[PATCH OF 07/14] of: move of_irq_map_pci() into generic code

[Sebastian Andrzej Siewior]

From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>

There is a tiny difference between PPC32 and PPC64. Microblaze uses the
PPC32 variant.

Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
---
 arch/microblaze/include/asm/pci-bridge.h |   12 ++++
 arch/microblaze/include/asm/prom.h       |   15 -----
 arch/microblaze/kernel/prom_parse.c      |   77 ---------------------------
 arch/microblaze/pci/pci-common.c         |    1 +
 arch/powerpc/include/asm/pci-bridge.h    |   10 ++++
 arch/powerpc/include/asm/prom.h          |   15 -----
 arch/powerpc/kernel/pci-common.c         |    1 +
 arch/powerpc/kernel/prom_parse.c         |   84 ------------------------------
 drivers/of/Kconfig                       |    6 ++
 drivers/of/Makefile                      |    1 +
 drivers/of/of_pci.c                      |   80 ++++++++++++++++++++++++++++
 include/linux/of_pci.h                   |   20 +++++++
 12 files changed, 131 insertions(+), 191 deletions(-)
 create mode 100644 drivers/of/of_pci.c
 create mode 100644 include/linux/of_pci.h

diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 0c68764..c2a40a4 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -104,11 +104,22 @@ struct pci_controller {
 	int global_number;	/* PCI domain number */
 };
 
+#ifdef CONFIG_PCI
 static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
 {
 	return bus->sysdata;
 }
 
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	struct pci_controller *host;
+
+	if (bus->self)
+		return pci_device_to_OF_node(bus->self);
+	host = pci_bus_to_host(bus);
+	return host ? host->dn : NULL;
+}
+
 static inline int isa_vaddr_is_ioport(void __iomem *address)
 {
 	/* No specific ISA handling on ppc32 at this stage, it
@@ -116,6 +127,7 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
 	 */
 	return 0;
 }
+#endif
 
 /* These are used for config access before all the PCI probing
    has been done. */
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 2e72af0..d0890d3 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -64,21 +64,6 @@ extern void kdump_move_device_tree(void);
 /* CPU OF node matching */
 struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
 
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev:	the device whose interrupt is to be resolved
- * @out_irq:	structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-struct of_irq;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index 9ae24f4..47187cc 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -2,88 +2,11 @@
 
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/pci_regs.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/etherdevice.h>
 #include <linux/of_address.h>
 #include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#ifdef CONFIG_PCI
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
-	struct device_node *dn, *ppnode;
-	struct pci_dev *ppdev;
-	u32 lspec;
-	u32 laddr[3];
-	u8 pin;
-	int rc;
-
-	/* Check if we have a device node, if yes, fallback to standard OF
-	 * parsing
-	 */
-	dn = pci_device_to_OF_node(pdev);
-	if (dn)
-		return of_irq_map_one(dn, 0, out_irq);
-
-	/* Ok, we don't, time to have fun. Let's start by building up an
-	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
-	 * for PCI. If you do different, then don't use that routine.
-	 */
-	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
-	if (rc != 0)
-		return rc;
-	/* No pin, exit */
-	if (pin == 0)
-		return -ENODEV;
-
-	/* Now we walk up the PCI tree */
-	lspec = pin;
-	for (;;) {
-		/* Get the pci_dev of our parent */
-		ppdev = pdev->bus->self;
-
-		/* Ouch, it's a host bridge... */
-		if (ppdev == NULL) {
-			struct pci_controller *host;
-			host = pci_bus_to_host(pdev->bus);
-			ppnode = host ? host->dn : NULL;
-			/* No node for host bridge ? give up */
-			if (ppnode == NULL)
-				return -EINVAL;
-		} else
-			/* We found a P2P bridge, check if it has a node */
-			ppnode = pci_device_to_OF_node(ppdev);
-
-		/* Ok, we have found a parent with a device-node, hand over to
-		 * the OF parsing code.
-		 * We build a unit address from the linux device to be used for
-		 * resolution. Note that we use the linux bus number which may
-		 * not match your firmware bus numbering.
-		 * Fortunately, in most cases, interrupt-map-mask doesn't
-		 * include the bus number as part of the matching.
-		 * You should still be careful about that though if you intend
-		 * to rely on this function (you ship  a firmware that doesn't
-		 * create device nodes for all PCI devices).
-		 */
-		if (ppnode)
-			break;
-
-		/* We can only get here if we hit a P2P bridge with no node,
-		 * let's do standard swizzling and try again
-		 */
-		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
-		pdev = ppdev;
-	}
-
-	laddr[0] = (pdev->bus->number << 16)
-		| (pdev->devfn << 8);
-	laddr[1]  = laddr[2] = 0;
-	return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
 
