[PATCH] HID: added new driver for Panasonic Elite Panaboard UB-T780 and UB-T880
From: Anton Chikin
Date: Tue Feb 08 2011 - 04:36:56 EST
From: Anton Chikin <anton.chikin@xxxxxxxxxxx>
Panasonic UB-T780 is a HID whiteboard with infrared detectors.
UB-T880 is a multitouch-enabled HID whiteboard.
Both of them use projector to present desktop, so they need calibration.
I've used my own IOCTL's to switch board modes and feed calibration data from userspace.
Sorry for previous ugly effort. I've missed some files in commit and forgot about copyrights.
Signed-off-by: Anton Chikin <kverlin@xxxxxxxxx>
---
drivers/hid/Kconfig | 6 +
drivers/hid/Makefile | 1 +
drivers/hid/hid-ids.h | 5 +
drivers/hid/hid-ubt880.c | 1205 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/hid/hid-ubt880.h | 162 +++++++
5 files changed, 1379 insertions(+), 0 deletions(-)
create mode 100644 drivers/hid/hid-ubt880.c
create mode 100644 drivers/hid/hid-ubt880.h
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 2560f01..8be6226 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -312,6 +312,12 @@ config HID_MULTITOUCH
To compile this driver as a module, choose M here: the
module will be called hid-multitouch.
+config HID_PANASONIC
+ tristate "Panasonic Elite Panaboards"
+ depends on USB_HID
+ ---help---
+ Support for Panasonic Elite Panaboard UB-T780 and UB-T880.
+
config HID_NTRIG
tristate "N-Trig touch screen"
depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 6efc2a0..85f3495 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o
obj-$(CONFIG_HID_WACOM) += hid-wacom.o
obj-$(CONFIG_HID_WALTOP) += hid-waltop.o
+obj-$(CONFIG_HID_PANASONIC) += hid-ubt880.o
obj-$(CONFIG_USB_HID) += usbhid/
obj-$(CONFIG_USB_MOUSE) += usbhid/
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 92a0d61..3ca7171 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -468,6 +468,11 @@
#define USB_VENDOR_ID_ORTEK 0x05a4
#define USB_DEVICE_ID_ORTEK_WKB2000 0x2000
+#define USB_VENDOR_ID_PANASONIC 0x04da
+#define USB_DEVICE_ID_PANABOARD_780 0x1044
+#define USB_DEVICE_ID_PANABOARD_880 0x104d
+#define USB_DEVICE_ID_PANABOARD_880_PEN 0x104e
+
#define USB_VENDOR_ID_PANJIT 0x134c
#define USB_VENDOR_ID_PANTHERLORD 0x0810
diff --git a/drivers/hid/hid-ubt880.c b/drivers/hid/hid-ubt880.c
new file mode 100644
index 0000000..098864d
--- /dev/null
+++ b/drivers/hid/hid-ubt880.c
@@ -0,0 +1,1205 @@
+/*
+ * USB HID driver for Panasonic elite Panaboard UTB780
+ * Copyright (c) 2008 Igor Shakirov, Victor Grenke <comp.vision@xxxxxxxxx>
+ * Copyright (c) 2010-2011 Anton Chikin<anton.chikin@xxxxxxxxxxx> for Panasonic.
+ *
+ * Information.
+ * It's driver for supporting Panasonic Elite Panaboard HID USB device.
+ * This code was inspired by hid-cando.c and hid-roccat.c(chrdev part)
+ *
+ *
+ * This file is part of USB HID driver for Panasonic elite Panaboard UTB780.
+ *
+ * This driver is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include "hid-ids.h"
+#include "hid-ubt880.h"
+
+#define UBT780_DEBUG
+
+#ifdef UBT780_DEBUG
+#define UBT_DUMMY_DEBUG if (ubt_debug) printk(KERN_DEBUG "ubt880: %s:%s line %i\n", __FILE__, __func__ , __LINE__);
+#else
+#define UBT_DUMMY_DEBUG
+#endif
+
+static int ubt_major;
+static struct cdev ubt_cdev;
+static struct class *ubt_class;
+static struct ubt_chrdev *ubt_table[UBT780_MAX_DEVICES];
+static DEFINE_MUTEX(minors_lock);
+static int ubt_debug = 0;
+module_param_named(debug_enabled, ubt_debug, int, 0600);
+MODULE_PARM_DESC(debug_enabled, "Toggle huge and ugly UBT debugging messages.");
+
+static int isCalibrated = 0;
+
+static int mode = 0;
+
+static int LTx = -1;
+static int LTy = -1;
+static int LBx = -1;
+static int LBy = -1;
+static int RTx = -1;
+static int RTy = -1;
+static int RBx = -1;
+static int RBy = -1;
+
+static int LTX = -1;
+static int LTY = -1;
+static int LBX = -1;
+static int LBY = -1;
+static int RTX = -1;
+static int RTY = -1;
+static int RBX = -1;
+static int RBY = -1;
+
+static int Xoff_A = -1;
+static int Xmag_A = -1;
+static int Xmag_B = -1;
+static int Yoff_A = -1;
+static int Ymag_A = -1;
+static int Ymag_B = -1;
+
+module_param(mode, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(mode, "1 - digitizer mode, 0 - mouse mode");
+
+module_param(isCalibrated, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(isCalibrated, "Calibration data is set to driver.");
+/*---------------------------------------------------------------------*/
+
+module_param(LTx, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(LTx, "point x of left-up corner, screen coordinate");
+
+module_param(LTy, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(LTy, "point y of left-up corner, screen coordinate");
+
+module_param(LBx, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(LBx, "point x of left-bot corner, screen coordinate");
+
