GPIO2PIN));
+ ret = da9052->write(da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+#endif
+
+ msg.addr = DA9052_ADCCONT_REG;
+ msg.data = 0;
+ da9052_lock(da9052);
+ ret = da9052->read(da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+
+ msg.data = (msg.data & (DA9052_ADCCONT_ADCMODE));
+ ret = da9052->write(da9052, &msg);
+ if (ret != 0)
+ goto err_ssc_comm;
+ da9052_unlock(da9052);
+
+ return 0;
+err_ssc_comm:
+ da9052_unlock(da9052);
+ return -EIO;
+}
+
+static ssize_t da9052_adc_show_name(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "da9052-adc\n");
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int channel = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%s\n", input_names[channel]);
+}
+#define DA9052_ADC_CHANNELS(id, name) \
+ static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
+ NULL, name)
+
+DA9052_ADC_CHANNELS(0, DA9052_ADC_VDDOUT);
+DA9052_ADC_CHANNELS(1, DA9052_ADC_ICH);
+DA9052_ADC_CHANNELS(2, DA9052_ADC_TBAT);
+DA9052_ADC_CHANNELS(3, DA9052_ADC_VBAT);
+#if (DA9052_ADC_CONF_ADC4 == 1)
+DA9052_ADC_CHANNELS(4, DA9052_ADC_ADCIN4);
+#endif
+#if (DA9052_ADC_CONF_ADC5 == 1)
+DA9052_ADC_CHANNELS(5, DA9052_ADC_ADCIN5);
+#endif
+#if (DA9052_ADC_CONF_ADC6 == 1)
+DA9052_ADC_CHANNELS(6, DA9052_ADC_ADCIN6);
+#endif
+DA9052_ADC_CHANNELS(7, DA9052_ADC_TSI);
+DA9052_ADC_CHANNELS(8, DA9052_ADC_TJUNC);
+DA9052_ADC_CHANNELS(9, DA9052_ADC_VBBAT);
+
+
+static DEVICE_ATTR(name, S_IRUGO, da9052_adc_show_name, NULL);
+static SENSOR_DEVICE_ATTR(read_vddout, S_IRUGO,
+ da9052_adc_read_start_stop, NULL,
+ DA9052_ADC_VDDOUT);
+static SENSOR_DEVICE_ATTR(read_ich, S_IRUGO, da9052_adc_read_ich, NULL,
+ DA9052_ADC_ICH);
+static SENSOR_DEVICE_ATTR(read_tbat, S_IRUGO, da9052_adc_read_tbat, NULL,
+ DA9052_ADC_TBAT);
+static SENSOR_DEVICE_ATTR(read_vbat, S_IRUGO, da9052_adc_read_vbat, NULL,
+ DA9052_ADC_VBAT);
+#if (DA9052_ADC_CONF_ADC4 == 1)
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, da9052_adc_read_start_stop, NULL,
+ DA9052_ADC_ADCIN4);
+#endif
+#if (DA9052_ADC_CONF_ADC5 == 1)
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, da9052_adc_read_start_stop, NULL,
+ DA9052_ADC_ADCIN5);
+#endif
+#if (DA9052_ADC_CONF_ADC6 == 1)
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, da9052_adc_read_start_stop, NULL,
+ DA9052_ADC_ADCIN6);
+#endif
+static SENSOR_DEVICE_ATTR(read_tjunc, S_IRUGO, da9052_adc_read_tjunc, NULL,
+ DA9052_ADC_TJUNC);
+static SENSOR_DEVICE_ATTR(read_vbbat, S_IRUGO, da9052_adc_read_vbbat, NULL,
+ DA9052_ADC_VBBAT);
+
+static struct attribute *da9052_attr[] = {
+ &dev_attr_name.attr,
+ &sensor_dev_attr_read_vddout.dev_attr.attr,
+ &sensor_dev_attr_in0_label.dev_attr.attr,
+ &sensor_dev_attr_read_ich.dev_attr.attr,
+ &sensor_dev_attr_in1_label.dev_attr.attr,
+ &sensor_dev_attr_read_tbat.dev_attr.attr,
+ &sensor_dev_attr_in2_label.dev_attr.attr,
+ &sensor_dev_attr_read_vbat.dev_attr.attr,
+ &sensor_dev_attr_in3_label.dev_attr.attr,
+#if (DA9052_ADC_CONF_ADC4 == 1)
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_label.dev_attr.attr,
+#endif
+#if (DA9052_ADC_CONF_ADC5 == 1)
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_label.dev_attr.attr,
+#endif
+#if (DA9052_ADC_CONF_ADC6 == 1)
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in6_label.dev_attr.attr,
+#endif
+ &sensor_dev_attr_in7_label.dev_attr.attr,
+ &sensor_dev_attr_read_tjunc.dev_attr.attr,
+ &sensor_dev_attr_in8_label.dev_attr.attr,
+ &sensor_dev_attr_read_vbbat.dev_attr.attr,
+ &sensor_dev_attr_in9_label.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group da9052_group = {
+ .attrs = da9052_attr,
+};
+
+static int __init da9052_adc_probe(struct platform_device *pdev)
+{
