[patch] kconfig: unify GENERIC_ISA_DMA and ISA_DMA_API

From: David Rientjes
Date: Tue Jan 25 2011 - 20:06:51 EST


CONFIG_GENERIC_ISA_DMA and CONFIG_ISA_DMA_API usually have dependencies
on one another depending on the architecture and generic kernel code uses
either to determine whether an ISA-style DMA API is configured.

It doesn't make sense to enable one option without enabling the other and
leads to inconsistencies in generic code, for example, where drivers
depending on CONFIG_ISA_DMA_API actually require CONFIG_GENERIC_ISA_DMA
as well for dma_lock or request_dma(). This could be resolved by
requiring both options whenever one is enabled, but then only one option
is actually required.

This patch unifies both options and consolidates them into a single
option: CONFIG_GENERIC_ISA_DMA. It is also a prerequisite for a 1% text
savings for a future x86 patch that allows these options to be disabled
on that architecture when CONFIG_ZONE_DMA also becomes configurable.

Signed-off-by: David Rientjes <rientjes@xxxxxxxxxx>
---
Documentation/DMA-ISA-LPC.txt | 10 +++++-----
arch/alpha/Kconfig | 4 ----
arch/arm/Kconfig | 10 +++-------
arch/arm/include/asm/dma.h | 4 ++--
arch/arm/kernel/Makefile | 2 +-
arch/m68knommu/Kconfig | 2 +-
arch/mips/Kconfig | 4 ----
arch/parisc/Kconfig | 2 +-
arch/powerpc/Kconfig | 7 +------
arch/x86/Kconfig | 4 ----
drivers/block/Kconfig | 2 +-
drivers/char/Kconfig | 2 +-
drivers/mmc/host/Kconfig | 2 +-
drivers/net/Kconfig | 10 +++++-----
drivers/net/appletalk/Kconfig | 2 +-
drivers/net/cs89x0.c | 2 +-
drivers/net/hamradio/Kconfig | 4 ++--
drivers/net/irda/Kconfig | 10 +++++-----
drivers/net/tokenring/Kconfig | 2 +-
drivers/net/wan/Kconfig | 6 +++---
drivers/net/wireless/Kconfig | 2 +-
drivers/parport/parport_pc.c | 2 +-
drivers/scsi/Kconfig | 12 ++++++------
include/sound/core.h | 2 +-
net/irda/irda_device.c | 2 +-
sound/core/Makefile | 8 ++++----
sound/isa/Kconfig | 2 +-
sound/oss/Kconfig | 2 +-
sound/pci/Kconfig | 4 ++--
29 files changed, 53 insertions(+), 74 deletions(-)

diff --git a/Documentation/DMA-ISA-LPC.txt b/Documentation/DMA-ISA-LPC.txt
--- a/Documentation/DMA-ISA-LPC.txt
+++ b/Documentation/DMA-ISA-LPC.txt
@@ -20,8 +20,8 @@ physical addresses (see Documentation/DMA-API.txt for details).

The second contains the routines specific to ISA DMA transfers. Since
this is not present on all platforms make sure you construct your
-Kconfig to be dependent on ISA_DMA_API (not ISA) so that nobody tries
-to build your driver on unsupported platforms.
+Kconfig to be dependent on GENERIC_ISA_DMA (not only ISA) so that
+nobody tries to build your driver on unsupported platforms.

Part II - Buffer allocation
---------------------------
@@ -53,9 +53,9 @@ Part III - Address translation
To translate the virtual address to a physical use the normal DMA
API. Do _not_ use isa_virt_to_phys() even though it does the same
thing. The reason for this is that the function isa_virt_to_phys()
-will require a Kconfig dependency to ISA, not just ISA_DMA_API which
-is really all you need. Remember that even though the DMA controller
-has its origins in ISA it is used elsewhere.
+will require a Kconfig dependency to ISA, not just GENERIC_ISA_DMA
+which is really all you need. Remember that even though the DMA
+controller has its origins in ISA it is used elsewhere.

