Re: panic in tg3 driver

From: Stephen Clark
Date: Tue Jan 04 2011 - 15:23:48 EST


On 01/04/2011 09:54 AM, Stephen Clark wrote:
Hello,


The hardware is an Acrosser AR-M0898B micro box.
lspci
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0f.0 IDE interface: VIA Technologies, Inc. VT8251 Serial ATA Controller (rev
20)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/
C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 91)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 91)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 91)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 91)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:13.0 Host bridge: VIA Technologies, Inc. VT8251 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
02:08.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 02)
02:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 02)
80:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
80:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
81:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet
PCI Express (rev 02)
82:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet
PCI Express (rev 02)

Kernel 2.6.36-2.el5.elrepo on an i686

When I try to ifconfig either of the BCM5906M ports the system panics.

Ideas, fixes ?

[root@Z1010 ~]# modprobe tg3
[root@Z1010 ~]# ifconfig eth2 2.2.2.2/24
------------[ cut here ]------------
kernel BUG at drivers/net/tg3.c:4365!
invalid opcode: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/class/net/eth3/address
Modules linked in: tg3 xt_tcpudp ipt_LOG xt_limit xt_state iptable_mangle af_ke]

Pid: 20303, comm: kworker/0:2 Not tainted 2.6.36-2.el5.elrepo #1 CN700-8251/
EIP: 0060:[<e1c62f19>] EFLAGS: 00010202 CPU: 0
EIP is at tg3_tx_recover+0x1e/0x53 [tg3]
EAX: deece4c0 EBX: dfa9c000 ECX: deece4c0 EDX: ffffffff
ESI: deece4c0 EDI: deece500 EBP: c1801f38 ESP: c1801f30
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process kworker/0:2 (pid: 20303, ti=c1801000 task=df0105d0 task.ti=dee62000)
Stack:
dfa9c000 00000000 c1801f6c e1c630be c1801f6c deece4c0 00000840 00000000
<0> df251cc0 00000005 00000000 df979800 deece500 deece4c0 00000040 c1801f94
<0> e1c661e5 00000000 00000040 c1801f88 e09df1d2 00000000 deece500 dfab4000
Call Trace:
[<e1c630be>] ? tg3_tx+0x157/0x1a2 [tg3]
[<e1c661e5>] ? tg3_poll_work+0x2b/0x10b [tg3]
[<e09df1d2>] ? ssb_write32+0x11/0x14 [b44]
[<e1c662f9>] ? tg3_poll+0x34/0x9a [tg3]
[<c0674058>] ? net_rx_action+0x7e/0x11c
[<c04409c9>] ? __do_softirq+0x85/0x10c
[<c0440944>] ? __do_softirq+0x0/0x10c
<IRQ>
[<c04404ef>] ? _local_bh_enable_ip+0x68/0x87
[<c044051b>] ? local_bh_enable_ip+0xd/0xf
[<c046593b>] ? __raw_spin_unlock_bh+0x1c/0x1e
[<c06fa4f2>] ? _raw_spin_unlock_bh+0xd/0xf
[<e1c6281f>] ? spin_unlock_bh+0xd/0xf [tg3]
[<e1c62cbe>] ? tg3_full_unlock+0x10/0x12 [tg3]
[<e1c664c7>] ? tg3_reset_task+0xd7/0xe3 [tg3]
[<c044ec37>] ? process_one_work+0x10b/0x1bc
[<e1c663f0>] ? tg3_reset_task+0x0/0xe3 [tg3]
[<c044fd41>] ? worker_thread+0x77/0xf9
[<c0453048>] ? kthread+0x60/0x65
[<c044fcca>] ? worker_thread+0x0/0xf9
[<c0452fe8>] ? kthread+0x0/0x65
[<c040337e>] ? kernel_thread_helper+0x6/0x10
Code: f0 e8 88 ff ff ff 8d 65 f8 5b 5e 5d c3 55 89 e5 56 53 0f 1f 44 00 00 f6 8
EIP: [<e1c62f19>] tg3_tx_recover+0x1e/0x53 [tg3] SS:ESP 0068:c1801f30
---[ end trace 82381e9b93e397ad ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 20303, comm: kworker/0:2 Tainted: G D 2.6.36-2.el5.elrepo #1
Call Trace:
[<c043b3cd>] panic+0x62/0x15d
[<c06fb7d1>] oops_end+0x99/0xa8
[<e1c62f19>] ? tg3_tx_recover+0x1e/0x53 [tg3]
[<c0405a62>] die+0x58/0x5e

Thanks,
Steve

Additonal info I compiled the latest kernel 2.6.37-rc8+ and still have the problem.
Also boot with noapic I see this in the dmesg log and interrupts are increasing like crazy:
tg3.c:v3.115 (October 14, 2010)
tg3 0000:81:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
tg3 0000:81:00.0: setting latency timer to 64
tg3 0000:81:00.0: PCI: Disallowing DAC for device
tg3 0000:81:00.0: eth2: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC add
ress 00:02:b6:36:d1:39
tg3 0000:81:00.0: eth2: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed
[0])
tg3 0000:81:00.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:81:00.0: eth2: dma_rwctrl[76180000] dma_mask[32-bit]
tg3 0000:82:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
tg3 0000:82:00.0: setting latency timer to 64
tg3 0000:82:00.0: PCI: Disallowing DAC for device
tg3 0000:82:00.0: eth3: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC add
ress 00:02:b6:36:d1:3a
tg3 0000:82:00.0: eth3: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed
[0])
tg3 0000:82:00.0: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:82:00.0: eth3: dma_rwctrl[76180000] dma_mask[32-bit]
tg3 0000:81:00.0: irq 40 for MSI/MSI-X
tg3 0000:81:00.0: eth2: No interrupt was generated using MSI. Switching to INTx
mode. Please report this failure to the PCI maintainer and include system chipse
t information
ADDRCONF(NETDEV_UP): eth2: link is not ready
[root@Z1010 ~]# cat /proc/interrupts
CPU0
0: 162 XT-PIC-XT-PIC timer
1: 2 XT-PIC-XT-PIC i8042
2: 0 XT-PIC-XT-PIC cascade
3: 1 XT-PIC-XT-PIC
4: 4863 XT-PIC-XT-PIC serial
6: 2 XT-PIC-XT-PIC floppy
7: 5 XT-PIC-XT-PIC ehci_hcd:usb1, uhci_hcd:usb3
8: 0 XT-PIC-XT-PIC rtc0
9: 0 XT-PIC-XT-PIC acpi
10: 2334234 XT-PIC-XT-PIC uhci_hcd:usb2, eth0, eth2

[root@Z1010 ~]# cat /proc/interrupts |grep eth2
10: 18388914 XT-PIC-XT-PIC uhci_hcd:usb2, eth0, eth2
[root@Z1010 ~]# cat /proc/interrupts |grep eth2
10: 18901627 XT-PIC-XT-PIC uhci_hcd:usb2, eth0, eth2

--

"They that give up essential liberty to obtain temporary safety,
deserve neither liberty nor safety." (Ben Franklin)

"The course of history shows that as a government grows, liberty
decreases." (Thomas Jefferson)



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/