RE: console problem?, close(2) hangs /sbin/init

[John Linn]

> -----Original Message-----
> From: Jesper Juhl [mailto:jj@xxxxxxxxxxxxx]
> Sent: Saturday, January 22, 2011 3:14 PM
> To: John Linn
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: console problem?, close(2) hangs /sbin/init
> 
> On Sat, 22 Jan 2011, John Linn wrote:
> 
> > I have a kernel that runs fine
> 
> What kernel exactely?

2.6.37, but I also tried a 2.6.35 build.

> 
> >with a busybox root file system using
> > inittab.  When I move to a non-busybox init (sysvinit), I see init
> > hanging when doing a close of standard error very early when it
starts.
> > I have debugged it with GDB but not found the source of the hang as
it's
> > in the kernel it appears.
> >
> > To debug this, I use init=/bin/sh on the kernel command line, then
exec
> > init to start it. The same root file system works on another board
with
> > a different kernel.
> 
> What other kernel version exactely?

2.6.28, but others have told them tested the same root file system on
2.6.37 kernels on other boards fine.

It's a poky based root file system for ARM.

I've tried comparing kernel configs to try look for differences without
much luck yet.

Thanks,
John

> 
> > I have also noticed that building init with
> > INITDEBUG on so that it forks for debugging makes it work fine. This
> > seems to indicate the device nodes are all fine to me.
> >
> > It seems related to PID 1 and the console device.
> >
> > Adding debug to the kernel in sys_close() shows it hanging in
> > filp_close() and I'm still digging more (maybe locking issue). The
> > console is a serial device with a newer driver which I suspected to
be
> > the issue, but can't see anything wrong.
> >
> > Any hints or similar problems seen would be much appreciated.
> > Thanks,
> > John
> >
> 
> --
> Jesper Juhl <jj@xxxxxxxxxxxxx>            http://www.chaosbits.net/
> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
> Plain text mails only, please.
> 


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/