+ struct da9052_adc_priv *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->da9052 = dev_get_drvdata(pdev->dev.parent);
+
+ platform_set_drvdata(pdev, priv);
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &da9052_group);
+ if (ret)
+ goto out_err_create1;
+
+ priv->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(priv->hwmon_dev)) {
+ ret = PTR_ERR(priv->hwmon_dev);
+ goto out_err_create2;
+ }
+
+ da9052_adc_hw_init(priv->da9052);
+
+ mutex_init(&priv->da9052->manconv_lock);
+
+ return 0;
+
+out_err_create2:
+ sysfs_remove_group(&pdev->dev.kobj, &da9052_group);
+out_err_create1:
+ platform_set_drvdata(pdev, NULL);
+ kfree(priv);
+
+ return ret;
+}
+
+static int __devexit da9052_adc_remove(struct platform_device *pdev)
+{
+ struct da9052_adc_priv *priv = platform_get_drvdata(pdev);
+
+ mutex_destroy(&priv->da9052->manconv_lock);
+
+ hwmon_device_unregister(priv->hwmon_dev);
+
+ sysfs_remove_group(&pdev->dev.kobj, &da9052_group);
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(priv);
+
+ return 0;
+}
+
+static struct platform_driver da9052_adc_driver = {
+ .remove = __devexit_p(da9052_adc_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init da9052_adc_init(void)
+{
+ return platform_driver_probe(&da9052_adc_driver, da9052_adc_probe);
+}
+module_init(da9052_adc_init);
+
+static void __exit da9052_adc_exit(void)
+{
+ platform_driver_unregister(&da9052_adc_driver);
+}
+module_exit(da9052_adc_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@xxxxxxxxxxx>")
+MODULE_DESCRIPTION("DA9052 ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff -Naur linux-2.6.34-orig2/drivers/hwmon/Kconfig
linux-2.6.34/drivers/hwmon/Kconfig
--- linux-2.6.34-orig2/drivers/hwmon/Kconfig 2010-10-12 17:00:39.000000000 +0500
+++ linux-2.6.34/drivers/hwmon/Kconfig 2010-10-12 14:15:56.000000000 +0500
@@ -28,17 +28,6 @@
tristate
default n
-config HWMON_DEBUG_CHIP
- bool "Hardware Monitoring Chip debugging messages"
- default n
- help
- Say Y here if you want the I2C chip drivers to produce a bunch of
- debug messages to the system log. Select this if you are having
- a problem with I2C support and want to see more of what is going
- on.
-
-comment "Native drivers"
-
config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
depends on X86 && EXPERIMENTAL
@@ -170,16 +159,6 @@
This driver can also be built as a module. If so, the module
will be called adm9240.
-config SENSORS_ADT7411
- tristate "Analog Devices ADT7411"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes here you get support for the Analog Devices
- ADT7411 voltage and temperature monitoring chip.
-
- This driver can also be built as a module. If so, the module
- will be called adt7411.
-
config SENSORS_ADT7462
tristate "Analog Devices ADT7462"
depends on I2C && EXPERIMENTAL
@@ -200,30 +179,15 @@
This driver can also be built as a module. If so, the module
will be called adt7470.
-config SENSORS_ADT7475
- tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
+config SENSORS_ADT7473
+ tristate "Analog Devices ADT7473"
depends on I2C && EXPERIMENTAL
- select HWMON_VID
help
If you say yes here you get support for the Analog Devices
- ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
- chips.
+ ADT7473 temperature monitoring chips.
- This driver can also be build as a module. If so, the module
- will be called adt7475.
-
-config SENSORS_ASC7621
- tristate "Andigilog aSC7621"
- depends on HWMON && I2C
- help
- If you say yes here you get support for the aSC7621
- family of SMBus sensors chip found on most Intel X38, X48, X58,
- 945, 965 and 975 desktop boards. Currently supported chips:
- aSC7621
- aSC7621a
-
- This driver can also be built as a module. If so, the module
- will be called asc7621.