Note: x86_64 had a broken DMA API when it came to ISA but has since
been fixed. If your arch has problems then fix the DMA API instead of
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -309,10 +309,6 @@ config ISA
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.

-config ISA_DMA_API
- bool
- default y
-
config PCI
bool
depends on !ALPHA_JENSEN
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -388,7 +388,7 @@ config ARCH_NETX
config ARCH_H720X
bool "Hynix HMS720x-based"
select CPU_ARM720T
- select ISA_DMA_API
+ select GENERIC_ISA_DMA
select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Hynix HMS720x
@@ -644,7 +644,7 @@ config ARCH_RPC
select TIMER_ACORN
select ARCH_MAY_HAVE_PC_FDC
select HAVE_PATA_PLATFORM
- select ISA_DMA_API
+ select GENERIC_ISA_DMA
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
@@ -1198,11 +1198,7 @@ config ISA
# Select ISA DMA controller support
config ISA_DMA
bool
- select ISA_DMA_API
-
-# Select ISA DMA interface
-config ISA_DMA_API
- bool
+ select GENERIC_ISA_DMA

config PCI
bool "PCI support" if MIGHT_HAVE_PCI
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -10,7 +10,7 @@
#define MAX_DMA_ADDRESS 0xffffffff
#endif

-#ifdef CONFIG_ISA_DMA_API
+#ifdef CONFIG_GENERIC_ISA_DMA
/*
* This is used to support drivers written for the x86 ISA DMA API.
* It should not be re-used except for that purpose.
@@ -138,7 +138,7 @@ extern int get_dma_residue(unsigned int chan);
#define NO_DMA 255
#endif

-#endif /* CONFIG_ISA_DMA_API */
+#endif /* CONFIG_GENERIC_ISA_DMA */

#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_OC_ETM) += etm.o

-obj-$(CONFIG_ISA_DMA_API) += dma.o
+obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
obj-$(CONFIG_ARCH_ACORN) += ecard.o
obj-$(CONFIG_FIQ) += fiq.o
obj-$(CONFIG_MODULES) += armksyms.o module.o
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -771,7 +771,7 @@ source "mm/Kconfig"

endmenu

-config ISA_DMA_API
+config GENERIC_ISA_DMA
bool
depends on !M5272
default y
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -907,15 +907,11 @@ config NO_IOPORT
config GENERIC_ISA_DMA
bool
select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
- select ISA_DMA_API

config GENERIC_ISA_DMA_SUPPORT_BROKEN
bool
select GENERIC_ISA_DMA

-config ISA_DMA_API
- bool
-
config GENERIC_GPIO
bool

diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -85,7 +85,7 @@ config NEED_DMA_MAP_STATE
config NEED_SG_DMA_LENGTH
def_bool y

-config ISA_DMA_API
+config GENERIC_ISA_DMA
bool

config ARCH_MAY_HAVE_PC_FDC
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -601,10 +601,6 @@ config SECCOMP

endmenu

-config ISA_DMA_API
- bool
- default !PPC_ISERIES || PCI
-
menu "Bus options"

config ISA
@@ -630,8 +626,7 @@ config NEED_SG_DMA_LENGTH

config GENERIC_ISA_DMA
bool
- depends on ISA_DMA_API
- default y
+ default !PPC_ISERIES || PCI

config PPC_INDIRECT_PCI
bool
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2000,10 +2000,6 @@ source "drivers/pci/pcie/Kconfig"

source "drivers/pci/Kconfig"

