Re: [PATCH] printk-formats.txt documentation update

[Joe Perches]

On Mon, 2011-02-07 at 18:12 +0000, Andrew Murray wrote:
> On 7 February 2011 09:29, Wolfram Sang <w.sang@xxxxxxxxxxxxxx> wrote:
> > On Sun, Feb 06, 2011 at 04:23:09PM +0000, Andrew Murray wrote:
> >> +
> >> +     For printing kernel pointers which should be hidden from unprivileged
> >> +     users. The behaviour of %pK depends on the kptr_resrict sysctl - see
> >
> > Typo: Should be kptr_restrict.
> Updated patch:

trivia:

> diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt
[]
> +Kernel Pointers:
> +
> +	%pK	0x0

Bad example, leading zeros are emitted.

	%pK	0x01234567 or 0x01234567890abcdef

depending on 32/64 bit. For 2.6.38, output should be 0x00000000
for a 0 if kptr_restrict is set, "(null)" or value otherwise.

> +	For printing kernel pointers which should be hidden from unprivileged
> +	users. The behaviour of %pK depends on the kptr_restrict sysctl - see
> +	Documentation/sysctl/kernel.txt for more details.
> +
> +Struct Resources:
> +
> +	%pr	[mem 0x60000000-0x6fffffff flags 0x2200]
> +	%pR	[mem 0x60000000-0x6fffffff pref]
> +
> +	For printing struct resources. The 'R' and 'r' specifiers result in a
> +	printed resource with ('R') or without ('r') a decoded flags member.

Same issue, mem resources are printed using sizeof(resource_size_t) * 2

> +IPv6 addresses:
> +
> +	%pI6	0001:0002:0003:0004:0005:0006:0007:0008
> +	%pi6	00010002000300040005000600070008
> +	%pI6c	1:2:3:4:5:6:7:8
> +
> +	For printing IPv6 network-order 16 bit hex addresses. The 'I6' and 'i6'
> +	specifiers result in a printed address with ('I6') or without ('i6')
> +	colon-separators. Leading zeros are always used.
> +
> +	The additional 'c' specifier can be used with the 'I' specifier to
> +	print a compressed IPv6 address as described by
> +	http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00.

It's probably better to use:

	http://tools.ietf.org/html/rfc5952

> +
> +UUID/GUID addresses:
> +
> +	%pU	00010203-0506-0708-090a-0b0c0d0e0fff

What happened to 04?

It's probably easier/simpler to just show all possible
output styles.  Assuming an in memory incrementing
16 byte array, output is:

	%pU	00010203-0405-0607-08090a0b0c0d0e0f
	
> +	%pU[bBlL]

	%pUb	00010203-0405-0607-08090a0b0c0d0e0f
	%pUB	00010203-0405-0607-08090A0B0C0D0E0F
	%pUl	03020100-0504-0706-08090a0b0c0d0e0f
	%pUL	03020100-0504-0706-08090A0B0E0D0E0F

> +	For printing 16 byte UUID/GUIDs addresses. The additional 'l', 'L',
> +	'b' and 'B' specifiers are used to specify a little endian order in
> +	lower ('l') or upper case ('L') hex characters - and big endian order
> +	in lower ('b') or upper case ('B') hex characters.
> +
> +	Where no additional specifiers are used the default little endian
> +	order with lower case hex characters will be printed.
> +
> +struct va_format:
> +
> +	%pV	
> +
> +	For printing struct va_format structures. These contain a format string
> +	and va_list as follows:
> +
> +	struct va_format {
> +		const char *fmt;
> +		va_lost *va;

va_list


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/