[013/272] USB: serial: handle Data Carrier Detect changes

From: Greg KH
Date: Tue Feb 15 2011 - 21:18:23 EST

Next message: Greg KH: "[008/272] libata: set queue DMA alignment to sector size for ATAPI too"
Previous message: Greg KH: "[014/272] USB: CP210x Add two device IDs"
In reply to: Greg KH: "[014/272] USB: CP210x Add two device IDs"
Next in thread: Greg KH: "[008/272] libata: set queue DMA alignment to sector size for ATAPI too"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

2.6.37-stable review patch. If anyone has any objections, please let us know.

------------------

From: Libor Pechacek <lpechacek@xxxxxxx>

commit d14fc1a74e846d7851f24fc9519fe87dc12a1231 upstream.

Alan's commit 335f8514f200e63d689113d29cb7253a5c282967 introduced
.carrier_raised function in several drivers. That also means
tty_port_block_til_ready can now suspend the process trying to open the serial
port when Carrier Detect is low and put it into tty_port.open_wait queue. We
need to wake up the process when Carrier Detect goes high and trigger TTY
hangup when CD goes low.

Some of the devices do not report modem status line changes, or at least we
don't understand the status message, so for those we remove .carrier_raised
again.

Signed-off-by: Libor Pechacek <lpechacek@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
drivers/usb/serial/ch341.c | 10 ++++++++++
drivers/usb/serial/cp210x.c | 13 +------------
drivers/usb/serial/digi_acceleport.c | 10 ----------
drivers/usb/serial/generic.c | 20 ++++++++++++++++++++
drivers/usb/serial/keyspan_pda.c | 17 -----------------
drivers/usb/serial/pl2303.c | 11 +++++++++++
drivers/usb/serial/spcp8x5.c | 6 +++++-
include/linux/usb/serial.h | 3 +++
8 files changed, 50 insertions(+), 40 deletions(-)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -486,12 +486,22 @@ static void ch341_read_int_callback(stru
if (actual_length >= 4) {
struct ch341_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
+ u8 prev_line_status = priv->line_status;

spin_lock_irqsave(&priv->lock, flags);
priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
if ((data[1] & CH341_MULT_STAT))
priv->multi_status_change = 1;
spin_unlock_irqrestore(&priv->lock, flags);
+
+ if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) {
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty)
+ usb_serial_handle_dcd_change(port, tty,
+ priv->line_status & CH341_BIT_DCD);
+ tty_kref_put(tty);
+ }
+
wake_up_interruptible(&priv->delta_msr_wait);
}

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -49,7 +49,6 @@ static int cp210x_tiocmset_port(struct u
static void cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_startup(struct usb_serial *);
static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
-static int cp210x_carrier_raised(struct usb_serial_port *p);

static int debug;

@@ -165,8 +164,7 @@ static struct usb_serial_driver cp210x_d
.tiocmget = cp210x_tiocmget,
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
- .dtr_rts = cp210x_dtr_rts,
- .carrier_raised = cp210x_carrier_raised
+ .dtr_rts = cp210x_dtr_rts
};

/* Config request types */
@@ -765,15 +763,6 @@ static int cp210x_tiocmget (struct tty_s
return result;
}

-static int cp210x_carrier_raised(struct usb_serial_port *p)
-{
- unsigned int control;
- cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1);
- if (control & CONTROL_DCD)
- return 1;
- return 0;
-}
-
static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -455,7 +455,6 @@ static int digi_write_room(struct tty_st
static int digi_chars_in_buffer(struct tty_struct *tty);
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
static void digi_close(struct usb_serial_port *port);
-static int digi_carrier_raised(struct usb_serial_port *port);
static void digi_dtr_rts(struct usb_serial_port *port, int on);
static int digi_startup_device(struct usb_serial *serial);
static int digi_startup(struct usb_serial *serial);
@@ -511,7 +510,6 @@ static struct usb_serial_driver digi_acc
.open = digi_open,
.close = digi_close,
.dtr_rts = digi_dtr_rts,
- .carrier_raised = digi_carrier_raised,
.write = digi_write,
.write_room = digi_write_room,
.write_bulk_callback = digi_write_bulk_callback,
@@ -1339,14 +1337,6 @@ static void digi_dtr_rts(struct usb_seri
digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
}