+module_param(LBy, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(LBy, "point y of left-bot corner, screen coordinate");
+
+module_param(RTx, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(RTx, "point x of rigth-up corner, screen coordinate");
+
+module_param(RTy, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(RTy, "point y of rigth-up corner, screen coordinate");
+
+module_param(RBx, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(RBx, "point x of rigth-bot corner, screen coordinate");
+
+module_param(RBy, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(RBy, "point y of rigth-bot corner, screen coordinate");
+
+/*---------------------------------------------------------------------*/
+
+module_param(LTX, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(LTX, "point x of left-up corner, board coordinate");
+
+module_param(LTY, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(LTY, "point y of left-up corner, board coordinate");
+
+module_param(LBX, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(LBX, "point x of left-bot corner, board coordinate");
+
+module_param(LBY, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(LBY, "point y of left-bot corner, board coordinate");
+
+module_param(RTX, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(RTX, "point x of rigth-up corner, board coordinate");
+
+module_param(RTY, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(RTY, "point y of rigth-up corner, board coordinate");
+
+module_param(RBX, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(RBX, "point x of rigth-bot corner, board coordinate");
+
+module_param(RBY, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(RBY, "point y of rigth-bot corner, board coordinate");
+/*-----------------------------------------------------------------*/
+module_param(Xoff_A, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(Xoff_A, "point x of rigth-up corner, board coordinate");
+
+module_param(Xmag_A, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(Xmag_A, "point y of rigth-up corner, board coordinate");
+
+module_param(Xmag_B, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(Xmag_B, "point x of rigth-bot corner, board coordinate");
+
+module_param(Ymag_A, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(Ymag_A, "point y of rigth-bot corner, board coordinate");
+
+module_param(Ymag_B, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(Ymag_B, "point y of rigth-bot corner, board coordinate");
+
+module_param(Yoff_A, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+MODULE_PARM_DESC(Yoff_A, "point x of rigth-up corner, board coordinate");
+
+/*Character device forward declarations*/
+static int ubt880_open_io(struct inode *node, struct file *file);
+static int ubt880_release_io(struct inode *node, struct file *file);
+static long ubt880_ioctl(struct file *iofile, unsigned int command, unsigned long data);
+static int ubt_chrdev_connect(struct hid_device *, struct ubt880_data *);
+static void ubt_chrdev_disconnect(struct hid_device *hid);
+#ifdef UBT780_DEBUG
+static void send_test_packet(struct hid_device *hdev);
+static void fake_calibration(struct hid_device *hdev, unsigned short *coords);
+#endif
+static struct input_dev *ubt880_get_input(struct hid_device *hdev);
+static int ubt880_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size);
+/*We are using function from usbhid module*/
+extern void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir);
+static void set_calib_to_device(struct ubt880_data *drvdata);
+
+/*switch_mode : Our device has two modes: mouse mode in which it is acting like mouse, producing
+ * absolute coordinates [0 - 4095]
+ * The second mode is digitizer mode, which produce two raw clock measurments from ultrasound
+ * recievers in the top-left corner of the board. This mode more flexible and also reports batterey
+ * status of digitizer pen and penID.
+ */
+static int ubt880_switch_mode(struct hid_device *hid, unsigned char mode)
+{
+ int rc = 0;
+
+ struct hid_report *report = NULL;
+ struct hid_report *report_cur = NULL;
+ __s32 *val = NULL;
+ /** Packet forming */
+
+ UBT_DUMMY_DEBUG
+
+ list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT].report_list, list)
+ {
+ if (hid->report_enum[HID_FEATURE_REPORT].numbered) {
+ report_cur = report;
+ }
+ }
+
+ if (report_cur == NULL) {
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880 : switch mode : report_cur = 0");
+ return rc;
+ }
+
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880: switch mode: reportid = %d", report_cur->id);
+ val = report_cur->field[0]->value;
+
+ switch (mode) {
+ case MODE_MOUSE: {
+ mode = 0x0;
+ break;
+ }
+ case MODE_SINGLETOUCH: {
+ mode = 0x01;
+ break;
+ }
+ case MODE_DGTZR: {
+ mode = 0x02;
+ break;
+ }
+ default: {
+ rc = -EIO;
+ return rc;
+ }
+ }
+ val[0] = mode;
+ UBT_DUMMY_DEBUG