+ This driver can also be built as a module. If so, the module
+ will be called adt7473.
config SENSORS_K8TEMP
tristate "AMD Athlon64/FX or Opteron temperature sensor"
@@ -237,18 +201,6 @@
This driver can also be built as a module. If so, the module
will be called k8temp.
-config SENSORS_K10TEMP
- tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
- depends on X86 && PCI
- help
- If you say yes here you get support for the temperature
- sensor(s) inside your CPU. Supported are later revisions of
- the AMD Family 10h and all revisions of the AMD Family 11h
- microarchitectures.
-
- This driver can also be built as a module. If so, the module
- will be called k10temp.
-
config SENSORS_AMS
tristate "Apple Motion Sensor driver"
depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) ||
(ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
@@ -300,6 +252,13 @@
This driver can also be built as a module. If so, the module
will be called atxp1.
+config SENSORS_DA9052
+ tristate "Dialog DA9052 HWMon"
+ depends on PMIC_DA9052
+ help
+ Say y here to support the ADC found on
+ Dialog Semiconductor DA9052 PMIC.
+
config SENSORS_DS1621
tristate "Dallas Semiconductor DS1621 and DS1625"
depends on I2C
@@ -332,12 +291,11 @@
will be called f71805f.
config SENSORS_F71882FG
- tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
+ tristate "Fintek F71882FG and F71883FG"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
- F71889FG and F8000 Super-I/O chips.
+ features of the Fintek F71882FG and F71883FG Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71882fg.
@@ -352,31 +310,39 @@
This driver can also be built as a module. If so, the module
will be called f75375s.
-config SENSORS_FSCHMD
- tristate "Fujitsu Siemens Computers sensor chips"
+config SENSORS_FSCHER
+ tristate "FSC Hermes"
depends on X86 && I2C
help
- If you say yes here you get support for the following Fujitsu
- Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
- Heimdall, Heracles, Hades and Syleus including support for the
- integrated watchdog.
+ If you say yes here you get support for Fujitsu Siemens
+ Computers Hermes sensor chips.
- This is a merged driver for FSC sensor chips replacing the fscpos,
- fscscy and fscher drivers and adding support for several other FSC
- sensor chips.
+ This driver can also be built as a module. If so, the module
+ will be called fscher.
+
+config SENSORS_FSCPOS
+ tristate "FSC Poseidon"
+ depends on X86 && I2C
+ help
+ If you say yes here you get support for Fujitsu Siemens
+ Computers Poseidon sensor chips.
This driver can also be built as a module. If so, the module
- will be called fschmd.
+ will be called fscpos.
-config SENSORS_G760A
- tristate "GMT G760A"
- depends on I2C
+config SENSORS_FSCHMD
+ tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
+ depends on X86 && I2C && EXPERIMENTAL
help
- If you say yes here you get support for Global Mixed-mode
- Technology Inc G760A fan speed PWM controller chips.
+ If you say yes here you get support for various Fujitsu Siemens
+ Computers sensor chips.
+
+ This is a new merged driver for FSC sensor chips which is intended
+ as a replacment for the fscpos, fscscy and fscher drivers and adds
+ support for several other FCS sensor chips.
This driver can also be built as a module. If so, the module
- will be called g760a.
+ will be called fschmd.
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
@@ -400,12 +366,12 @@
will be called gl520sm.
config SENSORS_CORETEMP
- tristate "Intel Core/Core2/Atom temperature sensor"
- depends on X86 && PCI && EXPERIMENTAL
+ tristate "Intel Core (2) Duo/Solo temperature sensor"
+ depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the temperature
- sensor inside your CPU. Most of the family 6 CPUs
- are supported. Check documentation/driver for details.
+ sensor inside your CPU. Supported all are all known variants
+ of Intel Core family.
config SENSORS_IBMAEM
tristate "IBM Active Energy Manager temperature/power sensors and control"
@@ -416,7 +382,7 @@
power sensors and capping hardware in various IBM System X
servers that support Active Energy Manager. This includes
the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
- and certain HC10/HS2x/LS2x/QS2x blades.
+ and certain HS2x/LS2x/QS2x blades.
This driver can also be built as a module. If so, the module
will be called ibmaem.
@@ -440,8 +406,7 @@
select HWMON_VID
help
If you say yes here you get support for ITE IT8705F, IT8712F,
- IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the
- SiS960 clone.
+ IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
This driver can also be built as a module. If so, the module
will be called it87.
@@ -459,25 +424,15 @@
will be called lm63.
config SENSORS_LM70
- tristate "National Semiconductor LM70 / Texas Instruments TMP121"
+ tristate "National Semiconductor LM70"
depends on SPI_MASTER && EXPERIMENTAL
help
If you say yes here you get support for the National Semiconductor
- LM70 and Texas Instruments TMP121/TMP123 digital temperature
- sensor chips.
+ LM70 digital temperature sensor chip.
This driver can also be built as a module. If so, the module
will be called lm70.
-config SENSORS_LM73
- tristate "National Semiconductor LM73"
- depends on I2C
- help
- If you say yes here you get support for National Semiconductor LM73
- sensor chips.
- This driver can also be built as a module. If so, the module
- will be called lm73.
-
config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
depends on I2C
@@ -572,10 +527,9 @@
depends on I2C
help
If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
- MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
- MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG
- sensor chips.
+ LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+ MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
+ MAX6681 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
@@ -601,37 +555,6 @@
This driver can also be built as a module. If so, the module
will be called lm93.
-config SENSORS_LTC4215
- tristate "Linear Technology LTC4215"
- depends on I2C && EXPERIMENTAL
- default n
- help
- If you say yes here you get support for Linear Technology LTC4215
- Hot Swap Controller I2C interface.
-
- This driver can also be built as a module. If so, the module will
- be called ltc4215.
-
-config SENSORS_LTC4245
- tristate "Linear Technology LTC4245"
- depends on I2C && EXPERIMENTAL
- default n
- help
- If you say yes here you get support for Linear Technology LTC4245
- Multiple Supply Hot Swap Controller I2C interface.
-
- This driver can also be built as a module. If so, the module will
- be called ltc4245.
-
-config SENSORS_LM95241
- tristate "National Semiconductor LM95241 sensor chip"
- depends on I2C
- help
- If you say yes here you get support for LM95241 sensor chip.
-
- This driver can also be built as a module. If so, the module
- will be called lm95241.
-
config SENSORS_MAX1111
tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
depends on SPI_MASTER
@@ -686,47 +609,6 @@
This driver can also be built as a module. If so, the module
will be called pc87427.
-config SENSORS_PCF8591
- tristate "Philips PCF8591 ADC/DAC"
- depends on I2C
- default n
- help
- If you say yes here you get support for Philips PCF8591 4-channel
- ADC, 1-channel DAC chips.
-
- This driver can also be built as a module. If so, the module
- will be called pcf8591.
-
- These devices are hard to detect and rarely found on mainstream
- hardware. If unsure, say N.
-
-config SENSORS_SHT15
- tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
- depends on GENERIC_GPIO
- help
- If you say yes here you get support for the Sensiron SHT10, SHT11,
- SHT15, SHT71, SHT75 humidity and temperature sensors.
-
- This driver can also be built as a module. If so, the module
- will be called sht15.
-
-config SENSORS_S3C
- tristate "S3C24XX/S3C64XX Inbuilt ADC"
- depends on ARCH_S3C2410
- help
- If you say yes here you get support for the on-board ADCs of
- the Samsung S3C24XX or S3C64XX series of SoC
-
- This driver can also be built as a module. If so, the module
- will be called s3c-hwmo.
-
-config SENSORS_S3C_RAW
- bool "Include raw channel attributes in sysfs"
- depends on SENSORS_S3C
- help
- Say Y here if you want to include raw copies of all the ADC
- channels in sysfs.
-
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on PCI
@@ -802,16 +684,6 @@
This driver can also be built as a module. If so, the module
will be called ads7828.
-config SENSORS_AMC6821
- tristate "Texas Instruments AMC6821"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes here you get support for the Texas Instruments
- AMC6821 hardware monitoring chips.
-
- This driver can also be build as a module. If so, the module
- will be called amc6821.
-
config SENSORS_THMC50
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
depends on I2C && EXPERIMENTAL
@@ -822,34 +694,6 @@
This driver can also be built as a module. If so, the module
will be called thmc50.
-config SENSORS_TMP401
- tristate "Texas Instruments TMP401 and compatibles"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes here you get support for Texas Instruments TMP401 and
- TMP411 temperature sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called tmp401.
-
-config SENSORS_TMP421
- tristate "Texas Instruments TMP421 and compatible"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes here you get support for Texas Instruments TMP421,
- TMP422 and TMP423 temperature sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called tmp421.