-# x86_64 have no ISA slots, but do have ISA-style DMA.
-config ISA_DMA_API
- def_bool y
-
if X86_32

config ISA
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -65,7 +65,7 @@ config AMIGA_Z2RAM

config BLK_DEV_XD
tristate "XT hard disk support"
- depends on ISA && ISA_DMA_API
+ depends on ISA && GENERIC_ISA_DMA
select CHECK_SIGNATURE
help
Very old 8 bit hard disk controllers used in the IBM XT computer
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -236,7 +236,7 @@ config ISI

config SYNCLINK
tristate "Microgate SyncLink card support"
- depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+ depends on SERIAL_NONSTANDARD && PCI && GENERIC_ISA_DMA
help
Provides support for the SyncLink ISA and PCI multiprotocol serial
adapters. These adapters support asynchronous and HDLC bit
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -235,7 +235,7 @@ config MMC_OMAP_HS

config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on ISA_DMA_API
+ depends on GENERIC_ISA_DMA
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -655,7 +655,7 @@ config EL2

config ELPLUS
tristate "3c505 \"EtherLink Plus\" support"
- depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
+ depends on NET_VENDOR_3COM && ISA && GENERIC_ISA_DMA
---help---
Information about this network (Ethernet) card can be found in
<file:Documentation/networking/3c505.txt>. If you have a card of
@@ -693,7 +693,7 @@ config EL3

config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
- depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
+ depends on NET_VENDOR_3COM && (ISA || EISA) && GENERIC_ISA_DMA
help
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y and read the Ethernet-HOWTO, available from
@@ -766,7 +766,7 @@ config TYPHOON

config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
- depends on ISA && ISA_DMA_API
+ depends on ISA && GENERIC_ISA_DMA
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1113,7 +1113,7 @@ config NI52

config NI65
tristate "NI6510 support"
- depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
+ depends on NET_VENDOR_RACAL && ISA && GENERIC_ISA_DMA
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1306,7 +1306,7 @@ config NE2000

config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
- depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
+ depends on NET_ISA && EXPERIMENTAL && GENERIC_ISA_DMA
help
The Zenith Z-Note notebook computer has a built-in network
(Ethernet) card, and this is the Linux driver for it. Note that the
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -41,7 +41,7 @@ config DEV_APPLETALK

config LTPC
tristate "Apple/Farallon LocalTalk PC support"
- depends on DEV_APPLETALK && (ISA || EISA) && ISA_DMA_API
+ depends on DEV_APPLETALK && (ISA || EISA) && GENERIC_ISA_DMA
help
This allows you to use the AppleTalk PC card to connect to LocalTalk
networks. The card is also known as the Farallon PhoneNet PC card.
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -107,7 +107,7 @@
* Note that even if DMA is turned off we still support the 'dma' and 'use_dma'
* module options so we don't break any startup scripts.
*/
-#ifndef CONFIG_ISA_DMA_API
+#ifndef CONFIG_GENERIC_ISA_DMA
#define ALLOW_DMA 0
#else
#define ALLOW_DMA 1
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -46,7 +46,7 @@ config BPQETHER

config DMASCC
tristate "High-speed (DMA) SCC driver for AX.25"
- depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API
+ depends on ISA && AX25 && BROKEN_ON_SMP && GENERIC_ISA_DMA
---help---
This is a driver for high-speed SCC boards, i.e. those supporting
DMA on one port. You usually use those boards to connect your
@@ -79,7 +79,7 @@ config DMASCC

config SCC
tristate "Z8530 SCC driver"
- depends on ISA && AX25 && ISA_DMA_API
+ depends on ISA && AX25 && GENERIC_ISA_DMA
---help---
These cards are used to connect your Linux box to an amateur radio
in order to communicate with other computers. If you want to use
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -281,7 +281,7 @@ config SIGMATEL_FIR

config NSC_FIR
tristate "NSC PC87108/PC87338"
- depends on IRDA && ISA_DMA_API
+ depends on IRDA && GENERIC_ISA_DMA
help
Say Y here if you want to build support for the NSC PC87108 and
PC87338 IrDA chipsets. This driver supports SIR,
@@ -292,7 +292,7 @@ config NSC_FIR