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880 :switch_mode: usbhid_submit_report drv=%p p=%p mode=%d", hid, report_cur, mode);
+ /*Send report to device*/
+
+ usbhid_submit_report(hid, report_cur, USB_DIR_OUT);
+ UBT_DUMMY_DEBUG
+ return rc;
+}
+
+static int ubt780_switch_mode(struct hid_device *hid, unsigned char mode)
+{
+ int rc = 0;
+
+ struct hid_report *report = NULL;
+ struct hid_report *report_cur = NULL;
+ __s32 *val = NULL;
+ /** Packet forming */
+ UBT_DUMMY_DEBUG
+
+ list_for_each_entry(report,
+ &hid->report_enum[HID_OUTPUT_REPORT].report_list,
+ list)
+ {
+ if (hid->report_enum[HID_OUTPUT_REPORT].numbered)
+ report_cur = report;
+ }
+
+ switch (mode) {
+ case MODE_MOUSE: {
+ mode = 0x00;
+ break;
+ }
+ case MODE_DGTZR: {
+ mode = 0x01;
+ break;
+ }
+ default: {
+ rc = -EIO;
+ return rc;
+ }
+ }
+ val = report_cur->field[0]->value;
+ val[0] = 0x7e;
+ val[1] = 0x04;
+ val[2] = 0x4d;
+ val[3] = mode;
+ val[4] = 0x00;
+ val[5] = 0x0a;
+ val[6] = 0x00;
+ val[7] = 0x00;
+
+ UBT_DUMMY_DEBUG
+
+ if (report_cur == NULL) {
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt780 : switch mode : report_cur = 0");
+ return rc;
+ }
+
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt780 :switch_mode:\
+ usbhid_submit_report\
+ drv=%p p=%p mode=%d",
+ hid, report_cur, mode);
+ /*Send report to device*/
+
+ usbhid_submit_report(hid, report_cur, USB_DIR_OUT);
+ UBT_DUMMY_DEBUG
+ return rc;
+}
+
+/* PenToInt : converts ultrasound clock measurements to screen coordinates.*/
+/*Apply calibration to ultrasound clock measurements*/
+int xold = 0, yold = 0;
+bool ubt_pen_to_int(int *pLeft, int *pRight)
+{
+ int left2, right2 , n, w_n, sqr, xx, yy;
+ bool bRet = false;
+ static int w = 1164;
+
+ left2 = (*pLeft)*(*pLeft);
+ right2 = (*pRight)*(*pRight);
+ UBT_DUMMY_DEBUG
+ if (left2 == 0 && right2 == 0) {
+ *pLeft = (int)xold;
+ *pRight = (int)yold;
+ if (ubt_debug)
+ printk(KERN_DEBUG
+ "ubt780_XY old values: %d,%d", xold, yold);
+ return true;
+ }
+
+ n = (right2 - left2) / (2*w);
+ w_n = w-n;
+
+ sqr = (2*left2 - (w_n * w_n));
+
+ if (sqr < 0)
+ return bRet;
+
+ xx = (w_n + int_sqrt(sqr)) / 2;
+ yy = xx + n;
+
+ if (xx < 0 || yy < 0)
+ return bRet;
+
+ *pLeft = (int)xx;
+ *pRight = (int)yy;
+ bRet = true;
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt780_XY: %d,%d", xx, yy);
+
+ return bRet;
+}
+
+static bool ubt_calibrate(int inX, int inY, int *outX, int *outY, struct ubt_calib *calib)
+{
+ int Y_LTY, X_LTX, Xoff, Xmag, Yoff, Ymag;
+ unsigned int x, y;
+ xold = inX;
+ yold = inY;
+
+ Y_LTY = inY - calib->LTY;
+ X_LTX = inX - calib->LTX;
+
+ Xoff = Y_LTY * calib->Xoff_A + calib->LTX * 10000;
+ Xmag = (Y_LTY * calib->Xmag_A) / 10000;
+ Xmag += calib->Xmag_B;
+ Yoff = X_LTX * calib->Yoff_A + calib->LTY * 10000;
+ Ymag = X_LTX * calib->Ymag_A / 10000;
+ Ymag += calib->Ymag_B;
+
+ if (!Xmag)
+ Xmag = 1;
+ x = (inX * 10000 - Xoff) / Xmag;
+ x += calib->LTx;
+
+ if (!Ymag)
+ Ymag = 1;
+ y = (inY * 10000 - Yoff) / Ymag;
+ y += calib->LTy;
+
+ if (x < 0)
+ x = 0;
+ if (x > UBT880_MAX_AXIS_X)
+ x = UBT880_MAX_AXIS_X;
+ if (y < 0)
+ y = 0;
+ if (y > UBT880_MAX_AXIS_Y)
+ y = UBT880_MAX_AXIS_Y;
+
+ if (ubt_debug)
+ printk(KERN_DEBUG "%d - %d", x, y);
+ *outX = x;
+ *outY = y;
+ return true;
+}
+
+/*
+input_mapping : Set appropriate bits for input device according to current field, usage and usage page.
+For info about valid usage pages and usages see include/linux/hid.h
+For more info on input see Documentation/input/input.txt and Documentation/input/input-programming.txt
+and of course include/linux/input.h
+What to return?
+return < 0 - field was ignored
+return > 0 - field was mapped
+return == 0 - let hid driver map this field for you
+*/
+static int ubt880_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ /*Just ignore all fields*/
+ return -1;
+}
+/*
+ * input_mapped : called from hidinput_configure_usage after input is mapped.
+ * Never called if you have returned negative value from input_mapping.
+ * Return values:
+ * return < 0 - ignore field
+ * return >= 0 - do further processing
+ */
+/*static int ubt880_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ return -1;
+}*/
+
+
+/* event : Called on every single report field.
+ * Return :
+ * return == 0 - do generic input hidinput and hiddev processing. See hid_process_event in hid-core.c.
+ * return > 0 - finish processing.
+ */
+static int ubt880_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ /*Just prevent further processing by hid*/
+ return 1;
+}
+static void ubt880_set_input(struct input_dev *input)
+{
+ /* Basics */
+ /*We have a key*/
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(BTN_LEFT, input->keybit);
+ __set_bit(BTN_RIGHT, input->keybit);
+ /*two absolute axis*/
+ __set_bit(EV_ABS, input->evbit);
+ __set_bit(ABS_X, input->absbit);
+ __set_bit(ABS_Y, input->absbit);
+ /*two absolute MT axis and tracking IDs*/