-
-config SENSORS_VIA_CPUTEMP
- tristate "VIA CPU temperature sensor"
- depends on X86
- help
- If you say yes here you get support for the temperature
- sensor inside your CPU. Supported are all known variants of
- the VIA C7 and Nano.
-
config SENSORS_VIA686A
tristate "VIA686A"
depends on PCI
@@ -896,7 +740,7 @@
config SENSORS_W83791D
tristate "Winbond W83791D"
- depends on I2C
+ depends on I2C && EXPERIMENTAL
select HWMON_VID
help
If you say yes here you get support for the Winbond W83791D chip.
@@ -919,8 +763,7 @@
select HWMON_VID
help
If you say yes here you get support for the Winbond W83793
- hardware monitoring chip, including support for the integrated
- watchdog.
+ hardware monitoring chip.
This driver can also be built as a module. If so, the module
will be called w83793.
@@ -958,7 +801,7 @@
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
+ tristate "Winbond W83627EHF/DHG"
select HWMON_VID
help
If you say yes here you get support for the hardware
@@ -969,32 +812,9 @@
chip suited for specific Intel processors that use PECI such as
the Core 2 Duo.
- This driver also supports the W83667HG chip.
-
This driver can also be built as a module. If so, the module
will be called w83627ehf.
-config SENSORS_WM831X
- tristate "WM831x PMICs"
- depends on MFD_WM831X
- help
- If you say yes here you get support for the hardware
- monitoring functionality of the Wolfson Microelectronics
- WM831x series of PMICs.
-
- This driver can also be built as a module. If so, the module
- will be called wm831x-hwmon.
-
-config SENSORS_WM8350
- tristate "Wolfson Microelectronics WM835x"
- depends on MFD_WM8350
- help
- If you say yes here you get support for the hardware
- monitoring features of the WM835x series of PMICs.
-
- This driver can also be built as a module. If so, the module
- will be called wm8350-hwmon.
-
config SENSORS_ULTRA45
tristate "Sun Ultra45 PIC16F747"
depends on SPARC64
@@ -1022,39 +842,24 @@
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
-config SENSORS_LIS3_SPI
- tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
- depends on !ACPI && SPI_MASTER && INPUT
- select INPUT_POLLDEV
+config SENSORS_LIS3LV02D
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+ depends on ACPI && INPUT
default n
help
- This driver provides support for the LIS3LV02Dx accelerometer connected
- via SPI. The accelerometer data is readable via
+ This driver provides support for the LIS3LV02Dx accelerometer. In
+ particular, it can be found in a number of HP laptops, which have the
+ "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+ systems the driver should load automatically (via ACPI). The
+ accelerometer might also be found in other systems, connected via SPI
+ or I2C. The accelerometer data is readable via
/sys/devices/platform/lis3lv02d.
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
- This driver can also be built as modules. If so, the core module
- will be called lis3lv02d and a specific module for the SPI transport
- is called lis3lv02d_spi.
-
-config SENSORS_LIS3_I2C
- tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
- depends on I2C && INPUT
- select INPUT_POLLDEV
- default n
- help
- This driver provides support for the LIS3LV02Dx accelerometer connected
- via I2C. The accelerometer data is readable via
- /sys/devices/platform/lis3lv02d.
-
- This driver also provides an absolute input class device, allowing
- the device to act as a pinball machine-esque joystick.
-
- This driver can also be built as modules. If so, the core module
- will be called lis3lv02d and a specific module for the I2C transport
- is called lis3lv02d_i2c.
+ This driver can also be built as a module. If so, the module
+ will be called lis3lv02d.
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
@@ -1081,58 +886,13 @@
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
-config SENSORS_MC13783_ADC
- tristate "Freescale MC13783 ADC"
- depends on MFD_MC13783
- help
- Support for the A/D converter on MC13783 PMIC.
-
-if ACPI
-
-comment "ACPI drivers"
-
-config SENSORS_ATK0110
- tristate "ASUS ATK0110"
- depends on X86 && EXPERIMENTAL
- help
- If you say yes here you get support for the ACPI hardware
- monitoring interface found in many ASUS motherboards. This
- driver will provide readings of fans, voltages and temperatures
- through the system firmware.
-
- This driver can also be built as a module. If so, the module
- will be called asus_atk0110.
