[PATCH 4/5 v2] Fix CI code for NetUP Dual DVB-T/C CI RF card

[Abylay Ospan]

CI reset takes several seconds on some CAM,
so there is no need to lock mutex all that time.
Also we need not to preserve CI's reset bits in
CIBUSCTRL register, they are handled automatically by FPGA.
Set it to 0 explicitly in order to not reset wrong CAM.

Signed-off-by: Abylay Ospan <aospan@xxxxxxxx>
---
 drivers/media/video/cx23885/altera-ci.c |   14 ++++++++++----
 1 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/media/video/cx23885/altera-ci.c 
b/drivers/media/video/cx23885/altera-ci.c
index e2c9fee..aa67a33 100644
--- a/drivers/media/video/cx23885/altera-ci.c
+++ b/drivers/media/video/cx23885/altera-ci.c
@@ -283,7 +283,7 @@ int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, 
int slot,
 	netup_fpga_op_rw(inter, NETUP_CI_ADDR1, ((addr >> 7) & 0x7f), 0);
 	store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
 -	store &= 0x3f;
+	store &= 0x0f;
 	store |= ((state->nr << 7) | (flag << 6));
  	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, store, 0);
@@ -340,19 +340,25 @@ int netup_ci_slot_reset(struct dvb_ca_en50221 
*en50221, int slot)
  	ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
 	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL,
-				ret | (1 << (5 - state->nr)), 0);
+				(ret & 0xcf) | (1 << (5 - state->nr)), 0);
+
+	mutex_unlock(&inter->fpga_mutex);
  	for (;;) {
 		mdelay(50);
+
+		mutex_lock(&inter->fpga_mutex);
+
 		ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL,
 						0, NETUP_CI_FLG_RD);
+		mutex_unlock(&inter->fpga_mutex);
+
 		if ((ret & (1 << (5 - state->nr))) == 0)
 			break;
 		if (time_after(jiffies, t_out))
 			break;
 	}
 -	mutex_unlock(&inter->fpga_mutex);
  	printk("%s: %d msecs\n", __func__,
 		jiffies_to_msecs(jiffies + msecs_to_jiffies(9999) - t_out));
@@ -381,7 +387,7 @@ int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 
*en50221, int slot)
  	ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
 	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL,
-				ret | (1 << (3 - state->nr)), 0);
+				(ret & 0x0f) | (1 << (3 - state->nr)), 0);
  	mutex_unlock(&inter->fpga_mutex);
 -- 1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/