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, UBT880_MAX_AXIS_X, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, UBT880_MAX_AXIS_Y, 0, 0);
+ input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 3, 0, 0);
+ input_set_abs_params(input, ABS_X, 0, UBT880_MAX_AXIS_X, 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, UBT880_MAX_AXIS_Y, 0, 0);
+}
+
+static void ubt780_set_input(struct input_dev *input)
+{
+ input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
+ input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y);
+ set_bit(BTN_LEFT, input->keybit);
+ set_bit(BTN_RIGHT, input->keybit);
+
+ input->absmax[ABS_X] = UBT780_MAX_AXIS_X;
+ input->absmax[ABS_Y] = UBT780_MAX_AXIS_Y;
+ input->absmin[ABS_X] = 0;
+ input->absmin[ABS_Y] = 0;
+}
+
+int ubt_set_device(struct ubt880_data *data, __u32 devid)
+{
+ int ret;
+ data->calib.calibrated = 0;
+ data->ubt_packet.report = 0;
+ set_calib_to_device(data);
+ switch (devid) {
+ case USB_DEVICE_ID_PANABOARD_UBT780: {
+ data->switch_mode = ubt780_switch_mode;
+ data->set_input = ubt780_set_input;
+ break;
+ }
+ case USB_DEVICE_ID_PANABOARD_UBT880: {
+ data->switch_mode = ubt880_switch_mode;
+ data->set_input = ubt880_set_input;
+ break;
+ }
+ default: {
+ ret = -1;
+ }
+ }
+ return 0;
+}
+static int ubt880_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct ubt880_data *drvdata;
+ struct hid_input *hidinput = NULL;
+ struct input_dev *input;
+
+ UBT_DUMMY_DEBUG
+
+ drvdata = kmalloc(sizeof(struct ubt880_data), GFP_KERNEL);
+ if (!drvdata) {
+ dev_err(&hdev->dev, "cannot allocate UB-T880 data\n");
+ return -ENOMEM;
+ }
+
+ hid_set_drvdata(hdev, drvdata);
+
+ ret = hid_parse(hdev);
+ if (!ret) {
+ if (ubt_debug)
+ printk(KERN_DEBUG "Trying hid_hw_start");
+ /*We need HIDINPUT dev only. We have our own char device instead of hidraw*/
+ ret = hid_hw_start(hdev, HID_CONNECT_HIDINPUT);
+ if (ubt_debug)
+ printk(KERN_DEBUG "hid_hw_start() returned : %d", ret);
+ }
+
+ if (ret) {
+ kfree(drvdata);
+ goto skip_input;
+ }
+ ubt_chrdev_connect(hdev, drvdata);
+ ubt_set_device(drvdata, hdev->product);
+
+ drvdata->switch_mode(hdev, MODE_MOUSE);
+ drvdata->current_mode = MODE_MOUSE;
+
+ UBT_DUMMY_DEBUG
+ hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+ if (hidinput == NULL) {
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880: probe : Failed to get valid hidinput");
+ goto skip_input;
+ }
+ UBT_DUMMY_DEBUG
+ input = hidinput->input;
+
+ UBT_DUMMY_DEBUG
+ drvdata->set_input(input);
+skip_input:
+ return ret;
+}
+/* Our own char device for ioctls */
+/*---------------------------------------------------------------------------------------------*/
+
+
+static const struct file_operations ubt880_fops = {
+ .owner = THIS_MODULE,
+ .open = ubt880_open_io,
+ .release = ubt880_release_io,
+ .unlocked_ioctl = ubt880_ioctl,
+};
+
+static int ubt_chrdev_init(void)
+{
+ int result;
+ dev_t dev_id;
+
+ result = alloc_chrdev_region(&dev_id, UBT780_FIRST_MINOR,
+ UBT780_MAX_DEVICES, "ubt_chr");
+
+ ubt_major = MAJOR(dev_id);
+
+ if (result < 0) {
+ printk(KERN_WARNING "ubt: can't get major number\n");
+ result = 0;
+ goto out;
+ }
+
+ ubt_class = class_create(THIS_MODULE, "ubt_chr");
+ if (IS_ERR(ubt_class)) {
+ result = PTR_ERR(ubt_class);
+ unregister_chrdev(ubt_major, "ubt_chr");
+ goto out;
+ }
+
+ cdev_init(&ubt_cdev, &ubt880_fops);
+ cdev_add(&ubt_cdev, dev_id, UBT780_MAX_DEVICES);
+out:
+ return result;
+}
+
+static void ubt_chrdev_cleanup(void)
+{
+ dev_t dev_id = MKDEV(ubt_major, 0);
+ cdev_del(&ubt_cdev);
+ class_destroy(ubt_class);
+ unregister_chrdev_region(dev_id, UBT780_MAX_DEVICES);
+}
+static int ubt_chrdev_connect(struct hid_device *hid, struct ubt880_data *drvdata)
+{
+ int minor, result;
+ struct ubt_chrdev *dev;
+
+ dev = kzalloc(sizeof(struct ubt_chrdev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ result = -EINVAL;
+
+ mutex_lock(&minors_lock);
+
+ for (minor = 0; minor < UBT780_MAX_DEVICES; minor++) {
+ if (ubt_table[minor])
+ continue;
+ ubt_table[minor] = dev;
+ result = 0;
+ break;
+ }
+ UBT_DUMMY_DEBUG
+ printk(KERN_DEBUG "ubt_chrdev_connect : result = %X", result);
+
+ if (result) {
+ mutex_unlock(&minors_lock);
+ kfree(dev);
+ goto out;
+ }
+ printk(KERN_DEBUG "ubt : chrdev_connect : ubt_majo=%d, minor=%d", ubt_major, minor);
+ dev->dev = device_create(ubt_class, &hid->dev, MKDEV(ubt_major, minor),
+ NULL, "%s%d", "ubt_", minor);
+
+ if (IS_ERR(dev->dev)) {
+ ubt_table[minor] = NULL;
+ mutex_unlock(&minors_lock);
+ result = PTR_ERR(dev->dev);
+ kfree(dev);
+ drvdata->chrdev = NULL;
+ goto out;
+ }
+
+ UBT_DUMMY_DEBUG
+ printk(KERN_DEBUG "ubt_chrdev_connect : result = %X", result);
+
+ mutex_unlock(&minors_lock);
+
+ dev->hid = hid;
+ drvdata->chrdev = dev;
+ dev->minor = minor;
+
+ dev->exist = 1;
+
+out:
+ printk(KERN_DEBUG "ubt_chrdev_connect : result = %X", result);
+ return result;
