[256/272] drm/i915/sdvo: Defer detection of output capabilities until probing

[Greg KH]

2.6.37-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>

commit 97aaf910731b03b27b1c4c8a58006a1dc99dcd9a upstream.

Alex Fiestas reported an issue with his HDMI connector being misdetected
as DVI unless he had something connected upon boot. By moving the
decision as to whether to use HDMI or DVI encoding for the HDMI capable
output until we probe the monitor means that we should avoid sending a
HDMI signal to a DVI monitor and also correctly detect hardware like
Alex's.

However, to really determine what connector is soldered onto the wire we
need to inspect the VBT sdvo child devices - but can we trust it?

Reported-by: Alex Fiestas <alex@xxxxxxxxx>
Tested-by: Alex Fiestas <alex@xxxxxxxxx>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32828
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
 drivers/gpu/drm/i915/intel_sdvo.c |   33 +++++++++++----------------------
 1 file changed, 11 insertions(+), 22 deletions(-)

--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1024,9 +1024,13 @@ static void intel_sdvo_mode_set(struct d
 	if (!intel_sdvo_set_target_input(intel_sdvo))
 		return;
 
-	if (intel_sdvo->has_hdmi_monitor &&
-	    !intel_sdvo_set_avi_infoframe(intel_sdvo))
-		return;
+	if (intel_sdvo->has_hdmi_monitor) {
+		intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI);
+		intel_sdvo_set_colorimetry(intel_sdvo,
+					   SDVO_COLORIMETRY_RGB256);
+		intel_sdvo_set_avi_infoframe(intel_sdvo);
+	} else
+		intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_DVI);
 
 	if (intel_sdvo->is_tv &&
 	    !intel_sdvo_set_tv_format(intel_sdvo))
@@ -1395,6 +1399,9 @@ intel_sdvo_detect(struct drm_connector *
 
 	intel_sdvo->attached_output = response;
 
+	intel_sdvo->has_hdmi_monitor = false;
+	intel_sdvo->has_hdmi_audio = false;
+
 	if ((intel_sdvo_connector->output_flag & response) == 0)
 		ret = connector_status_disconnected;
 	else if (response & SDVO_TMDS_MASK)
@@ -1919,20 +1926,7 @@ intel_sdvo_select_i2c_bus(struct drm_i91
 static bool
 intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo, int device)
 {
-	int is_hdmi;
-
-	if (!intel_sdvo_check_supp_encode(intel_sdvo))
-		return false;
-
-	if (!intel_sdvo_set_target_output(intel_sdvo,
-					  device == 0 ? SDVO_OUTPUT_TMDS0 : SDVO_OUTPUT_TMDS1))
-		return false;
-
-	is_hdmi = 0;
-	if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ENCODE, &is_hdmi, 1))
-		return false;
-
-	return !!is_hdmi;
+	return intel_sdvo_check_supp_encode(intel_sdvo);
 }
 
 static u8
@@ -2034,12 +2028,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *i
 	connector->connector_type = DRM_MODE_CONNECTOR_DVID;
 
 	if (intel_sdvo_is_hdmi_connector(intel_sdvo, device)) {
-		/* enable hdmi encoding mode if supported */
-		intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI);
-		intel_sdvo_set_colorimetry(intel_sdvo,
-					   SDVO_COLORIMETRY_RGB256);
 		connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
-
 		intel_sdvo->is_hdmi = true;
 	}
 	intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/