[PATCH] pch_gbe: Fix the MAC Address load issue.
From: Toshiharu Okada
Date: Mon Feb 14 2011 - 03:52:53 EST
With the specification of hardware,
the processing at the time of driver starting was modified.
This device write automatically the MAC address read from serial ROM
into a MAC Adress1A/1B register at the time of power on reset.
However, when stable clock is not supplied,
the writing of MAC Adress1A/1B register may not be completed.
In this case, it is necessary to load MAC address to MAC Address1A/1B register
by the MAC Address1 load register.
This patch always does the above processing,
in order not to be dependent on system environment.
Signed-off-by: Toshiharu Okada <toshiharu-linux@xxxxxxxxxxxxxxx>
---
drivers/net/pch_gbe/pch_gbe.h | 2 +-
drivers/net/pch_gbe/pch_gbe_main.c | 7 +++++++
2 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h
index a0c26a9..e1e33c8 100644
--- a/drivers/net/pch_gbe/pch_gbe.h
+++ b/drivers/net/pch_gbe/pch_gbe.h
@@ -73,7 +73,7 @@ struct pch_gbe_regs {
struct pch_gbe_regs_mac_adr mac_adr[16];
u32 ADDR_MASK;
u32 MIIM;
- u32 reserve2;
+ u32 MAC_ADDR_LOAD;
u32 RGMII_ST;
u32 RGMII_CTRL;
u32 reserve3[3];
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 8ec48ad..8bba091 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -89,6 +89,12 @@ static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT;
static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg);
static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg,
int data);
+
+inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw)
+{
+ iowrite32(0x01, &hw->reg->MAC_ADDR_LOAD);
+}
+
/**
* pch_gbe_mac_read_mac_addr - Read MAC address
* @hw: Pointer to the HW structure
@@ -2333,6 +2339,7 @@ static int pch_gbe_probe(struct pci_dev *pdev,
netdev->features = NETIF_F_HW_CSUM | NETIF_F_GRO;
pch_gbe_set_ethtool_ops(netdev);
+ pch_gbe_mac_load_mac_addr(&adapter->hw);
pch_gbe_mac_reset_hw(&adapter->hw);
/* setup the private structure */
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/