+
+}
+
+static void ubt_chrdev_disconnect(struct hid_device *hid)
+{
+
+ struct ubt880_data *ubt880_drv = hid_get_drvdata(hid);
+ struct ubt_chrdev *ubt880 = ubt880_drv->chrdev;
+
+ if (!ubt880)
+ return;
+
+ ubt880->exist = 0;
+
+ mutex_lock(&minors_lock);
+ ubt_table[ubt880->minor] = NULL;
+ mutex_unlock(&minors_lock);
+
+ device_destroy(ubt_class, MKDEV(ubt_major, ubt880->minor));
+
+ if (ubt880->open) {
+ hid->ll_driver->close(hid);
+ } else {
+ kfree(ubt880);
+ }
+}
+
+
+static int ubt880_open_io(struct inode *node, struct file *file)
+{
+ unsigned int minor = iminor(node);
+ struct ubt_chrdev *device;
+ int error = 0;
+
+ mutex_lock(&minors_lock);
+ UBT_DUMMY_DEBUG
+ device = ubt_table[minor];
+
+ if (!device) {
+ printk(KERN_EMERG "ubt880 device with minor %d doesn't exist\n",
+ minor);
+ error = -ENODEV;
+ goto exit_unlock;
+ }
+
+ if (!device->open) {
+ device->open++;
+ /* power on device */
+ if (device->hid->ll_driver->power) {
+ error = device->hid->ll_driver->power(device->hid,
+ PM_HINT_FULLON);
+ if (error < 0) {
+ --device->open;
+ goto exit_unlock;
+ }
+ }
+ error = device->hid->ll_driver->open(device->hid);
+ if (error < 0) {
+ if (device->hid->ll_driver->power)
+ device->hid->ll_driver->power(device->hid,
+ PM_HINT_NORMAL);
+ --device->open;
+ goto exit_unlock;
+ }
+ } else {
+ device->open++;
+ /*error = -EBUSY;*/
+ }
+
+exit_unlock:
+ mutex_unlock(&minors_lock);
+ return error;
+}
+
+static int ubt880_release_io(struct inode *node, struct file *file)
+{
+ unsigned int minor = iminor(node);
+ struct ubt_chrdev *dev;
+ int ret = 0;
+ UBT_DUMMY_DEBUG
+ mutex_lock(&minors_lock);
+ if (!ubt_table[minor]) {
+ ret = -ENODEV;
+ goto unlock;
+ }
+
+ dev = ubt_table[minor];
+ if (dev->open) {
+ dev->open--;
+ if (dev->open)
+ goto unlock;
+ if (dev->hid->ll_driver->power)
+ dev->hid->ll_driver->power(dev->hid, PM_HINT_NORMAL);
+ dev->hid->ll_driver->close(dev->hid);
+ }
+
+ ret = 0;
+unlock:
+ mutex_unlock(&minors_lock);
+
+ return ret;
+}
+static void set_calib_to_driver(struct ubt_calib *calib)
+{
+
+ if (!calib)
+ return;
+ LTx = calib->LTx;
+ LTy = calib->LTy;
+ LBx = calib->LBx;
+ LBy = calib->LBy;
+ RTx = calib->RTx;
+ RTy = calib->RTy;
+ RBx = calib->RBx;
+ RBy = calib->RBy;
+
+ LTX = calib->LTX;
+ LTY = calib->LTY;
+ LBX = calib->LBX;
+ LBY = calib->LBY;
+ RTX = calib->RTX;
+ RTY = calib->RTY;
+ RBX = calib->RBX;
+ RBY = calib->RBY;
+
+ Xoff_A = calib->Xoff_A;
+ Xmag_A = calib->Xmag_A;
+ Xmag_B = calib->Xmag_B;
+ Yoff_A = calib->Yoff_A;
+ Ymag_A = calib->Ymag_A;
+ Ymag_B = calib->Ymag_B;
+
+ isCalibrated = 1;
+}
+
+
+static void set_calib_to_device(struct ubt880_data *drvdata)
+{
+
+ if (!drvdata)
+ return;
+ if (!isCalibrated)
+ return;
+ drvdata->calib.LTx = LTx;
+ drvdata->calib.LTy = LTy;
+ drvdata->calib.LBx = LBx;
+ drvdata->calib.LBy = LBy;
+ drvdata->calib.RTx = RTx;
+ drvdata->calib.RTy = RTy;
+ drvdata->calib.RBx = RBx;
+ drvdata->calib.RBy = RBy;
+
+ drvdata->calib.LTX = LTX;
+ drvdata->calib.LTY = LTY;
+ drvdata->calib.LBX = LBX;
+ drvdata->calib.LBY = LBY;
+ drvdata->calib.RTX = RTX;
+ drvdata->calib.RTY = RTY;
+ drvdata->calib.RBX = RBX;
+ drvdata->calib.RBY = RBY;
+
+ drvdata->calib.Xoff_A = Xoff_A;
+ drvdata->calib.Xmag_A = Xmag_A;
+ drvdata->calib.Xmag_B = Xmag_B;
+ drvdata->calib.Yoff_A = Yoff_A;
+ drvdata->calib.Ymag_A = Ymag_A;
+ drvdata->calib.Ymag_B = Ymag_B;
+
+ drvdata->calib.calibrated = 1;
+}
+
+static long ubt880_ioctl(struct file *iofile, unsigned int command, unsigned long data)
+{
+
+ int retval = 0;
+ struct inode *inode = iofile->f_path.dentry->d_inode;
+ unsigned int minor = iminor(inode);
+ struct ubt_chrdev *dev;
+ struct ubt880_data *drvdata;
+ mutex_lock(&minors_lock);
+ dev = ubt_table[minor];
+ if (!dev) {
+ retval = -ENODEV;
+ goto out;
+ }
+ drvdata = hid_get_drvdata(dev->hid);
+ switch (command) {
+ case GET_BATTERY_STATUS:
+ {
+ int *in = (int *) data;
+ *in = 0;
+ retval = 0;
+ break;
+ }
+ case GET_LAST_PACKET_OLD:
+ case GET_LAST_PACKET:
+ {
+ struct ubt880_dgtzr *packsrc = &drvdata->ubt_packet;
+ struct ubt880_dgtzr *packdst = (struct ubt880_dgtzr *) data;
+
+ if (packsrc->report != 0x00) {
+ memcpy((void *)packdst, (void *)packsrc, sizeof(struct ubt880_dgtzr));
+ packsrc->report = 0;
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880_ioctl_io : GET_LAST_PACKET2");
+ }
+
+ retval = 0;
+ break;
+ }
+ case GET_MODE:
+ {
+ int *in = (int *) data;
+ printk(KERN_DEBUG "ubt880_ioctl_io : GET_MODE");
+ *in = drvdata->current_mode;
+ retval = 0;
+ break;
+ }
+ case SET_MODE:
+ {
+ int *dt = (int *)data;
+ printk(KERN_DEBUG "ubt_ioctl_io : SET_MODE");
+ drvdata->ubt_packet.report = 0;
+
+ if (drvdata->switch_mode(dev->hid, *dt) != 0) {
+ retval = -EIO;
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt_ioctl_io : SET_MODE error");
+ } else {
+ drvdata->current_mode = *dt;