config WINBOND_FIR
tristate "Winbond W83977AF (IR)"
- depends on IRDA && ISA_DMA_API
+ depends on IRDA && GENERIC_ISA_DMA
help
Say Y here if you want to build IrDA support for the Winbond
W83977AF super-io chipset. This driver should be used for the IrDA
@@ -318,7 +318,7 @@ config AU1000_FIR

config SMC_IRCC_FIR
tristate "SMSC IrCC (EXPERIMENTAL)"
- depends on EXPERIMENTAL && IRDA && ISA_DMA_API
+ depends on EXPERIMENTAL && IRDA && GENERIC_ISA_DMA
help
Say Y here if you want to build support for the SMC Infrared
Communications Controller. It is used in a wide variety of
@@ -328,7 +328,7 @@ config SMC_IRCC_FIR

config ALI_FIR
tristate "ALi M5123 FIR (EXPERIMENTAL)"
- depends on EXPERIMENTAL && IRDA && ISA_DMA_API
+ depends on EXPERIMENTAL && IRDA && GENERIC_ISA_DMA
help
Say Y here if you want to build support for the ALi M5123 FIR
Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
@@ -356,7 +356,7 @@ config SA1100_FIR

config VIA_FIR
tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
- depends on IRDA && ISA_DMA_API
+ depends on IRDA && GENERIC_ISA_DMA
help
Say Y here if you want to build support for the VIA VT8231
and VIA VT1211 IrDA controllers, found on the motherboards using
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -84,7 +84,7 @@ config 3C359

config TMS380TR
tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
- depends on PCI || ISA && ISA_DMA_API || MCA
+ depends on PCI || ISA && GENERIC_ISA_DMA || MCA
select FW_LOADER
---help---
This driver provides generic support for token ring adapters
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -25,7 +25,7 @@ if WAN
# There is no way to detect a comtrol sv11 - force it modular for now.
config HOSTESS_SV11
tristate "Comtrol Hostess SV-11 support"
- depends on ISA && m && ISA_DMA_API && INET && HDLC
+ depends on ISA && m && GENERIC_ISA_DMA && INET && HDLC
help
Driver for Comtrol Hostess SV-11 network card which
operates on low speed synchronous serial links at up to
@@ -37,7 +37,7 @@ config HOSTESS_SV11
# The COSA/SRP driver has not been tested as non-modular yet.
config COSA
tristate "COSA/SRP sync serial boards support"
- depends on ISA && m && ISA_DMA_API && HDLC
+ depends on ISA && m && GENERIC_ISA_DMA && HDLC
---help---
Driver for COSA and SRP synchronous serial boards.

@@ -87,7 +87,7 @@ config LANMEDIA
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
tristate "Sealevel Systems 4021 support"
- depends on ISA && m && ISA_DMA_API && INET && HDLC
+ depends on ISA && m && GENERIC_ISA_DMA && INET && HDLC
help
This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -53,7 +53,7 @@ config LIBERTAS_THINFIRM_USB

config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on ISA_DMA_API && (PCI || BROKEN)
+ depends on GENERIC_ISA_DMA && (PCI || BROKEN)
select WIRELESS_EXT
select CRYPTO
select WEXT_SPY
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -68,7 +68,7 @@

#define PARPORT_PC_MAX_PORTS PARPORT_MAX

-#ifdef CONFIG_ISA_DMA_API
+#ifdef CONFIG_GENERIC_ISA_DMA
#define HAS_DMA
#endif

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -437,7 +437,7 @@ config SCSI_3W_SAS

config SCSI_7000FASST
tristate "7000FASST SCSI support"
- depends on ISA && SCSI && ISA_DMA_API
+ depends on ISA && SCSI && GENERIC_ISA_DMA
select CHECK_SIGNATURE
help
This driver supports the Western Digital 7000 SCSI host adapter
@@ -475,7 +475,7 @@ config SCSI_AHA152X