-
-config SENSORS_LIS3LV02D
- tristate "STMicroeletronics LIS3* three-axis digital accelerometer"
- depends on INPUT
- select INPUT_POLLDEV
- select NEW_LEDS
- select LEDS_CLASS
+config HWMON_DEBUG_CHIP
+ bool "Hardware Monitoring Chip debugging messages"
default n
help
- This driver provides support for the LIS3* accelerometers, such as the
- LIS3LV02DL or the LIS331DL. In particular, it can be found in a number
- of HP laptops, which have the "Mobile Data Protection System 3D" or
- "3D DriveGuard" feature. On such systems the driver should load
- automatically (via ACPI alias). The accelerometer might also be found
- in other systems, connected via SPI or I2C. The accelerometer data is
- readable via /sys/devices/platform/lis3lv02d.
-
- This driver also provides an absolute input class device, allowing
- a laptop to act as a pinball machine-esque joystick. It provides also
- a misc device which can be used to detect free-fall. On HP laptops,
- if the led infrastructure is activated, support for a led indicating
- disk protection will be provided as hp::hddprotect. For more
- information on the feature, refer to Documentation/hwmon/lis3lv02d.
-
- This driver can also be built as modules. If so, the core module
- will be called lis3lv02d and a specific module for HP laptops will be
- called hp_accel.
-
- Say Y here if you have an applicable laptop and want to experience
- the awesome power of lis3lv02d.
-
-endif # ACPI
+ Say Y here if you want the I2C chip drivers to produce a bunch of
+ debug messages to the system log. Select this if you are having
+ a problem with I2C support and want to see more of what is going
+ on.
endif # HWMON
diff -Naur linux-2.6.34-orig2/drivers/hwmon/Makefile
linux-2.6.34/drivers/hwmon/Makefile
--- linux-2.6.34-orig2/drivers/hwmon/Makefile 2010-10-12
17:00:29.000000000 +0500
+++ linux-2.6.34/drivers/hwmon/Makefile 2010-10-12 14:16:25.000000000 +0500
@@ -38,6 +38,7 @@
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
+obj-$(CONFIG_SENSORS_DA9052) += da9052-adc.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
diff -Naur linux-2.6.34-orig2/include/linux/mfd/da9052/adc.h
linux-2.6.34/include/linux/mfd/da9052/adc.h
--- linux-2.6.34-orig2/include/linux/mfd/da9052/adc.h 1970-01-01
05:00:00.000000000 +0500
+++ linux-2.6.34/include/linux/mfd/da9052/adc.h 2010-10-12
09:55:03.000000000 +0500
@@ -0,0 +1,66 @@
+/*
+ * da9052 ADC module declarations.
+ *
+ * Copyright(c) 2009 Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_DA9052_ADC_H
+#define __LINUX_MFD_DA9052_ADC_H
+
+#include "gpio.h"
+
+#define DA9052_ADC_DEVICE_NAME "da9052_adc"
+
+/* Channel Definations */
+#define DA9052_ADC_VDDOUT 0
+#define DA9052_ADC_ICH 1
+#define DA9052_ADC_TBAT 2
+#define DA9052_ADC_VBAT 3
+#define DA9052_ADC_ADCIN4 4
+#define DA9052_ADC_ADCIN5 5
+#define DA9052_ADC_ADCIN6 6
+#define DA9052_ADC_TSI 7
+#define DA9052_ADC_TJUNC 8
+#define DA9052_ADC_VBBAT 9
+
+#if (DA9052_GPIO_PIN_0 == DA9052_GPIO_CONFIG_ADC)
+#define DA9052_ADC_CONF_ADC4 1
+#else
+#define DA9052_ADC_CONF_ADC4 0
+#endif
+#if (DA9052_GPIO_PIN_1 == DA9052_GPIO_CONFIG_ADC)
+#define DA9052_ADC_CONF_ADC5 1
+#else
+#define DA9052_ADC_CONF_ADC5 0
+#endif
+#if (DA9052_GPIO_PIN_2 == DA9052_GPIO_CONFIG_ADC)
+#define DA9052_ADC_CONF_ADC6 1
+#else
+#define DA9052_ADC_CONF_ADC6 0
+#endif
+
+/* Maximum retry count to check manual conversion over */
+#define DA9052_ADC_MAX_MANCONV_RETRY_COUNT 8
+
+struct da9052_adc_priv {
+ struct da9052 *da9052;
+ struct device *hwmon_dev;
+ struct mutex manconv_lock;
+};
+
+#endif /* __LINUX_MFD_DA9052_ADC_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/