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt_ioctl_io : SET_MODE ok, mode = %d", drvdata->current_mode);
+ retval = 0;
+ }
+ break;
+ }
+ case SET_CALIB: {
+ struct ubt_calib *calib = (struct ubt_calib *) data;
+
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880_ioctl_io : SET_CALIB");
+
+ set_calib_to_driver(calib);
+ set_calib_to_device(drvdata);
+
+ retval = 0;
+ break;
+ }
+ case GET_DEVICE_ID: {
+ int *in = (int *) data;
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt_ioctl_io : get device id");
+ *in = dev->hid->product;
+ retval = 0;
+ break;
+ }
+#ifdef UBT780_DEBUG
+ case TEST_MT_PACKET: {
+
+ send_test_packet(dev->hid);
+ retval = 0;
+ break;
+ }
+ case TEST_CALIBRATION: {
+
+ unsigned short *coord = (unsigned short *)data;
+ fake_calibration(dev->hid, coord);
+ retval = 0;
+ break;
+ }
+#endif
+ default:
+ {
+ retval = -EIO;
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880_ioctl_io : unknown command %d", command);
+ break;
+ }
+ }
+out:
+ mutex_unlock(&minors_lock);
+ return retval;
+}
+/*-----------------------------------------------------------------------------------------------*/
+static void ubt_report_input(struct input_dev *input, unsigned int x, unsigned int y, int btn_left, int btn_right)
+{
+ /* To prevent situation when new coords arrive before unpess */
+ /* and a line is drawn istead of 2 dots */
+ input_report_key(input, BTN_LEFT, btn_left);
+ input_report_key(input, BTN_RIGHT, btn_right);
+ /*if (btn)*/
+ input_report_abs(input, ABS_X, x);
+ input_report_abs(input, ABS_Y, y);
+
+ input_sync(input);
+}
+/* Debug output of raw MT packet from device */
+static void ubt880_print_multitouch(struct ubt_mt_contact *pack, int size)
+{
+ int i;
+ printk(KERN_DEBUG "-------------------------------------");
+ for (i = 0; i < size; i++) {
+ printk(KERN_DEBUG "-----------%d------------", i);
+ printk(KERN_DEBUG "ubt880: mt packet: flags : inrange %X | tipswitch %X", pack[i].flags & 0x02, pack[i].flags & 0x01);
+ printk(KERN_DEBUG "ubt880: mt packet: id | %d", pack[i].id);
+ printk(KERN_DEBUG "ubt880: mt packet: X | %d", pack[i].x);
+ printk(KERN_DEBUG "ubt880: mt packet: Y | %d", pack[i].y);
+ printk(KERN_DEBUG "-------------------------");
+ }
+ printk(KERN_DEBUG "ubt880: mt packet: count: %d", size);
+}
+/* Report MT to the input subsystem*/
+static void ubt880_report_contact(struct input_dev *input, struct ubt_mt_contact *contact)
+{
+ if (!contact || !input)
+ return;
+ input_report_abs(input, ABS_MT_TRACKING_ID, contact->id);
+ input_report_abs(input, ABS_MT_POSITION_X, contact->x);
+ input_report_abs(input, ABS_MT_POSITION_Y, contact->y);
+ input_mt_sync(input);
+}
+static void ubt880_report_mt(struct input_dev *input, struct ubt_mt_contact *pack, int size, struct ubt_calib *calib)
+{
+ int i = 0;
+ /* Report MT contacts */
+ if (size < 1)
+ return;
+ if (!input || !pack || !calib)
+ return;
+
+ for (i = 0; i < size; i++) {
+ /* If Tip Switch bit is set */
+ if (pack[i].flags & 0x01) {
+ if (calib->calibrated) {
+ ubt_calibrate(pack[i].x,
+ pack[i].y,
+ (int *)&pack[i].x,
+ (int *)&pack[i].y,
+ calib);
+ }
+ ubt880_report_contact(input, &pack[i]);
+ }
+ }
+ input_sync(input);
+ /* Emulate single-touch device. Only first contact is used. */
+ /* Note that is already calibrated */
+ ubt_report_input(input, pack[0].x, pack[0].y, pack[0].flags & 0x01, 0);
+}
+
+#ifdef UBT780_DEBUG
+static void fake_calibration(struct hid_device *hdev, unsigned short *coord)
+{
+ char pack[6];
+ unsigned short *pack_coord = (unsigned short *)&pack[2];
+ pack[0] = 0x01;
+ pack[1] = coord[0];
+ pack_coord[0] = coord[1];
+ pack_coord[1] = coord[2];
+ ubt880_raw_event(hdev, 0, (u8 *)&pack, 6);
+}
+static void send_test_packet(struct hid_device *hdev)
+{
+ char testdata[20];
+ struct ubt_mt_contact *contacts;
+ struct ubt_calib calib;
+
+ calib.calibrated = 0;
+
+ testdata[0] = 0x03;
+ contacts = (struct ubt_mt_contact *)&testdata[1];
+ contacts[0].flags = 0x01;
+ contacts[0].id = 0x01;
+ contacts[0].x = 205;
+ contacts[0].y = 1023;
+
+ contacts[1].flags = 0x01;
+ contacts[1].id = 0x02;
+ contacts[1].x = 1283;
+ contacts[1].y = 1048;
+
+ contacts[2].flags = 0x01;
+ contacts[2].id = 0x03;
+ contacts[2].x = 508;
+ contacts[2].y = 2473;
+
+ testdata[19] = 3;
+
+ ubt880_raw_event(hdev, 0, (u8 *)&testdata, 20);
+}
+#endif
+
+static struct input_dev *ubt880_get_input(struct hid_device *hdev)
+{
+ struct hid_input *hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+ struct input_dev *input;
+
+ if (!hidinput)
+ return 0;
+ input = hidinput->input;
+ return input;
+}
+static int ubt880_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
+{
+ struct ubt880_data *driver_data = hid_get_drvdata(hdev);
+ struct ubt880_dgtzr *pack = &driver_data->ubt_packet;
+
+ struct input_dev *input = ubt880_get_input(hdev);
+ if (!input)
+ return -1;
+
+ if (!driver_data)
+ return -1;