config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
- depends on ISA && SCSI && ISA_DMA_API
+ depends on ISA && SCSI && GENERIC_ISA_DMA
---help---
This is support for a SCSI host adapter. It is explained in section
3.4 of the SCSI-HOWTO, available from
@@ -635,7 +635,7 @@ config SCSI_HPTIOP

config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
+ depends on (PCI || ISA || MCA) && SCSI && GENERIC_ISA_DMA && VIRT_TO_BUS
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
@@ -722,7 +722,7 @@ config SCSI_DTC3280

config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
- depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
+ depends on (ISA || EISA || PCI) && SCSI && GENERIC_ISA_DMA
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
@@ -817,7 +817,7 @@ config SCSI_FD_MCS

config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
- depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
+ depends on (ISA || EISA || PCI) && SCSI && GENERIC_ISA_DMA
---help---
Formerly called GDT SCSI Disk Array Controller Support.

@@ -1526,7 +1526,7 @@ config SCSI_T128

config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
- depends on ISA && SCSI && ISA_DMA_API
+ depends on ISA && SCSI && GENERIC_ISA_DMA
---help---
This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
The source at <file:drivers/scsi/u14-34f.c> contains some
diff --git a/include/sound/core.h b/include/sound/core.h
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -311,7 +311,7 @@ int snd_device_free_all(struct snd_card *card, snd_device_cmd_t cmd);

/* isadma.c */

-#ifdef CONFIG_ISA_DMA_API
+#ifdef CONFIG_GENERIC_ISA_DMA
#define DMA_MODE_NO_ENABLE 0x0100

void snd_dma_program(unsigned long dma, unsigned long addr, unsigned int size, unsigned short mode);
diff --git a/net/irda/irda_device.c b/net/irda/irda_device.c
--- a/net/irda/irda_device.c
+++ b/net/irda/irda_device.c
@@ -298,7 +298,7 @@ struct net_device *alloc_irdadev(int sizeof_priv)
}
EXPORT_SYMBOL(alloc_irdadev);

-#ifdef CONFIG_ISA_DMA_API
+#ifdef CONFIG_GENERIC_ISA_DMA
/*
* Function setup_dma (idev, buffer, count, mode)
*
diff --git a/sound/core/Makefile b/sound/core/Makefile
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -4,10 +4,10 @@
#

snd-y := sound.o init.o memory.o info.o control.o misc.o device.o
-snd-$(CONFIG_ISA_DMA_API) += isadma.o
-snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o info_oss.o
-snd-$(CONFIG_SND_VMASTER) += vmaster.o
-snd-$(CONFIG_SND_JACK) += jack.o
+snd-$(CONFIG_GENERIC_ISA_DMA) += isadma.o
+snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o info_oss.o
+snd-$(CONFIG_SND_VMASTER) += vmaster.o
+snd-$(CONFIG_SND_JACK) += jack.o

snd-pcm-objs := pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o \
pcm_memory.o
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -19,7 +19,7 @@ config SND_SB16_DSP

menuconfig SND_ISA
bool "ISA sound devices"
- depends on ISA && ISA_DMA_API
+ depends on ISA && GENERIC_ISA_DMA
default y
help
Support for sound devices connected via the ISA bus.
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -253,7 +253,7 @@ config MSND_FIFOSIZE

menuconfig SOUND_OSS
tristate "OSS sound modules"
- depends on ISA_DMA_API && VIRT_TO_BUS
+ depends on GENERIC_ISA_DMA && VIRT_TO_BUS
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -33,7 +33,7 @@ config SND_ALS300

config SND_ALS4000
tristate "Avance Logic ALS4000"
- depends on ISA_DMA_API
+ depends on GENERIC_ISA_DMA
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -266,7 +266,7 @@ config SND_CS46XX_NEW_DSP

config SND_CS5530
tristate "CS5530 Audio"
- depends on ISA_DMA_API
+ depends on GENERIC_ISA_DMA
select SND_SB16_DSP
help
Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/