Re: [patch 1/3] mn10300: Remove stale code

[john stultz]

On Mon, 2011-01-31 at 13:19 +0000, Thomas Gleixner wrote:
> plain text document attachment (mn10300-remove-stale-code.patch)
> mn10300 implements clocksource and clockevents and selects them
> unconditionally in Kconfig. Remove the stale code which seems to be a
> leftover of the conversion. Cleanup the configuration switches as well.
> 
> Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Koichi Yasutake <yasutake.koichi@xxxxxxxxxxxxxxxx>
> Cc: Mark Salter <msalter@xxxxxxxxxx>

Acked-by: John Stultz <johnstul@xxxxxxxxxx>

> ---
>  arch/mn10300/Kconfig         |   15 ------------
>  arch/mn10300/kernel/Makefile |    5 +---
>  arch/mn10300/kernel/time.c   |   53 -------------------------------------------
>  3 files changed, 2 insertions(+), 71 deletions(-)
> 
> Index: linux-2.6/arch/mn10300/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/mn10300/Kconfig
> +++ linux-2.6/arch/mn10300/Kconfig
> @@ -53,21 +53,6 @@ config GENERIC_TIME
>  config GENERIC_CLOCKEVENTS
>  	def_bool y
> 
> -config GENERIC_CLOCKEVENTS_BUILD
> -	def_bool y
> -	depends on GENERIC_CLOCKEVENTS
> -
> -config GENERIC_CLOCKEVENTS_BROADCAST
> -	bool
> -
> -config CEVT_MN10300
> -       def_bool y
> -       depends on GENERIC_CLOCKEVENTS
> -
> -config CSRC_MN10300
> -       def_bool y
> -       depends on GENERIC_TIME
> -
>  config GENERIC_BUG
>  	def_bool y
> 
> Index: linux-2.6/arch/mn10300/kernel/Makefile
> ===================================================================
> --- linux-2.6.orig/arch/mn10300/kernel/Makefile
> +++ linux-2.6/arch/mn10300/kernel/Makefile
> @@ -8,7 +8,8 @@ fpu-obj-$(CONFIG_FPU) := fpu.o fpu-low.o
> 
>  obj-y   := process.o signal.o entry.o traps.o irq.o \
>  	   ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
> -	   switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y)
> +	   switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y) \
> +	   csrc-mn10300.o cevt-mn10300.o
> 
>  obj-$(CONFIG_SMP) += smp.o smp-low.o
> 
> @@ -28,5 +29,3 @@ obj-$(CONFIG_MN10300_RTC) += rtc.o
>  obj-$(CONFIG_PROFILE) += profile.o profile-low.o
>  obj-$(CONFIG_MODULES) += module.o
>  obj-$(CONFIG_KPROBES) += kprobes.o
> -obj-$(CONFIG_CSRC_MN10300) += csrc-mn10300.o
> -obj-$(CONFIG_CEVT_MN10300) += cevt-mn10300.o
> Index: linux-2.6/arch/mn10300/kernel/time.c
> ===================================================================
> --- linux-2.6.orig/arch/mn10300/kernel/time.c
> +++ linux-2.6/arch/mn10300/kernel/time.c
> @@ -93,47 +93,6 @@ irqreturn_t local_timer_interrupt(void)
>  	return IRQ_HANDLED;
>  }
> 
> -#ifndef CONFIG_GENERIC_TIME
> -/*
> - * advance the kernel's time keeping clocks (xtime and jiffies)
> - * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time
> - *   there's a need to update
> - */
> -static irqreturn_t timer_interrupt(int irq, void *dev_id)
> -{
> -	unsigned tsc, elapse;
> -	irqreturn_t ret;
> -
> -	write_seqlock(&xtime_lock);
> -
> -	while (tsc = get_cycles(),
> -	       elapse = tsc - mn10300_last_tsc, /* time elapsed since last
> -						 * tick */
> -	       elapse > MN10300_TSC_PER_HZ
> -	       ) {
> -		mn10300_last_tsc += MN10300_TSC_PER_HZ;
> -
> -		/* advance the kernel's time tracking system */
> -		do_timer(1);
> -	}
> -
> -	write_sequnlock(&xtime_lock);
> -
> -	ret = local_timer_interrupt();
> -#ifdef CONFIG_SMP
> -	send_IPI_allbutself(LOCAL_TIMER_IPI);
> -#endif
> -	return ret;
> -}
> -
> -static struct irqaction timer_irq = {
> -	.handler	= timer_interrupt,
> -	.flags		= IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER,
> -	.name		= "timer",
> -};
> -#endif /* CONFIG_GENERIC_TIME */
> -
> -#ifdef CONFIG_CSRC_MN10300
>  void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
>  {
>  	u64 temp;
> @@ -149,9 +108,7 @@ void __init clocksource_set_clock(struct
>  	cs->shift = shift;
>  	cs->mult = (u32) temp;
>  }
> -#endif
> 
> -#if CONFIG_CEVT_MN10300
>  void __cpuinit clockevent_set_clock(struct clock_event_device *cd,
>  				    unsigned int clock)
>  {
> @@ -168,7 +125,6 @@ void __cpuinit clockevent_set_clock(stru
>  	cd->shift = shift;
>  	cd->mult = (u32) temp;
>  }
> -#endif
> 
>  /*
>   * initialise the various timers used by the main part of the kernel
> @@ -181,11 +137,7 @@ void __init time_init(void)
>  	 */
>  	TMPSCNT |= TMPSCNT_ENABLE;
> 
> -#ifdef CONFIG_GENERIC_TIME
>  	init_clocksource();
> -#else
> -	startup_timestamp_counter();
> -#endif
> 
>  	printk(KERN_INFO
>  	       "timestamp counter I/O clock running at %lu.%02lu"
> @@ -194,12 +146,7 @@ void __init time_init(void)
> 
>  	mn10300_last_tsc = read_timestamp_counter();
> 
> -#ifdef CONFIG_GENERIC_CLOCKEVENTS
>  	init_clockevents();
> -#else
> -	reload_jiffies_counter(MN10300_JC_PER_HZ - 1);
> -	setup_jiffies_interrupt(TMJCIRQ, &timer_irq, CONFIG_TIMER_IRQ_LEVEL);
> -#endif
> 
>  #ifdef CONFIG_MN10300_WD_TIMER
>  	/* start the watchdog timer */
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/