Re: [PATCH repost 4/4] avr32: at32ap700x: specify DMA src and dstmasters

[Jamie Iles]

On Mon, Feb 21, 2011 at 02:45:00PM +0100, Hans-Christian Egtvedt wrote:
> On Fri, 2011-01-21 at 14:11 +0000, Jamie Iles wrote: 
> > Now that the dw_dmac DMA driver supports configurable source and
> > destination masters we need to specify which ones to use. This was
> > previously hardcoded to 0 and 1 respectively in the driver.
> > 
> > Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@xxxxxxxxx>
> > Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
> > Signed-off-by: Jamie Iles <jamie@xxxxxxxxxxxxx>
> > ---
> >  arch/avr32/mach-at32ap/at32ap700x.c |    6 ++++++
> >  1 files changed, 6 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
> > index e67c999..2747cde 100644
> > --- a/arch/avr32/mach-at32ap/at32ap700x.c
> > +++ b/arch/avr32/mach-at32ap/at32ap700x.c
> > @@ -2048,6 +2048,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
> >  		rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
> >  		rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3);
> >  		rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
> > +		rx_dws->src_master = 0;
> > +		rx_dws->dst_master = 1;
> >  	}
> >  
> >  	/* Check if DMA slave interface for playback should be configured. */
> > @@ -2056,6 +2058,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
> >  		tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
> >  		tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
> >  		tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
> > +		rx_dws->src_master = 0;
> > +		rx_dws->dst_master = 1;
> 
> Spotted by Nicolas Ferre, you use the wrong struct here, should be
> tx_dws, not rx_dws.

Apologies, here's a patch to fix it up.

Jamie

8<--------