[PATCH] USB: EHCI: fix scheduling while atomic during suspend
From: Yin Kangkai
Date: Thu Jan 27 2011 - 04:19:59 EST
There is a msleep with spin lock held during ehci pci suspend, which will
cause kernel BUG: scheduling while atomic. Fix that.
[ 184.139620] BUG: scheduling while atomic: kworker/u:11/416/0x00000002
[ 184.139632] 4 locks held by kworker/u:11/416:
[ 184.139640] #0: (events_unbound){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb
[ 184.139669] #1: ((&entry->work)){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb
[ 184.139686] #2: (&__lockdep_no_validate__){+.+.+.}, at: [<c127cde3>] __device_suspend+0x2c/0x154
[ 184.139706] #3: (&(&ehci->lock)->rlock){-.-...}, at: [<c132f3d8>] ehci_pci_suspend+0x35/0x7b
[ 184.139725] Modules linked in: serio_raw pegasus joydev mrst_gfx(C) battery
[ 184.139748] irq event stamp: 52
[ 184.139753] hardirqs last enabled at (51): [<c14fdaac>] mutex_lock_nested+0x258/0x293
[ 184.139766] hardirqs last disabled at (52): [<c14fe7b4>] _raw_spin_lock_irqsave+0xf/0x3e
[ 184.139777] softirqs last enabled at (0): [<c10371c1>] copy_process+0x3d2/0x109d
[ 184.139789] softirqs last disabled at (0): [< (null)>] (null)
[ 184.139802] Pid: 416, comm: kworker/u:11 Tainted: G C 2.6.37-6.3-adaptation-oaktrail #37
[ 184.139809] Call Trace:
[ 184.139820] [<c102eeff>] __schedule_bug+0x5e/0x65
[ 184.139829] [<c14fbca5>] schedule+0xac/0xc4c
[ 184.139840] [<c11d4845>] ? string+0x37/0x8b
[ 184.139853] [<c1044f21>] ? lock_timer_base+0x1f/0x3e
[ 184.139863] [<c14fe7da>] ? _raw_spin_lock_irqsave+0x35/0x3e
[ 184.139876] [<c1061590>] ? trace_hardirqs_off+0xb/0xd
[ 184.139885] [<c14fccdc>] schedule_timeout+0x283/0x2d9
[ 184.139896] [<c104516f>] ? process_timeout+0x0/0xa
[ 184.139906] [<c14fcd47>] schedule_timeout_uninterruptible+0x15/0x17
[ 184.139916] [<c104566a>] msleep+0x10/0x16
[ 184.139926] [<c132f316>] ehci_adjust_port_wakeup_flags+0x69/0xf6
[ 184.139937] [<c132f3eb>] ehci_pci_suspend+0x48/0x7b
[ 184.139946] [<c1326587>] suspend_common+0x52/0xbb
[ 184.139956] [<c1326625>] hcd_pci_suspend+0x26/0x28
[ 184.139967] [<c11e7182>] pci_pm_suspend+0x5f/0xd0
[ 184.139976] [<c127ca3a>] pm_op+0x5d/0xf0
[ 184.139986] [<c127ceac>] __device_suspend+0xf5/0x154
[ 184.139996] [<c127d2c8>] async_suspend+0x16/0x3a
[ 184.140006] [<c1058f54>] async_run_entry_fn+0x89/0x111
[ 184.140016] [<c104deb6>] process_one_work+0x295/0x4cb
[ 184.140026] [<c1058ecb>] ? async_run_entry_fn+0x0/0x111
[ 184.140036] [<c104e3d0>] worker_thread+0x17f/0x298
[ 184.140045] [<c104e251>] ? worker_thread+0x0/0x298
[ 184.140055] [<c105277f>] kthread+0x64/0x69
[ 184.140064] [<c105271b>] ? kthread+0x0/0x69
[ 184.140075] [<c1002efa>] kernel_thread_helper+0x6/0x1a
Signed-off-by: Yin Kangkai <kangkai.yin@xxxxxxxxx>
---
drivers/usb/host/ehci-au1xxx.c | 2 +-
drivers/usb/host/ehci-hub.c | 11 ++++++++++-
drivers/usb/host/ehci-pci.c | 2 +-
3 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 2baf8a8..a869e3c 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
* mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped.
*/
- spin_lock_irqsave(&ehci->lock, flags);
ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
+ spin_lock_irqsave(&ehci->lock, flags);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 86f0815..a16c94a 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -111,14 +111,19 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
{
int port;
u32 temp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ehci->lock, flags);
/* If remote wakeup is enabled for the root hub but disabled
* for the controller, we must adjust all the port wakeup flags
* when the controller is suspended or resumed. In all other
* cases they don't need to be changed.
*/
- if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
+ if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup) {
+ spin_unlock_irqrestore(&ehci->lock, flags);
return;
+ }
/* clear phy low-power mode before changing wakeup flags */
if (ehci->has_hostpc) {
@@ -131,7 +136,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
temp = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
}
+ spin_unlock_irqrestore(&ehci->lock, flags);
msleep(5);
+ spin_lock_irqsave(&ehci->lock, flags);
}
port = HCS_N_PORTS(ehci->hcs_params);
@@ -170,6 +177,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
/* Does the root hub have a port wakeup pending? */
if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
}
static int ehci_bus_suspend (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index c84add2..b59d538 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -380,8 +380,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
* mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped.
*/
- spin_lock_irqsave (&ehci->lock, flags);
ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
+ spin_lock_irqsave (&ehci->lock, flags);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/