Re: [PATCH 3/5] powerpc/5200: dts: remove unused properties

[Grant Likely]

On Wed, Nov 17, 2010 at 03:28:39PM -0800, John Bonesio wrote:
> This patch remove unused properties in dts files in preparation of refactoring
> the dts files for MPC5200b based boards.
> 
> Signed-off-by: John Bonesio <bones@xxxxxxxxxxxx>

Applied, thanks.

g.

> ---
> 
>  arch/powerpc/boot/dts/cm5200.dts    |    2 --
>  arch/powerpc/boot/dts/lite5200b.dts |    3 ---
>  arch/powerpc/boot/dts/media5200.dts |    2 --
>  arch/powerpc/boot/dts/motionpro.dts |    2 --
>  arch/powerpc/boot/dts/pcm030.dts    |    2 --
>  arch/powerpc/boot/dts/pcm032.dts    |    2 --
>  6 files changed, 0 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
> index 9369dcd..d549897 100644
> --- a/arch/powerpc/boot/dts/cm5200.dts
> +++ b/arch/powerpc/boot/dts/cm5200.dts
> @@ -230,8 +230,6 @@
>  			reg = <0 0 0x2000000>;
>  			bank-width = <2>;
>  			device-width = <2>;
> -			#size-cells = <1>;
> -			#address-cells = <1>;
>  		};
>  	};
>  };
> diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
> index a74b790..c0a4e45 100644
> --- a/arch/powerpc/boot/dts/lite5200b.dts
> +++ b/arch/powerpc/boot/dts/lite5200b.dts
> @@ -174,7 +174,6 @@
>  
>  		psc@2000 {		// PSC1
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			cell-index = <0>;
>  			reg = <0x2000 0x100>;
>  			interrupts = <2 1 0>;
>  		};
> @@ -198,7 +197,6 @@
>  		// PSC4 in uart mode example
>  		//serial@2600 {		// PSC4
>  		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -		//	cell-index = <3>;
>  		//	reg = <0x2600 0x100>;
>  		//	interrupts = <2 11 0>;
>  		//};
> @@ -206,7 +204,6 @@
>  		// PSC5 in uart mode example
>  		//serial@2800 {		// PSC5
>  		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -		//	cell-index = <4>;
>  		//	reg = <0x2800 0x100>;
>  		//	interrupts = <2 12 0>;
>  		//};
> diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
> index a70ef68..e027f45 100644
> --- a/arch/powerpc/boot/dts/media5200.dts
> +++ b/arch/powerpc/boot/dts/media5200.dts
> @@ -185,8 +185,6 @@
>  		// PSC6 in uart mode
>  		console: psc@2c00 {		// PSC6
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			cell-index = <5>;
> -			port-number = <0>;  // Logical port assignment
>  			reg = <0x2c00 0x100>;
>  			interrupts = <2 4 0>;
>  		};
> diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
> index f6261ea..3ab4666 100644
> --- a/arch/powerpc/boot/dts/motionpro.dts
> +++ b/arch/powerpc/boot/dts/motionpro.dts
> @@ -277,8 +277,6 @@
>  			reg = <0 0 0x01000000>;
>  			bank-width = <2>;
>  			device-width = <2>;
> -			#size-cells = <1>;
> -			#address-cells = <1>;
>  		};
>  	};
>  };
> diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
> index 3a4f554..f3e30bb 100644
> --- a/arch/powerpc/boot/dts/pcm030.dts
> +++ b/arch/powerpc/boot/dts/pcm030.dts
> @@ -196,7 +196,6 @@
>  
>  		psc@2400 { /* PSC3 in UART mode */
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			cell-index = <2>;
>  			reg = <0x2400 0x100>;
>  			interrupts = <2 3 0>;
>  		};
> @@ -207,7 +206,6 @@
>  
>  		psc@2c00 { /* PSC6 in UART mode */
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			cell-index = <5>;
>  			reg = <0x2c00 0x100>;
>  			interrupts = <2 4 0>;
>  		};
> diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
> index 17596c7..e0f2702 100644
> --- a/arch/powerpc/boot/dts/pcm032.dts
> +++ b/arch/powerpc/boot/dts/pcm032.dts
> @@ -196,7 +196,6 @@
>  
>  		psc@2400 { /* PSC3 in UART mode */
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			cell-index = <2>;
>  			reg = <0x2400 0x100>;
>  			interrupts = <2 3 0>;
>  		};
> @@ -207,7 +206,6 @@
>  
>  		psc@2c00 { /* PSC6 in UART mode */
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			cell-index = <5>;
>  			reg = <0x2c00 0x100>;
>  			interrupts = <2 4 0>;
>  		};
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/