+ /*Save the packet for userspace processing*/
+ /*Mouse mode packet*/
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880:raw_event: report = %X", data[0]);
+ switch (data[0]) {
+ case 0x01: {
+ int X, Y;
+ memcpy((void *)pack, (void *)data, size);
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880_mode: Mouse");
+
+ if (driver_data->current_mode == MODE_UKN)
+ driver_data->current_mode = MODE_MOUSE;
+
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880: mouse packet: X=%d,Y=%d,Button=%d",
+ pack->data[0], pack->data[1], pack->command);
+ X = pack->data[0];
+ Y = pack->data[1];
+ if (driver_data->calib.calibrated) {
+ ubt_calibrate(X, Y, &X, &Y, &driver_data->calib);
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880: mouse packet calibrated: X=%d,Y=%d",
+ X, Y);
+ }
+
+ ubt_report_input(input, X, Y, pack->command & 0x01, pack->command & 0x02);
+ /*Switch to digitizer*/
+ if (driver_data->current_mode != MODE_MOUSE)
+ ubt880_switch_mode(hdev, MODE_MOUSE);
+ break;
+ }
+ case 0x02: {
+ struct ubt780_dgtzr *pack = (struct ubt780_dgtzr *)data;
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt780_mode: DIG");
+ if (driver_data->current_mode == MODE_UKN)
+ driver_data->current_mode = MODE_DGTZR;
+
+ if (driver_data->current_mode == MODE_MOUSE) {
+ pack->report = 0;
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt780_current_mode: MOUSE");
+ /*Switch to mouse*/
+ driver_data->switch_mode(hdev, MODE_MOUSE);
+ } else if (driver_data->current_mode == MODE_DGTZR) {
+ unsigned short *pCoord = (unsigned short *)(&pack->data[3]);
+ struct ubt_calib *calib = &driver_data->calib;
+ int X = (int) pCoord[0];
+ int Y = (int) pCoord[1];
+ int leftBtn = pack->data[2] >> 5 & 0x01;
+ int rightBtn = pack->data[2] >> 4 & 0x01;
+
+ ubt_pen_to_int(&X, &Y);
+
+ driver_data->ubt_packet.report = 0x02;
+ driver_data->ubt_packet.command = pack->data[2];
+ driver_data->ubt_packet.data[0] = X;
+ driver_data->ubt_packet.data[1] = Y;
+
+ if (driver_data->calib.calibrated) {
+ if (ubt_calibrate(X, Y, &X, &Y, calib)) {
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt780_mode:\
+ Calibrated;\
+ x=%d y=%d,left_btn=%d\n",
+ X, Y, leftBtn);
+ ubt_report_input(input, X, Y, leftBtn, rightBtn);
+ }
+ } else {
+ ubt_report_input(input, X, Y, leftBtn, rightBtn);
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt780_mode:\
+ Not calibrated;\
+ x=%d y=%d,left_btn=%d\n",
+ X, Y, leftBtn);
+ }
+ }
+ break;
+ }
+ case 0x03: {
+ struct ubt_mt_packet *packet = (struct ubt_mt_packet *)data;
+ if (ubt_debug) {
+ printk(KERN_DEBUG "ubt880_mode: Multitouch");
+ printk(KERN_DEBUG "ubt880_driver_mode : %d", driver_data->current_mode);
+ }
+ if (driver_data->current_mode == MODE_UKN)
+ driver_data->current_mode = MODE_DGTZR;
+
+ if (ubt_debug)
+ ubt880_print_multitouch((struct ubt_mt_contact *)&packet->data[1], packet->data[19]);
+
+ if (driver_data->current_mode == MODE_MOUSE) {
+ driver_data->switch_mode(hdev, MODE_MOUSE);
+ } else if (driver_data->current_mode == MODE_DGTZR) {
+ ubt880_report_mt(input, (struct ubt_mt_contact *)&packet->data[1], packet->data[19], &driver_data->calib);
+ }
+ break;
+ }
+ default:
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880: raw_report: Unknown report %X", pack->report);
+ }
+
+
+ UBT_DUMMY_DEBUG
+ return 0;
+}
+static void ubt880_remove(struct hid_device *hdev)
+{
+ UBT_DUMMY_DEBUG
+ ubt_chrdev_disconnect(hdev);
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static struct hid_device_id ubt880_devices[] = {
+ { HID_USB_DEVICE(0x04da, 0x104d) },
+ { HID_USB_DEVICE(0x04da, 0x1044) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, ubt880_devices);
+
+static struct hid_driver ubt880_driver = {
+ .name = "ubt880",
+ .id_table = ubt880_devices,
+ .probe = ubt880_probe,
+ .remove = ubt880_remove,
+ .input_mapping = ubt880_input_mapping,
+ .raw_event = ubt880_raw_event,
+ .event = ubt880_event,
+};
+
+static int __init ubt880_init(void)
+{
+ int retval = ubt_chrdev_init();
+ retval = hid_register_driver(&ubt880_driver);
+ UBT_DUMMY_DEBUG
+ if (ubt_debug)
+ printk(KERN_DEBUG "ubt880 : init : chrdev_init : retval = %X", retval);
+ return retval;
+}
+
+static void __exit ubt880_exit(void)
+{
+ UBT_DUMMY_DEBUG
+ hid_unregister_driver(&ubt880_driver);
+ ubt_chrdev_cleanup();
+}
+
+module_init(ubt880_init);
+module_exit(ubt880_exit);
+
+MODULE_AUTHOR("Anton Chikin <kverlin@xxxxxxxxx>");
+MODULE_DESCRIPTION("Panasonic UB-T780 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-ubt880.h b/drivers/hid/hid-ubt880.h
new file mode 100644
index 0000000..961b03f
--- /dev/null
+++ b/drivers/hid/hid-ubt880.h
@@ -0,0 +1,162 @@
+/*
+ * USB HID driver for Panasonic elite Panaboard UTB780
+ * Copyright (c) 2008 Igor Shakirov, Victor Grenke <comp.vision@xxxxxxxxx>
+ * Copyright (c) 2010-2011 Anton Chikin<anton.chikin@xxxxxxxxxxx> for Panasonic.
