Re: [Xen-devel] [PATCH] Xen PCI fronted fixes for 2.6.39

[Ian Campbell]

On Wed, 2011-02-16 at 22:17 +0000, Konrad Rzeszutek Wilk wrote:
> I am proposing these three patches for 2.6.39.
> 
> The first is to take advantage of the new method of requesting
> a Linux IRQ and providing the Xen PIRQ value. The second
> makes it possible for a PV guest to bootup if the backend has provided
> incorrect values. [*2]

I approve of being liberal in what is accepted but do we also have a
handle on why the backend is providing incorrect values in the first
place?

> 
> Lastly, the third is to remove deprecated code.
> 
> Konrad Rzeszutek Wilk (2):
>       pci/xen: Use xen_allocate_pirq_msi
>       xen-pcifront: Sanity check the MSI/MSI-X values
> 
> Tejun Heo (1):
>       xen-pcifront: don't use flush_scheduled_work()
> 
>  arch/x86/pci/xen.c         |    6 +++---
>  drivers/pci/xen-pcifront.c |   20 +++++++++++++++-----
>  2 files changed, 18 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
> index 25cd4a0..6432f75 100644
> --- a/arch/x86/pci/xen.c
> +++ b/arch/x86/pci/xen.c
> @@ -157,14 +157,14 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>  		goto error;
>  	i = 0;
>  	list_for_each_entry(msidesc, &dev->msi_list, list) {
> -		irq = xen_allocate_pirq(v[i], 0, /* not sharable */
> +		xen_allocate_pirq_msi(
>  			(type == PCI_CAP_ID_MSIX) ?
> -			"pcifront-msi-x" : "pcifront-msi");
> +			"pcifront-msi-x" : "pcifront-msi",
> +			&irq, &v[i], XEN_ALLOC_IRQ);
>  		if (irq < 0) {
>  			ret = -1;
>  			goto free;
>  		}
> -
>  		ret = set_irq_msi(irq, msidesc);
>  		if (ret)
>  			goto error_while;
> diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
> index 3a5a6fc..dd615d9 100644
> --- a/drivers/pci/xen-pcifront.c
> +++ b/drivers/pci/xen-pcifront.c
> @@ -277,13 +277,20 @@ static int pci_frontend_enable_msix(struct pci_dev *dev,
>  	if (likely(!err)) {
>  		if (likely(!op.value)) {
>  			/* we get the result */
> -			for (i = 0; i < nvec; i++)
> +			for (i = 0; i < nvec; i++) {
> +				if (op.msix_entries[i].vector <= 0) {
> +					dev_warn(&dev->dev, "MSI-X entry %d" \
> +						" is zero!\n", i);
> +					err = -EINVAL;
> +					continue;
> +				}
>  				*(*vector+i) = op.msix_entries[i].vector;
> -			return 0;
> +			}
> +			return err;
>  		} else {
>  			printk(KERN_DEBUG "enable msix get value %x\n",
>  				op.value);
> -			return op.value;
> +			return err;
>  		}
>  	} else {
>  		dev_err(&dev->dev, "enable msix get err %x\n", err);
> @@ -325,6 +332,10 @@ static int pci_frontend_enable_msi(struct pci_dev *dev, int **vector)
>  	err = do_pci_op(pdev, &op);
>  	if (likely(!err)) {
>  		*(*vector) = op.value;
> +		if (op.value <= 0) {
> +			dev_warn(&dev->dev, "MSI entry is zero!\n");
> +			err = -EINVAL;
> +		}
>  	} else {
>  		dev_err(&dev->dev, "pci frontend enable msi failed for dev "
>  				    "%x:%x\n", op.bus, op.devfn);
> @@ -733,8 +744,7 @@ static void free_pdev(struct pcifront_device *pdev)
>  
>  	pcifront_free_roots(pdev);
>  
> -	/*For PCIE_AER error handling job*/
> -	flush_scheduled_work();
> +	cancel_work_sync(&pdev->op_work);
>  
>  	if (pdev->irq >= 0)
>  		unbind_from_irqhandler(pdev->irq, pdev);
> 
> 
> [*2]: as so:
> 
>     0.877864] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
> [    0.877874] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
> [    0.877957] e1000e 0000:00:00.0: enabling device (0000 -> 0002)
> [    0.878054] e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ27
> [    0.878056] e1000e 0000:00:00.0: setting latency timer to 64
> [    0.879924] e1000e 0000:00:00.0: MSI-X entry 0 is zero!
> [    0.879935] e1000e 0000:00:00.0: MSI-X entry 1 is zero!
> [    0.879940] e1000e 0000:00:00.0: MSI-X entry 2 is zero!
> [    0.880207] e1000e 0000:00:00.0: (unregistered net_device): Failed to initialize MSI-X interrupts.  Falling back to MSI interrupts.
> [    0.880730] e1000e 0000:00:00.0: MSI entry is zero!
> [    0.880788] e1000e 0000:00:00.0: (unregistered net_device): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
> [    0.880945] e1000e 0000:00:00.0: Disabling ASPM L0s 
> [    0.977188] e1000e 0000:00:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:61:49:00
> [    0.977201] e1000e 0000:00:00.0: eth0: Intel(R) PRO/1000 Network Connection
> [    0.977217] e1000e 0000:00:00.0: eth0: MAC: 3, PHY: 8, PBA No: E46981-003
> ...
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/