RE: A MMC card transfer issue

[Tomoya MORINAGA]

Hi Philip,

> which MMC driver are you using.
According to boot message, it seems sdhci.c is loaded.

Do I add only  "mmc->caps |=  MMC_CAP_BUS_WIDTH_TEST" in sdhc.c ?

Thanks,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.

> -----Original Message-----
> From: Philip Rakity [mailto:prakity@xxxxxxxxxxx] 
> Sent: Thursday, January 27, 2011 10:44 AM
> To: Tomoya MORINAGA
> Cc: Chris Ball; Kyungmin Park; linux-mmc@xxxxxxxxxxxxxxx; 
> linux-kernel@xxxxxxxxxxxxxxx; 
> andrew.chih.howe.khor@xxxxxxxxx; kok.howg.ewe@xxxxxxxxx; 
> Toshiharu Okada
> Subject: Re: A MMC card transfer issue
> 
> 
> There is no good answer.  
> 
> Doing this patch for 2.6.20 or so a long time ago had 
> problems because some controllers did not work.  The failures 
> were equally unpleasant.
> 
> The failure you see today is at least not a regression since 
> 1 bit did not work before.  
> 
> We hope that developers who know their h/w works add the CAP. 
> 
> 
> On Jan 26, 2011, at 5:31 PM, Tomoya MORINAGA wrote:
> 
> > Hi Philip,
> > 
> >> which MMC driver are you using.
> > Could you teach me how to get the information ?
> > 
> >> you need to have the driver or the low level code enable 
> this QUIRK.
> > BTW, Is the above permanent treatment?
> > I think modifying kernel source code isn't preferred.
> > 
> > Thanks,
> > -----------------------------------------
> > Tomoya MORINAGA
> > OKI SEMICONDUCTOR CO., LTD.
> > 
> >> -----Original Message-----
> >> From: Philip Rakity [mailto:prakity@xxxxxxxxxxx]
> >> Sent: Thursday, January 27, 2011 10:04 AM
> >> To: Tomoya MORINAGA
> >> Cc: Chris Ball; Kyungmin Park; linux-mmc@xxxxxxxxxxxxxxx; 
> >> linux-kernel@xxxxxxxxxxxxxxx; andrew.chih.howe.khor@xxxxxxxxx; 
> >> kok.howg.ewe@xxxxxxxxx
> >> Subject: Re: A MMC card transfer issue
> >> 
> >> 
> >> yes
> >> 
> >> you need to have the driver or the low level code enable 
> this QUIRK.
> >> 
> >> which mmc driver are you using.
> >> 
> >> On Jan 26, 2011, at 5:00 PM, Tomoya MORINAGA wrote:
> >> 
> >>> Hi Philip,
> >>> 
> >>> On Thursday, January 27, 2011 12:42 AM, Philip Rakity wrote:
> >>>> Did you define the CAP for BUS WIDTH ? 
> >>>> 
> >>>> MMC_CAP_BUS_WIDTH_TEST
> >>>> 
> >>>> in the driver or the platform driver ?
> >>> 
> >>> Let me make the above meaning clear.
> >>> 
> >>> I don't modify kernel source code "drivers/mmc" at all Is 
> the above 
> >>> mean I must modify something kernel source code ?
> >>> 
> >>> Thanks,
> >>> -----------------------------------------
> >>> Tomoya MORINAGA
> >>> OKI SEMICONDUCTOR CO., LTD.
> >>> 
> >> 
> > 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/