Re: [PATCH] x86: use PCI method for enabling AMD extended config space before MSR method
From: Robert Richter
Date: Fri Jan 07 2011 - 04:59:35 EST
On 07.01.11 02:40:00, Jan Beulich wrote:
> >>> On 06.01.11 at 18:20, Robert Richter <robert.richter@xxxxxxx> wrote:
> > On 06.01.11 11:57:35, Jan Beulich wrote:
> >> +#ifdef CONFIG_AMD_NB
> >> + /* Try the PCI method first. */
> >> + if (early_pci_allowed()) {
> >> + unsigned int i, n;
> >> +
> >> + for (n = i = 0; !n && amd_bus_dev_ranges[i].dev_limit; ++i) {
> >> + u8 bus = amd_bus_dev_ranges[i].bus;
> >> + u8 slot = amd_bus_dev_ranges[i].dev_base;
> >> + u8 limit = amd_bus_dev_ranges[i].dev_limit;
> >> +
> >> + for (; slot < limit; ++slot) {
> >> + u32 val = read_pci_config(bus, slot, 3, 0);
> >> +
> >> + if (!early_is_k8_nb(val))
> >> + continue;
> >> +
> >> + val = read_pci_config(bus, slot, 3, 0x8c);
> >> + if (!(val & (ENABLE_CF8_EXT_CFG >> 32))) {
> >> + val |= ENABLE_CF8_EXT_CFG >> 32;
> >> + write_pci_config(bus, slot, 3, 0x8c,
> >> + val);
> >> + }
> >> + ++n;
> >> + }
> >> + }
> >> + pr_info("Extended Config Space enabled on %u nodes\n", n);
> >
> > Isn't i the number of nodes?
>
> No, "i" is the number of PCI devices looked at (but only those that
> pass early_is_k8_nb() are of interest).
Right, your code is correct.
Thanks,
-Robert
--
Advanced Micro Devices, Inc.
Operating System Research Center
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/