 void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 		unsigned long *busno, unsigned long *phys, unsigned long *size)
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index e363615..1e01a12 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_pci.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 51e9e6f..edeb80f 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -171,6 +171,16 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
 	return bus->sysdata;
 }
 
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	struct pci_controller *host;
+
+	if (bus->self)
+		return pci_device_to_OF_node(bus->self);
+	host = pci_bus_to_host(bus);
+	return host ? host->dn : NULL;
+}
+
 static inline int isa_vaddr_is_ioport(void __iomem *address)
 {
 	/* No specific ISA handling on ppc32 at this stage, it
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index d727575..c189aa5 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -70,21 +70,6 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; }
 #endif
 #define of_node_to_nid of_node_to_nid
 
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev:	the device whose interrupt is to be resolved
- * @out_irq:	structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-struct of_irq;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
 extern void of_instantiate_rtc(void);
 
 /* These includes are put at the bottom because they may contain things
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 10a44e6..eb341be 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/of_address.h>
+#include <linux/of_pci.h>
 #include <linux/mm.h>
 #include <linux/list.h>
 #include <linux/syscalls.h>
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index c2b7a07..47187cc 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -2,95 +2,11 @@
 
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/pci_regs.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/etherdevice.h>
 #include <linux/of_address.h>
 #include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#ifdef CONFIG_PCI
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
-	struct device_node *dn, *ppnode;
-	struct pci_dev *ppdev;
-	u32 lspec;
-	u32 laddr[3];
-	u8 pin;
-	int rc;
-
-	/* Check if we have a device node, if yes, fallback to standard OF
-	 * parsing
-	 */
-	dn = pci_device_to_OF_node(pdev);
-	if (dn) {
-		rc = of_irq_map_one(dn, 0, out_irq);
-		if (!rc)
-			return rc;
-	}
-
-	/* Ok, we don't, time to have fun. Let's start by building up an
-	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
-	 * for PCI. If you do different, then don't use that routine.
-	 */
-	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
-	if (rc != 0)
-		return rc;
-	/* No pin, exit */
-	if (pin == 0)
-		return -ENODEV;
-
-	/* Now we walk up the PCI tree */
-	lspec = pin;
-	for (;;) {
-		/* Get the pci_dev of our parent */
-		ppdev = pdev->bus->self;
-
-		/* Ouch, it's a host bridge... */
-		if (ppdev == NULL) {
-#ifdef CONFIG_PPC64
-			ppnode = pci_bus_to_OF_node(pdev->bus);
-#else
-			struct pci_controller *host;
-			host = pci_bus_to_host(pdev->bus);
-			ppnode = host ? host->dn : NULL;
-#endif
-			/* No node for host bridge ? give up */
-			if (ppnode == NULL)
-				return -EINVAL;
-		} else
-			/* We found a P2P bridge, check if it has a node */
-			ppnode = pci_device_to_OF_node(ppdev);
-
-		/* Ok, we have found a parent with a device-node, hand over to
-		 * the OF parsing code.
-		 * We build a unit address from the linux device to be used for
-		 * resolution. Note that we use the linux bus number which may
-		 * not match your firmware bus numbering.
-		 * Fortunately, in most cases, interrupt-map-mask doesn't include
-		 * the bus number as part of the matching.
-		 * You should still be careful about that though if you intend
-		 * to rely on this function (you ship  a firmware that doesn't
-		 * create device nodes for all PCI devices).
-		 */
-		if (ppnode)
-			break;
-
-		/* We can only get here if we hit a P2P bridge with no node,
-		 * let's do standard swizzling and try again
-		 */
-		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
-		pdev = ppdev;
-	}
-
-	laddr[0] = (pdev->bus->number << 16)
-		| (pdev->devfn << 8);
-	laddr[1]  = laddr[2] = 0;
-	return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
 