-static int digi_carrier_raised(struct usb_serial_port *port)
-{
- struct digi_port *priv = usb_get_serial_port_data(port);
- if (priv->dp_modem_signals & TIOCM_CD)
- return 1;
- return 0;
-}
-
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int ret;
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -479,6 +479,26 @@ int usb_serial_handle_break(struct usb_s
}
EXPORT_SYMBOL_GPL(usb_serial_handle_break);

+/**
+ * usb_serial_handle_dcd_change - handle a change of carrier detect state
+ * @port: usb_serial_port structure for the open port
+ * @tty: tty_struct structure for the port
+ * @status: new carrier detect status, nonzero if active
+ */
+void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+ struct tty_struct *tty, unsigned int status)
+{
+ struct tty_port *port = &usb_port->port;
+
+ dbg("%s - port %d, status %d", __func__, usb_port->number, status);
+
+ if (status)
+ wake_up_interruptible(&port->open_wait);
+ else if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change);
+
int usb_serial_generic_resume(struct usb_serial *serial)
{
struct usb_serial_port *port;
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -679,22 +679,6 @@ static void keyspan_pda_dtr_rts(struct u
}
}

-static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
-{
- struct usb_serial *serial = port->serial;
- unsigned char modembits;
-
- /* If we can read the modem status and the DCD is low then
- carrier is not raised yet */
- if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
- if (!(modembits & (1>>6)))
- return 0;
- }
- /* Carrier raised, or we failed (eg disconnected) so
- progress accordingly */
- return 1;
-}
-

static int keyspan_pda_open(struct tty_struct *tty,
struct usb_serial_port *port)
@@ -881,7 +865,6 @@ static struct usb_serial_driver keyspan_
.id_table = id_table_std,
.num_ports = 1,
.dtr_rts = keyspan_pda_dtr_rts,
- .carrier_raised = keyspan_pda_carrier_raised,
.open = keyspan_pda_open,
.close = keyspan_pda_close,
.write = keyspan_pda_write,
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -677,9 +677,11 @@ static void pl2303_update_line_status(st
{

struct pl2303_private *priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty;
unsigned long flags;
u8 status_idx = UART_STATE;
u8 length = UART_STATE + 1;
+ u8 prev_line_status;
u16 idv, idp;

idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
@@ -701,11 +703,20 @@ static void pl2303_update_line_status(st

/* Save off the uart status for others to look at */
spin_lock_irqsave(&priv->lock, flags);
+ prev_line_status = priv->line_status;
priv->line_status = data[status_idx];
spin_unlock_irqrestore(&priv->lock, flags);
if (priv->line_status & UART_BREAK_ERROR)
usb_serial_handle_break(port);
wake_up_interruptible(&priv->delta_msr_wait);
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+ if ((priv->line_status ^ prev_line_status) & UART_DCD)
+ usb_serial_handle_dcd_change(port, tty,
+ priv->line_status & UART_DCD);
+ tty_kref_put(tty);
}

static void pl2303_read_int_callback(struct urb *urb)
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -133,7 +133,7 @@ struct spcp8x5_usb_ctrl_arg {

/* how come ??? */
#define UART_STATE 0x08
-#define UART_STATE_TRANSIENT_MASK 0x74
+#define UART_STATE_TRANSIENT_MASK 0x75
#define UART_DCD 0x01
#define UART_DSR 0x02
#define UART_BREAK_ERROR 0x04
@@ -525,6 +525,10 @@ static void spcp8x5_process_read_urb(str
/* overrun is special, not associated with a char */
if (status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ if (status & UART_DCD)
+ usb_serial_handle_dcd_change(port, tty,
+ priv->line_status & MSR_STATUS_LINE_DCD);
}

tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -347,6 +347,9 @@ extern int usb_serial_generic_prepare_wr
extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
unsigned int ch);
extern int usb_serial_handle_break(struct usb_serial_port *port);
+extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+ struct tty_struct *tty,
+ unsigned int status);

extern int usb_serial_bus_register(struct usb_serial_driver *device);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Greg KH: "[008/272] libata: set queue DMA alignment to sector size for ATAPI too"
Previous message: Greg KH: "[014/272] USB: CP210x Add two device IDs"
In reply to: Greg KH: "[014/272] USB: CP210x Add two device IDs"
Next in thread: Greg KH: "[008/272] libata: set queue DMA alignment to sector size for ATAPI too"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]