Re: [RFC 1/2 -tip/master] x86, x2apic: minimize IPI register writesusing cluster groups

From: Ingo Molnar
Date: Wed Feb 16 2011 - 04:23:21 EST



* Cyrill Gorcunov <gorcunov@xxxxxxxxx> wrote:

> On 2/15/11, Ingo Molnar <mingo@xxxxxxx> wrote:
> >
> > * Cyrill Gorcunov <gorcunov@xxxxxxxxx> wrote:
> >
> >> On 02/14/2011 02:45 PM, Ingo Molnar wrote:
> >> >
> >> >* Cyrill Gorcunov<gorcunov@xxxxxxxxx> wrote:
> >> >
> >> >>In the case of x2apic cluster mode we can group IPI register writes
> >> >> based on the
> >> >>cluster group instead of individual per-cpu destiantion messages. This
> >> >> reduces the
> >> >>apic register writes and reduces the amount of IPI messages (in the best
> >> >> case we
> >> >>can reduce it by a factor of 16).
> >> >>
> >> >>With this change, microbenchmark measuring the cost of
> >> >> flush_tlb_others(), with
> >> >>the flush tlb IPI being sent from a cpu in the socket-1 to all the
> >> >> logical cpus in
> >> >>socket-2 (on a Westmere-EX system that has 20 logical cpus in a socket)
> >> >> is 3x
> >> >>times better now (compared to the former 'send one-by-one' algorithm).
> >> >
> >> >Pretty nice!
> >> >
> >> >I have a few structural and nitpicking comments:
> >>
> >> Thanks a lot for review, Ingo! I'll address all the nits during this week.
> >>
> >> ...
> >> >
> >> >>+void x2apic_init_cpu_notifier(void)
> >> >>+{
> >> >>+ int cpu = smp_processor_id();
> >> >>
> >> >>+ zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL);
> >> >>+ zalloc_cpumask_var(&per_cpu(ipi_mask, cpu), GFP_KERNEL);
> >> >>+ BUG_ON(!per_cpu(cpus_in_cluster, cpu) || !per_cpu(ipi_mask, cpu));
> >> >
> >> >Such a BUG_ON() is not particularly user friendly - and this could
> >> > trigger during
> >> >CPU hotplug events, i.e. while the system is fully booted up, right?
> >> >
> >> >Thanks,
> >> >
> >> > Ingo
> >>
> >> Yup is not that much friendly but it's called during system bootup,
> >> hotplug events are handled by
> >>
> >> +static int __cpuinit
> >> +cluster_setup(struct notifier_block *nfb, unsigned long action, void
> >> *hcpu)
> >> +{
> >> + unsigned int cpu = (unsigned long)hcpu;
> >> + int err = 0;
> >> +
> >> + switch (action) {
> >> + case CPU_UP_PREPARE:
> >> + zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL);
> >> + zalloc_cpumask_var(&per_cpu(ipi_mask, cpu), GFP_KERNEL);
> >> + if (!per_cpu(cpus_in_cluster, cpu) || !per_cpu(ipi_mask, cpu)) {
> >> + free_cpumask_var(per_cpu(cpus_in_cluster, cpu));
> >> + free_cpumask_var(per_cpu(ipi_mask, cpu));
> >> + err = -ENOMEM;
> >> + }
> >> + break;
> >>
> >> so it returns -ENOMEM if failed. And btw just noted that we forgot to make
> >> x2apic_init_cpu_notifier being in __init section.
> >>
> >> Or I miss something?
> >
> > Is there no GFP_NOFAIL or GFP_FAIL_ON_PANIC variant that could be used the
> > 'must not
> > fail' property of the boot-time allocation?
> >
> > Thanks,
> >
> > Ingo
> >
>
> If only i'm not missing something obvious we can set GFP_NOFAIL ending
> in endless loop if allocation failed (slab should be already running
> at this point of boot). Probably another option might be to switch to
> no-apic mode if there is no enough memory to allocate this masks
> (though i guess if allocation failed at this point we likely to fail
> in further allocations in kernel anyway)

Ok, if it's boot time only then it's no big deal.

Thanks,

Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/