+ *
+ * Information.
+ * It's driver for supporting Panasonic Elite Panaboard HID USB device.
+ *
+ * This file is part of USB HID driver for Panasonic elite Panaboard UTB780.
+ *
+ * This driver is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/hid.h>
+#ifndef UBT780CTRL
+#define UBT780CTRL
+
+/*IOCTRL codes*/
+/** Battary status IOCTL defines */
+#define GET_BATTERY_STATUS 0x01 /*get battery status, return BATTERY_STATUS_UKN, BATTERY_STATUS_FINE, BATTERY_STATUS_WEAK*/
+#define GET_LAST_PACKET_OLD 0x02 /*get last packet (ubt780_dgtzr). It is necessary for calibration*/
+
+/** Modes of work IOCTL */
+#define GET_MODE 0x10 /*get current mode, return MODE_MOUSE, MODE_DGTZR*/
+#define SET_MODE 0x11 /*switch to mouse mode, MODE_MOUSE, MODE_DGTZR*/
+#define SET_CALIB 0x20 /*set calibration mode*/
+#define GET_LAST_PACKET 0x21 /*get last packet (ubt780_dgtzr). It is necessary for calibration*/
+#define GET_DEVICE_ID 0x22 /*get device id to recognize the device version*/
+#define TEST_MT_PACKET 0x23
+#define TEST_CALIBRATION 0x24
+/*return values for ioctrl*/
+/** Battary status defines */
+#define BATTERY_STATUS_FINE 0x00 /*battery is fine*/
+#define BATTERY_STATUS_WEAK 0x01 /*battery is weak*/
+#define BATTERY_STATUS_UKN 0x02 /*unknown status. Status will be known after the first pen touch*/
+
+/** Mode status defines */
+#define MODE_MOUSE 0x10 /*current mode is mouse*/
+#define MODE_DGTZR 0x11 /*current mode is digitizer*/
+#define MODE_UKN 0x12 /*current mode is unknown. It will be known after the first pen touch*/
+#define MODE_SINGLETOUCH 0x13
+
+/*Char device declarations*/
+#define UBT780_MAX_DEVICES 0x05
+#define UBT780_FIRST_MINOR 0
+
+#define UBT780_MAX_AXIS_X 4095
+#define UBT780_MAX_AXIS_Y 4095
+#define UBT880_MAX_AXIS_X 32767
+#define UBT880_MAX_AXIS_Y 32767
+#define NUM_CONTACTS 0x03
+/** Digitizer mode stucture: contains packet data */
+struct ubt880_dgtzr {
+ /** Report contains the type of packet: 0 - mouse, 1 - digitize */
+ unsigned char report;
+ /** Command is coming from device */
+ unsigned char command;
+ /** Packet size */
+ unsigned short data[2];
+};
+
+struct ubt780_dgtzr {
+ /** Report contains the type of packet: 0 - mouse, 1 - digitize */
+ unsigned char report;
+ /** Command is coming from device */
+ unsigned char command;
+ /** Packet size */
+ unsigned char number;
+ /** Data part of packet */
+ unsigned char data[17];
+};
+/** Calibration stucture: contains calibration data */
+struct ubt_calib {
+ /** Screen coordinates: Left Top X */
+ int LTx;
+ /** Screen coordinates: Left Top Y */
+ int LTy;
+ /** Screen coordinates: Left Bottom X */
+ int LBx;
+ /** Screen coordinates: Left Bottom Y */
+ int LBy;
+ /** Screen coordinates: Right Top X */
+ int RTx;
+ /** Screen coordinates: Right Top Y */
+ int RTy;
+ /** Screen coordinates: Right Bottom X */
+ int RBx;
+ /** Screen coordinates: Right Bottom Y */
+ int RBy;
+
+ /** Board coordinates: Left Top X */
+ int LTX;
+ /** Board coordinates: Left Top Y */
+ int LTY;
+ /** Board coordinates: Left Bottom X */
+ int LBX;
+ /** Board coordinates: Left Bottom Y */
+ int LBY;
+ /** Board coordinates: Right Top X */
+ int RTX;
+ /** Board coordinates: Right Top Y */
+ int RTY;
+ /** Board coordinates: Right Bottom X */
+ int RBX;
+ /** Board coordinates: Right Bottom Y */
+ int RBY;
+
+ /** Calculated values */
+ int Xoff_A;
+ int Xmag_A;
+ int Xmag_B;
+ int Yoff_A;
+ int Ymag_A;
+ int Ymag_B;
+ int calibrated;
+};
+/*Character device data structure*/
+struct ubt_chrdev {
+ unsigned int minor;
+ int exist;
+ int open;
+ struct hid_device *hid;
+ struct device *dev;
+};
+/*Driver data structure*/
+struct ubt780_data {
+ struct ubt_calib calib;
+ struct ubt780_dgtzr ubt_packet;
+ struct ubt_chrdev *chrdev;
+ unsigned char current_mode;
+};
+
+struct ubt880_data {
+ struct ubt_calib calib;
+ struct ubt880_dgtzr ubt_packet;
+ struct ubt_chrdev *chrdev;
+ unsigned char current_mode;
+ int (*switch_mode) (struct hid_device *hid, unsigned char mode);
+ void (*set_input) (struct input_dev *input);
+};
+/*ubt880 multitouch structures*/
+struct ubt_mt_contact {
+ unsigned char flags;
+ unsigned char id;
+ unsigned short x;
+ unsigned short y;
+};
+struct ubt_mt_packet {
+ unsigned char data[20];
+};
+#endif /* UBT780CTRL */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/