 void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 		unsigned long *busno, unsigned long *phys, unsigned long *size)
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 3c6e100..c71cff1 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -69,4 +69,10 @@ config OF_MDIO
 	help
 	  OpenFirmware MDIO bus (Ethernet PHY) accessors
 
+config OF_PCI
+	def_tristate PCI
+	depends on PCI && !SPARC
+	help
+	  OpenFirmware PCI bus accessors
+
 endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 3ab21a0..f7861ed 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_OF_I2C)	+= of_i2c.o
 obj-$(CONFIG_OF_NET)	+= of_net.o
 obj-$(CONFIG_OF_SPI)	+= of_spi.o
 obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
+obj-$(CONFIG_OF_PCI)	+= of_pci.o
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
new file mode 100644
index 0000000..dd862d2
--- /dev/null
+++ b/drivers/of/of_pci.c
@@ -0,0 +1,80 @@
+#include <linux/kernel.h>
+#include <linux/of_pci.h>
+#include <asm/prom.h>
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+	struct device_node *dn, *ppnode;
+	struct pci_dev *ppdev;
+	u32 lspec;
+	__be32 lspec_be;
+	__be32 laddr[3];
+	u8 pin;
+	int rc;
+
+	/* Check if we have a device node, if yes, fallback to standard OF
+	 * parsing
+	 */
+	dn = pci_device_to_OF_node(pdev);
+	if (dn) {
+		rc = of_irq_map_one(dn, 0, out_irq);
+		if (!rc)
+			return rc;
+	}
+
+	/* Ok, we don't, time to have fun. Let's start by building up an
+	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
+	 * for PCI. If you do different, then don't use that routine.
+	 */
+	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+	if (rc != 0)
+		return rc;
+	/* No pin, exit */
+	if (pin == 0)
+		return -ENODEV;
+
+	/* Now we walk up the PCI tree */
+	lspec = pin;
+	for (;;) {
+		/* Get the pci_dev of our parent */
+		ppdev = pdev->bus->self;
+
+		/* Ouch, it's a host bridge... */
+		if (ppdev == NULL) {
+			ppnode = pci_bus_to_OF_node(pdev->bus);
+
+			/* No node for host bridge ? give up */
+			if (ppnode == NULL)
+				return -EINVAL;
+		} else {
+			/* We found a P2P bridge, check if it has a node */
+			ppnode = pci_device_to_OF_node(ppdev);
+		}
+
+		/* Ok, we have found a parent with a device-node, hand over to
+		 * the OF parsing code.
+		 * We build a unit address from the linux device to be used for
+		 * resolution. Note that we use the linux bus number which may
+		 * not match your firmware bus numbering.
+		 * Fortunately, in most cases, interrupt-map-mask doesn't
+		 * include the bus number as part of the matching.
+		 * You should still be careful about that though if you intend
+		 * to rely on this function (you ship  a firmware that doesn't
+		 * create device nodes for all PCI devices).
+		 */
+		if (ppnode)
+			break;
+
+		/* We can only get here if we hit a P2P bridge with no node,
+		 * let's do standard swizzling and try again
+		 */
+		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
+		pdev = ppdev;
+	}
+
+	lspec_be = cpu_to_be32(lspec);
+	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
+	laddr[1]  = laddr[2] = cpu_to_be32(0);
+	return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
new file mode 100644
index 0000000..9b0ba67
--- /dev/null
+++ b/include/linux/of_pci.h
@@ -0,0 +1,20 @@
+#ifndef __OF_PCI_H
+#define __OF_PCI_H
+
+#include <linux/pci.h>
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:       the device whose interrupt is to be resolved
+ * @out_irq:    structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+struct of_irq;
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+#endif
-- 
1.7.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/